From: J Keerthy <j-keerthy@ti.com>
To: b-cousson@ti.com, devicetree-discuss@lists.ozlabs.org
Cc: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
ldewangan@nvidia.com, grant.likely@secretlab.ca,
swarren@wwwdotorg.org, swarren@nvidia.com, sameo@linux.intel.com,
gg@slimlogic.co.uk, lee.jones@linaro.org,
J Keerthy <j-keerthy@ti.com>
Subject: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties
Date: Mon, 10 Jun 2013 14:34:19 +0530 [thread overview]
Message-ID: <1370855059-5342-3-git-send-email-j-keerthy@ti.com> (raw)
In-Reply-To: <1370855059-5342-1-git-send-email-j-keerthy@ti.com>
Add palmas node and omap specific palmas regulator properties.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 147 ++++++++++++++++++++++++++++++++++++++
1 files changed, 147 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 927db1e..ffbcc3f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -8,6 +8,8 @@
/dts-v1/;
#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "TI OMAP5 uEVM board";
@@ -254,6 +256,151 @@
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
+
+ palmas: palmas@48 {
+ reg = <0x48>;
+ /* SPI = 0, IRQ# = 7, active high level-sensitive */
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N */
+ interrupt-parent = <&gic>;
+ };
+
+};
+
+#include "palmas.dtsi"
+
+&palmas {
+ palmas_pmic {
+ ti,ldo6-vibrator;
+
+ regulators {
+ smps123_reg: smps123 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps7_reg: smps7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8_reg: smps8 {
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1310000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps9_reg: smps9 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,smps-range = <0x80>;
+ };
+
+ smps10_reg: smps10 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
&i2c5 {
--
1.7.5.4
next prev parent reply other threads:[~2013-06-10 9:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-10 9:04 [PATCH v2 0/2] ARM: dts: Add palmas dtsi J Keerthy
2013-06-10 9:04 ` [PATCH v2 1/2] ARM: dts: add dtsi for palmas J Keerthy
[not found] ` <1370855059-5342-2-git-send-email-j-keerthy-l0cyMroinI0@public.gmane.org>
2013-06-10 9:25 ` Laxman Dewangan
2013-06-10 9:24 ` J, KEERTHY
2013-06-10 16:29 ` Stephen Warren
2013-06-11 4:10 ` J, KEERTHY
2013-06-10 9:04 ` J Keerthy [this message]
2013-06-10 10:05 ` [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap specific palmas regulator properties Lee Jones
2013-06-10 10:16 ` J, KEERTHY
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370855059-5342-3-git-send-email-j-keerthy@ti.com \
--to=j-keerthy@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gg@slimlogic.co.uk \
--cc=grant.likely@secretlab.ca \
--cc=ldewangan@nvidia.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=swarren@nvidia.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).