devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <dinguyen@altera.com>
To: linux-mmc@vger.kernel.org
Cc: cjb@laptop.org, Dinh Nguyen <dinguyen@altera.com>,
	Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
	Pavel Machek <pavel@denx.de>,
	Grant Likely <grant.likely@linaro.org>,
	Rob Herring <rob.herring@calxeda.com>,
	devicetree-discuss@lists.ozlabs.org, linux@arm.linux.org.uk
Subject: [PATCH 1/2] ARM: socfpga: dts: Add support for SD/MMC
Date: Tue, 11 Jun 2013 19:28:43 -0500	[thread overview]
Message-ID: <1370996924-23048-2-git-send-email-dinguyen@altera.com> (raw)
In-Reply-To: <1370996924-23048-1-git-send-email-dinguyen@altera.com>

From: Dinh Nguyen <dinguyen@altera.com>

Add bindings for SD/MMC for SOCFPGA.
Add "syscon" to the "altr,sys-mgr" binding.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-mmc@vger.kernel.org
CC: <linux@arm.linux.org.uk>

v2:
- Add "syscon" to "altr,sys-mgr"
- Remove pwr-en field
---
 .../devicetree/bindings/mmc/socfpga-dw-mshc.txt    |   60 ++++++++++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |   13 ++++-
 arch/arm/boot/dts/socfpga_cyclone5.dts             |   13 +++++
 arch/arm/boot/dts/socfpga_vt.dts                   |   12 ++++
 4 files changed, 97 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt

diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 0000000..9d7062c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,60 @@
+* Altera SOCFPGA specific extensions to the Synopsis Designware Mobile
+  Storage Host Controller
+
+Required Properties:
+
+* compatible: should be
+	- "altr,socfpga-dw-mshc": for controllers with Altera SOCFPGA
+	  specific extentions.
+
+* altr,dw-mshc-ciu-div: Specifies the divider value for the card interface
+  unit (ciu) clock. The value should be (n-1). For Altera's SOCFPGA, the divider
+  value is fixed at 3, which mean parent_clock/4.
+
+* altr,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
+  in transmit mode and CIU clock phase shift value in receive mode for single
+  data rate mode operation. Refer notes below for the order of the cells and the
+  valid values.
+
+  Notes for the sdr-timing values:
+
+    The order of the cells should be
+      - First Cell: CIU clock phase shift value for RX mode, smplsel bits in
+	the system manager SDMMC control group.
+      - Second Cell: CIU clock phase shift value for TX mode, drvsel bits in
+	the system manager SDMMC control group.
+
+    Valid values for SDR CIU clock timing for SOCFPGA:
+      - valid value for tx phase shift and rx phase shift is 0 to 7.
+
+Required properties for a slot:
+
+* bus-width: Data width for card slot. 4-bit or 8-bit data.
+
+Example:
+
+  The MSHC controller node can be split into two portions, SoC specific and
+  board specific portions as listed below.
+
+	dwmmc0@ff704000 {
+		compatible = "altr,socfpga-dw-mshc";
+		reg = <0xff704000 0x1000>;
+		interrupts = <0 139 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dwmmc0@ff704000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x400>;
+		altr,dw-mshc-ciu-div = <3>;
+      		altr,dw-mshc-sdr-timing = <0 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+		};
+	};
+
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index bee62a2..dbf7f22 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -468,6 +468,17 @@
 			cache-level = <2>;
 		};
 
+		mmc: dwmmc0@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+		};
+
 		/* Local timer */
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
@@ -521,7 +532,7 @@
 			};
 
 		sysmgr@ffd08000 {
-				compatible = "altr,sys-mgr";
+				compatible = "altr,sys-mgr", "syscon";
 				reg = <0xffd08000 0x4000>;
 			};
 	};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts
index 973999d..1853cb1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dts
@@ -54,6 +54,19 @@
 			status = "okay";
 		};
 
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			supports-highspeed;
+			broken-cd;
+			altr,dw-mshc-ciu-div = <3>;
+			altr,dw-mshc-sdr-timing = <0 3>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+			};
+		};
+
 		timer0@ffc08000 {
 			clock-frequency = <100000000>;
 		};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index d1ec0ca..d93deb0 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -46,6 +46,18 @@
 			status = "okay";
 		};
 
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			supports-highspeed;
+			broken-cd;
+			altr,dw-mshc-ciu-div = <3>;
+
+			slot@0 {
+				reg = <0>;
+				bus-width = <4>;
+			};
+		};
+
 		timer0@ffc08000 {
 			clock-frequency = <7000000>;
 		};
-- 
1.7.9.5



       reply	other threads:[~2013-06-12  0:28 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1370996924-23048-1-git-send-email-dinguyen@altera.com>
2013-06-12  0:28 ` dinguyen [this message]
2013-06-12  1:47   ` [PATCH 1/2] ARM: socfpga: dts: Add support for SD/MMC Rob Herring
2013-06-12 15:04     ` Dinh Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370996924-23048-2-git-send-email-dinguyen@altera.com \
    --to=dinguyen@altera.com \
    --cc=arnd@arndb.de \
    --cc=cjb@laptop.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@linaro.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=olof@lixom.net \
    --cc=pavel@denx.de \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).