From: <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
To: linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Subject: [PATCHv2 1/2] ARM: socfpga: dts: Add support for SD/MMC
Date: Wed, 12 Jun 2013 10:18:50 -0500 [thread overview]
Message-ID: <1371050331-31331-1-git-send-email-dinguyen@altera.com> (raw)
From: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
Add bindings for SD/MMC for SOCFPGA.
Add "syscon" to the "altr,sys-mgr" binding.
Signed-off-by: Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>
CC: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
CC: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
Cc: Pavel Machek <pavel-ynQEQJNshbs@public.gmane.org>
Cc: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Chris Ball <cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org>
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Cc: linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
CC: <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
v2:
- Fixed misspellings extentions->extensions
---
.../devicetree/bindings/mmc/socfpga-dw-mshc.txt | 60 ++++++++++++++++++++
arch/arm/boot/dts/socfpga.dtsi | 13 ++++-
arch/arm/boot/dts/socfpga_cyclone5.dts | 13 +++++
arch/arm/boot/dts/socfpga_vt.dts | 12 ++++
4 files changed, 97 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 0000000..f218bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,60 @@
+* Altera SOCFPGA specific extensions to the Synopsis Designware Mobile
+ Storage Host Controller
+
+Required Properties:
+
+* compatible: should be
+ - "altr,socfpga-dw-mshc": for controllers with Altera SOCFPGA
+ specific extensions.
+
+* altr,dw-mshc-ciu-div: Specifies the divider value for the card interface
+ unit (ciu) clock. The value should be (n-1). For Altera's SOCFPGA, the divider
+ value is fixed at 3, which mean parent_clock/4.
+
+* altr,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for single
+ data rate mode operation. Refer notes below for the order of the cells and the
+ valid values.
+
+ Notes for the sdr-timing values:
+
+ The order of the cells should be
+ - First Cell: CIU clock phase shift value for RX mode, smplsel bits in
+ the system manager SDMMC control group.
+ - Second Cell: CIU clock phase shift value for TX mode, drvsel bits in
+ the system manager SDMMC control group.
+
+ Valid values for SDR CIU clock timing for SOCFPGA:
+ - valid value for tx phase shift and rx phase shift is 0 to 7.
+
+Required properties for a slot:
+
+* bus-width: Data width for card slot. 4-bit or 8-bit data.
+
+Example:
+
+ The MSHC controller node can be split into two portions, SoC specific and
+ board specific portions as listed below.
+
+ dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x400>;
+ altr,dw-mshc-ciu-div = <3>;
+ altr,dw-mshc-sdr-timing = <0 3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index bee62a2..dbf7f22 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -468,6 +468,17 @@
cache-level = <2>;
};
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
@@ -521,7 +532,7 @@
};
sysmgr@ffd08000 {
- compatible = "altr,sys-mgr";
+ compatible = "altr,sys-mgr", "syscon";
reg = <0xffd08000 0x4000>;
};
};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts
index 973999d..1853cb1 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dts
@@ -54,6 +54,19 @@
status = "okay";
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ altr,dw-mshc-ciu-div = <3>;
+ altr,dw-mshc-sdr-timing = <0 3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
timer0@ffc08000 {
clock-frequency = <100000000>;
};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index d1ec0ca..d93deb0 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -46,6 +46,18 @@
status = "okay";
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ altr,dw-mshc-ciu-div = <3>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
timer0@ffc08000 {
clock-frequency = <7000000>;
};
--
1.7.9.5
next reply other threads:[~2013-06-12 15:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-12 15:18 dinguyen-EIB2kfCEclfQT0dZR+AlfA [this message]
[not found] <1371588170-17149-1-git-send-email-dinguyen@altera.com>
2013-06-18 20:42 ` [PATCHv2 1/2] ARM: socfpga: dts: Add support for SD/MMC dinguyen
2013-06-20 1:54 ` Jaehoon Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371050331-31331-1-git-send-email-dinguyen@altera.com \
--to=dinguyen-eib2kfceclfqt0dzr+alfa@public.gmane.org \
--cc=cjb-2X9k7bc8m7Mdnm+yROfE0A@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pavel-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).