From: Suman Anna <s-anna@ti.com>
To: Tony Lindgren <tony@atomide.com>, Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>, Ohad Ben-Cohen <ohad@wizery.com>,
Omar Ramirez Luna <omar.ramirez@copitl.com>,
Jassi Brar <jaswinder.singh@linaro.org>,
Loic Pallardy <loic.pallardy@st.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org, Suman Anna <s-anna@ti.com>
Subject: [PATCH 3/3] ARM: dts: OMAP2+: Add mailbox nodes
Date: Tue, 18 Jun 2013 17:35:00 -0500 [thread overview]
Message-ID: <1371594900-37640-1-git-send-email-s-anna@ti.com> (raw)
The mailbox DT node data has been added for OMAP2420,
OMAP2430, OMAP3430/OMAP3630, OMAP44xx devices. Data for
OMAP5 is skipped for now since the corresponding hwmod
entry is not present.
The mailbox static device initialization logic is also
adjusted for a DT boot.
Signed-off-by: Suman Anna <s-anna@ti.com>
---
arch/arm/boot/dts/omap2420.dtsi | 13 +++++++++++++
arch/arm/boot/dts/omap2430.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap3.dtsi | 12 ++++++++++++
arch/arm/boot/dts/omap4.dtsi | 12 ++++++++++++
arch/arm/mach-omap2/devices.c | 2 +-
5 files changed, 50 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index c8f9c55..e0f4e47 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -114,6 +114,19 @@
dma-names = "tx", "rx";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>, /* DSP Interrupt */
+ <34>; /* IVA Interrupt */
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
+ #ti,mbox-data-cells = <4>;
+ ti,mbox-names = "dsp", "iva";
+ ti,mbox-data = <0 1 0 0>, <2 3 1 3>;
+ };
+
timer1: timer@48028000 {
compatible = "ti,omap2420-timer";
reg = <0x48028000 0x400>;
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c535a5a..b413423 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -175,6 +175,18 @@
dma-names = "tx", "rx";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <4>;
+ ti,mbox-num-fifos = <6>;
+ #ti,mbox-data-cells = <4>;
+ ti,mbox-names = "dsp";
+ ti,mbox-data = <0 1 0 0>;
+ };
+
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 6d05ee0..3cc7c28 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -380,6 +380,18 @@
dma-names = "tx", "rx";
};
+ mailbox: mailbox@48094000 {
+ compatible = "ti,omap2-mailbox";
+ reg = <0x48094000 0x200>;
+ interrupts = <26>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <2>;
+ ti,mbox-num-fifos = <2>;
+ #ti,mbox-data-cells = <4>;
+ ti,mbox-names = "dsp";
+ ti,mbox-data = <0 1 0 0>;
+ };
+
timer1: timer@48318000 {
compatible = "ti,omap3430-timer";
reg = <0x48318000 0x400>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 463b97d..0155182 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -516,6 +516,18 @@
};
};
+ mailbox: mailbox@4a0f4000 {
+ compatible = "ti,omap4-mailbox";
+ reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mailbox";
+ ti,mbox-num-users = <3>;
+ ti,mbox-num-fifos = <8>;
+ #ti,mbox-data-cells = <4>;
+ ti,mbox-names = "mbox-ipu", "mbox-dsp";
+ ti,mbox-data = <0 1 0 0>, <3 2 0 0>;
+ };
+
timer1: timer@4a318000 {
compatible = "ti,omap3430-timer";
reg = <0x4a318000 0x80>;
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 73762ac..2058f24 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -655,11 +655,11 @@ static int __init omap2_init_devices(void)
omap_init_audio();
omap_init_camera();
omap_init_hdmi_audio();
- omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
omap_init_control_usb();
omap_init_dmic();
+ omap_init_mbox();
omap_init_mcpdm();
omap_init_mcspi();
omap_init_sham();
--
1.8.3.1
next reply other threads:[~2013-06-18 22:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 22:35 Suman Anna [this message]
2013-06-20 2:11 ` [PATCH 3/3] ARM: dts: OMAP2+: Add mailbox nodes Russ Dill
2013-06-20 21:57 ` Cousson, Benoit
2013-06-20 22:28 ` Suman Anna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371594900-37640-1-git-send-email-s-anna@ti.com \
--to=s-anna@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jaswinder.singh@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=loic.pallardy@st.com \
--cc=ohad@wizery.com \
--cc=omar.ramirez@copitl.com \
--cc=paul@pwsan.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox