From: Tero Kristo <t-kristo@ti.com>
To: linux-omap@vger.kernel.org, mturquette@linaro.org,
paul@pwsan.com, tony@atomide.com, nm@ti.com, rnayak@ti.com
Cc: linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org
Subject: [PATCHv2 02/11] CLK: use of_property_read_u32 instead of read_u8
Date: Wed, 19 Jun 2013 16:18:53 +0300 [thread overview]
Message-ID: <1371647942-4811-3-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1371647942-4811-1-git-send-email-t-kristo@ti.com>
of_property_read_u8 does not work properly because of endianess problem
with its current implementation, and this causes it to always return
0 with little endian architectures. Instead, use property_read_u32
until this is fixed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/clk-divider.c | 4 ++--
drivers/clk/clk-gate.c | 4 ++--
drivers/clk/clk-mux.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 17ea475..3413602 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -361,7 +361,7 @@ void of_divider_clk_setup(struct device_node *node)
const char *parent_name;
u8 clk_divider_flags = 0;
u32 mask = 0;
- u8 shift = 0;
+ u32 shift = 0;
struct clk_div_table *table;
of_property_read_string(node, "clock-output-names", &clk_name);
@@ -375,7 +375,7 @@ void of_divider_clk_setup(struct device_node *node)
return;
}
- if (of_property_read_u8(node, "bit-shift", &shift)) {
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
shift = __ffs(mask);
pr_debug("%s: bit-shift property defaults to 0x%x for %s\n",
__func__, shift, node->name);
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 72cf99d..61b4dc1 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -162,7 +162,7 @@ void of_gate_clk_setup(struct device_node *node)
void __iomem *reg;
const char *parent_name;
u8 clk_gate_flags = 0;
- u8 bit_idx = 0;
+ u32 bit_idx = 0;
of_property_read_string(node, "clock-output-names", &clk_name);
@@ -170,7 +170,7 @@ void of_gate_clk_setup(struct device_node *node)
reg = of_iomap(node, 0);
- if (of_property_read_u8(node, "bit-shift", &bit_idx)) {
+ if (of_property_read_u32(node, "bit-shift", &bit_idx)) {
pr_err("%s: missing bit-shift property for %s\n",
__func__, node->name);
return;
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index c9f9f32..e63dd1b 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -170,7 +170,7 @@ void of_mux_clk_setup(struct device_node *node)
int i;
u8 clk_mux_flags = 0;
u32 mask = 0;
- u8 shift = 0;
+ u32 shift = 0;
of_property_read_string(node, "clock-output-names", &clk_name);
@@ -194,7 +194,7 @@ void of_mux_clk_setup(struct device_node *node)
return;
}
- if (of_property_read_u8(node, "bit-shift", &shift)) {
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
shift = __ffs(mask);
pr_debug("%s: bit-shift property defaults to 0x%x for %s\n",
__func__, shift, node->name);
--
1.7.9.5
next prev parent reply other threads:[~2013-06-19 13:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-19 13:18 [PATCHv2 00/11] ARM: OMAP4 clock data conversion to DT Tero Kristo
2013-06-19 13:18 ` [PATCHv2 01/11] CLK: clkdev: add support for looking up clocks from DT Tero Kristo
2013-06-19 13:18 ` Tero Kristo [this message]
[not found] ` <1371647942-4811-3-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2013-06-21 0:57 ` [PATCHv2 02/11] CLK: use of_property_read_u32 instead of read_u8 Mike Turquette
2013-06-21 12:45 ` Nishanth Menon
2013-06-21 16:21 ` Mike Turquette
2013-06-19 13:18 ` [PATCHv2 03/11] CLK: divider: fix table parsing logic for DT Tero Kristo
2013-06-19 13:18 ` [PATCHv2 04/11] clk: omap: introduce clock driver Tero Kristo
2013-06-19 13:18 ` [PATCHv2 05/11] CLK: OMAP4: Add DPLL clock support Tero Kristo
2013-06-19 13:18 ` [PATCHv2 06/11] CLK: omap: move part of the machine specific clock header contents to driver Tero Kristo
2013-06-21 7:32 ` Tony Lindgren
2013-06-24 7:42 ` Tero Kristo
2013-06-19 13:18 ` [PATCHv2 07/11] ARM: OMAP: clock: add DT duplicate clock registration mechanism Tero Kristo
2013-06-19 13:18 ` [PATCHv2 08/11] CLK: omap: add autoidle support Tero Kristo
2013-06-19 13:19 ` [PATCHv2 09/11] CLK: omap: add support for OMAP gate clock Tero Kristo
2013-06-19 13:19 ` [PATCHv2 10/11] ARM: dts: omap4 clock data Tero Kristo
2013-06-19 13:30 ` Nishanth Menon
2013-06-19 13:49 ` Tero Kristo
2013-06-19 13:56 ` Nishanth Menon
2013-06-21 1:24 ` Stephen Boyd
2013-06-24 7:39 ` Tero Kristo
2013-06-19 13:19 ` [PATCHv2 11/11] ARM: OMAP4: register DT clocks and remove old data Tero Kristo
2013-06-21 7:25 ` Tony Lindgren
2013-06-24 7:45 ` Tero Kristo
2013-06-24 7:50 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371647942-4811-3-git-send-email-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).