devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
	sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	ian-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org,
	gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org,
	grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	kishon-l0cyMroinI0@public.gmane.org
Subject: [PATCH 2/2] regulator: palmas: model SMPS10 as two regulators
Date: Thu, 20 Jun 2013 14:07:38 +0530	[thread overview]
Message-ID: <1371717458-10307-3-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1371717458-10307-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>

SMPS10 has two outputs OUT1 and OUT2 and have one input IN1.
SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either
in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 configures
it in BOOST mode. For BYPASS mode regulator_allow_bypass() API can be
used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be enabled using
regulator_enable().

Cc: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
 drivers/regulator/palmas-regulator.c |   39 ++++++++++++++++++++++++++++++----
 include/linux/mfd/palmas.h           |    9 ++++----
 2 files changed, 40 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 3ae44ac..7004bab 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -97,7 +97,12 @@ static const struct regs_info palmas_regs_info[] = {
 		.ctrl_addr	= PALMAS_SMPS9_CTRL,
 	},
 	{
-		.name		= "SMPS10",
+		.name		= "SMPS10_OUT1",
+		.sname		= "smps10-out2",
+		.ctrl_addr	= PALMAS_SMPS10_CTRL,
+	},
+	{
+		.name		= "SMPS10_OUT2",
 		.sname		= "smps10-in",
 		.ctrl_addr	= PALMAS_SMPS10_CTRL,
 	},
@@ -487,6 +492,8 @@ static struct regulator_ops palmas_ops_smps10 = {
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
+	.set_bypass		= regulator_set_bypass_regmap,
+	.get_bypass		= regulator_get_bypass_regmap,
 };
 
 static int palmas_is_enabled_ldo(struct regulator_dev *dev)
@@ -538,7 +545,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
 		return ret;
 
 	switch (id) {
-	case PALMAS_REG_SMPS10:
+	case PALMAS_REG_SMPS10_OUT1:
+	case PALMAS_REG_SMPS10_OUT2:
 		reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
 		if (reg_init->mode_sleep)
 			reg |= reg_init->mode_sleep <<
@@ -681,7 +689,8 @@ static struct of_regulator_match palmas_matches[] = {
 	{ .name = "smps7", },
 	{ .name = "smps8", },
 	{ .name = "smps9", },
-	{ .name = "smps10", },
+	{ .name = "smps10_out1", },
+	{ .name = "smps10_out2", },
 	{ .name = "ldo1", },
 	{ .name = "ldo2", },
 	{ .name = "ldo3", },
@@ -869,7 +878,25 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 		pmic->desc[id].id = id;
 
 		switch (id) {
-		case PALMAS_REG_SMPS10:
+		case PALMAS_REG_SMPS10_OUT1:
+			pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
+			pmic->desc[id].ops = &palmas_ops_smps10;
+			pmic->desc[id].vsel_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_CTRL);
+			pmic->desc[id].vsel_mask = SMPS10_VSEL;
+			pmic->desc[id].enable_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_CTRL);
+			pmic->desc[id].enable_mask = SMPS10_SWITCH_EN;
+			pmic->desc[id].bypass_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_CTRL);
+			pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
+			pmic->desc[id].min_uV = 3750000;
+			pmic->desc[id].uV_step = 1250000;
+			break;
+		case PALMAS_REG_SMPS10_OUT2:
 			pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
 			pmic->desc[id].ops = &palmas_ops_smps10;
 			pmic->desc[id].vsel_reg =
@@ -880,6 +907,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
 							PALMAS_SMPS10_CTRL);
 			pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+			pmic->desc[id].bypass_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+							PALMAS_SMPS10_CTRL);
+			pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
 			pmic->desc[id].min_uV = 3750000;
 			pmic->desc[id].uV_step = 1250000;
 			break;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 8f21daf..1bbcda9 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -138,7 +138,8 @@ enum palmas_regulators {
 	PALMAS_REG_SMPS7,
 	PALMAS_REG_SMPS8,
 	PALMAS_REG_SMPS9,
-	PALMAS_REG_SMPS10,
+	PALMAS_REG_SMPS10_OUT1,
+	PALMAS_REG_SMPS10_OUT2,
 	/* LDO regulators */
 	PALMAS_REG_LDO1,
 	PALMAS_REG_LDO2,
@@ -336,9 +337,9 @@ struct palmas_pmic {
 	int smps123;
 	int smps457;
 
-	int range[PALMAS_REG_SMPS10];
-	unsigned int ramp_delay[PALMAS_REG_SMPS10];
-	unsigned int current_reg_mode[PALMAS_REG_SMPS10];
+	int range[PALMAS_REG_SMPS10_OUT2];
+	unsigned int ramp_delay[PALMAS_REG_SMPS10_OUT2];
+	unsigned int current_reg_mode[PALMAS_REG_SMPS10_OUT2];
 };
 
 struct palmas_resource {
-- 
1.7.10.4

  parent reply	other threads:[~2013-06-20  8:37 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-20  8:37 [PATCH 0/2] Model SMPS10 regulator Kishon Vijay Abraham I
     [not found] ` <1371717458-10307-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-06-20  8:37   ` [PATCH 1/2] regulator: of: Added a property to indicate bypass mode support Kishon Vijay Abraham I
     [not found]     ` <1371717458-10307-2-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2013-06-20 11:20       ` Mark Brown
2013-06-20  8:37   ` Kishon Vijay Abraham I [this message]
2013-06-20 10:52     ` [PATCH 2/2] regulator: palmas: model SMPS10 as two regulators Laxman Dewangan
     [not found]       ` <51C2DEEB.9090600-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-06-20 13:50         ` Kishon Vijay Abraham I
2013-06-20 14:03           ` Laxman Dewangan
     [not found]             ` <51C30B95.4010406-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-06-20 14:19               ` Kishon Vijay Abraham I
     [not found]                 ` <51C30F60.3060100-l0cyMroinI0@public.gmane.org>
2013-06-20 14:44                   ` Laxman Dewangan
2013-06-20 15:26                     ` Kishon Vijay Abraham I
2013-06-21 13:25                       ` Laxman Dewangan
     [not found]                         ` <51C45448.4080201-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-06-21 14:00                           ` Kishon Vijay Abraham I
2013-06-22 13:12                             ` Laxman Dewangan
     [not found]                               ` <51C5A2BC.5060401-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-06-24  5:23                                 ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371717458-10307-3-git-send-email-kishon@ti.com \
    --to=kishon-l0cymroini0@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ian-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
    --cc=ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=swarren-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).