[PATCH 1/6] ARM: mx27: Replace clk_register_clkdev with clock DT lookup

[Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

From: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

Similarly as it was done for mx6q, use a DT lookup in order to make maintainance
task for the clock devices easier.

Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
[Markus Pargmann: Add gpio clocks]
Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/imx27.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 0695264..48c263c 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -208,6 +208,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			gpio2: gpio@10015100 {
@@ -218,6 +220,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			gpio3: gpio@10015200 {
@@ -228,6 +232,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			gpio4: gpio@10015300 {
@@ -238,6 +244,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			gpio5: gpio@10015400 {
@@ -248,6 +256,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			gpio6: gpio@10015500 {
@@ -258,6 +268,8 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				clocks = <&clks 47>;
+				clock-names = "ipg";
 			};
 
 			cspi3: cspi@10017000 {
-- 
1.8.2.1