[PATCH 0/8] ARM: dts: Add camera and barometer sensor support for TRATS2 board

[PATCH 0/8] ARM: dts: Add camera and barometer sensor support for TRATS2 board

[Sylwester Nawrocki]

This patch series includes some fixes and extensions to the Exynos
dts files to add the camera and barometer sensor support for TRATS2
board. It depends on a patch from Tomasz adding initial TRATS2
board dts file [1].

[1] http://www.spinics.net/lists/arm-kernel/msg253184.html

Jacek Anaszewski (1):
  ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board

Sylwester Nawrocki (7):
  ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs
  ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals
  ARM: dts: Add ISP power domain node for Exynos4x12
  ARM: dts: Use generic DMA bindings for Exynos4 SPI devices
  ARM: dts: Add camera nodes for Exynos4 SoCs
  ARM: dts: Add camera subsystem nodes to exynos4x12.dtsi
  ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board

 arch/arm/boot/dts/exynos4.dtsi            |   80 +++++++++++++++++--
 arch/arm/boot/dts/exynos4412-trats2.dts   |  106 +++++++++++++++++++++++++
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   61 ++++++++++++--
 arch/arm/boot/dts/exynos4x12.dtsi         |  123 +++++++++++++++++++++++++++++
 4 files changed, 357 insertions(+), 13 deletions(-)

--
1.7.9.5

[PATCH 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

[Sylwester Nawrocki]

Add separate nodes for the CAMCLK pin and turn off pull-up on camera
ports A, B. The video bus pins and the clock output (CAMCLK) pin need
separate nodes since full camera port is not used in some configurations,
e.g. for MIPI CSI-2 bus only CAMCLK is required and data/clock signal
use separate dedicated pins.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   40 ++++++++++++++++++++++++-----
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..50eaa95 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
 			samsung,pin-drv = <0>;
 		};
 
-		cam_port_a: cam-port-a {
+		cam_port_a_io: cam-port-a-io {
 			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
-					"gpj1-4";
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
 			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
 	};
@@ -778,16 +791,29 @@
 			samsung,pin-drv = <3>;
 		};
 
-		cam_port_b: cam-port-b {
+		cam_port_b_io: cam-port-b-io {
 			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
-					"gpm2-2";
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
 			samsung,pin-drv = <0>;
 		};
 
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
 		eint0: ext-int0 {
 			samsung,pins = "gpx0-0";
 			samsung,pin-function = <0xf>;
-- 
1.7.9.5

Re: [PATCH 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

[Tomasz Figa]

Hi Sylwester,

On Friday 21 of June 2013 14:50:17 Sylwester Nawrocki wrote:
> Add separate nodes for the CAMCLK pin and turn off pull-up on camera
> ports A, B. The video bus pins and the clock output (CAMCLK) pin need
> separate nodes since full camera port is not used in some
> configurations, e.g. for MIPI CSI-2 bus only CAMCLK is required and
> data/clock signal use separate dedicated pins.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   40
> ++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 7
> deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 704290f..50eaa95
> 100644
> --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
> @@ -401,13 +401,26 @@
>  			samsung,pin-drv = <0>;
>  		};
> 
> -		cam_port_a: cam-port-a {
> +		cam_port_a_io: cam-port-a-io {
>  			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", 
"gpj0-3",
>  					"gpj0-4", "gpj0-5", "gpj0-6", 
"gpj0-7",
> -					"gpj1-0", "gpj1-1", "gpj1-2", 
"gpj1-3",
> -					"gpj1-4";
> +					"gpj1-0", "gpj1-1", "gpj1-2", 
"gpj1-4";
>  			samsung,pin-function = <2>;
> -			samsung,pin-pud = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};
> +
> +		cam_port_a_clk_active: cam-port-a-clk-active {
> +			samsung,pins = "gpj1-3";
> +			samsung,pin-function = <2>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		cam_port_a_clk_idle: cam-port-a-clk-idle {
> +			samsung,pins = "gpj1-3";
> +			samsung,pin-function = <0>;
> +			samsung,pin-pud = <0>;
>  			samsung,pin-drv = <0>;

Who is driving the clock line in this configuration? Idle would suggest 
that neither the camera nor the camif, so I think some pull should be 
enabled to avoid floating pin. (Or is there an external pulling resistor 
for this line in most common setups?)

>  		};
>  	};
> @@ -778,16 +791,29 @@
>  			samsung,pin-drv = <3>;
>  		};
> 
> -		cam_port_b: cam-port-b {
> +		cam_port_b_io: cam-port-b-io {
>  			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", 
"gpm0-3",
>  					"gpm0-4", "gpm0-5", "gpm0-6", 
"gpm0-7",
> -					"gpm1-0", "gpm1-1", "gpm2-0", 
"gpm2-1",
> -					"gpm2-2";
> +					"gpm1-0", "gpm1-1", "gpm2-0", 
"gpm2-1";
>  			samsung,pin-function = <3>;
>  			samsung,pin-pud = <3>;
>  			samsung,pin-drv = <0>;
>  		};
> 
> +		cam_port_b_clk_active: cam-port-b-clk-active {
> +			samsung,pins = "gpm2-2";
> +			samsung,pin-function = <3>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <3>;
> +		};
> +
> +		cam_port_b_clk_idle: cam-port-b-clk-idle {
> +			samsung,pins = "gpm2-2";
> +			samsung,pin-function = <0>;
> +			samsung,pin-pud = <0>;
> +			samsung,pin-drv = <0>;
> +		};

Same here.

Otherwise looks fine to me.

Best regards,
Tomasz

> +
>  		eint0: ext-int0 {
>  			samsung,pins = "gpx0-0";
>  			samsung,pin-function = <0xf>;

Re: [PATCH 1/8] ARM: dts: Correct camera pinctrl nodes for Exynos4x12 SoCs

[Sylwester Nawrocki]

Hi Tomasz,

Thanks for the review.

On 06/23/2013 12:12 PM, Tomasz Figa wrote:
> On Friday 21 of June 2013 14:50:17 Sylwester Nawrocki wrote:
>> Add separate nodes for the CAMCLK pin and turn off pull-up on camera
>> ports A, B. The video bus pins and the clock output (CAMCLK) pin need
>> separate nodes since full camera port is not used in some
>> configurations, e.g. for MIPI CSI-2 bus only CAMCLK is required and
>> data/clock signal use separate dedicated pins.
>>
>> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   40
>> ++++++++++++++++++++++++----- 1 file changed, 33 insertions(+), 7
>> deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
>> b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index 704290f..50eaa95
>> 100644
>> --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
>> @@ -401,13 +401,26 @@
>>  			samsung,pin-drv = <0>;
>>  		};
>>
>> -		cam_port_a: cam-port-a {
>> +		cam_port_a_io: cam-port-a-io {
>>  			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", 
> "gpj0-3",
>>  					"gpj0-4", "gpj0-5", "gpj0-6", 
> "gpj0-7",
>> -					"gpj1-0", "gpj1-1", "gpj1-2", 
> "gpj1-3",
>> -					"gpj1-4";
>> +					"gpj1-0", "gpj1-1", "gpj1-2", 
> "gpj1-4";
>>  			samsung,pin-function = <2>;
>> -			samsung,pin-pud = <3>;
>> +			samsung,pin-pud = <0>;
>> +			samsung,pin-drv = <0>;
>> +		};
>> +
>> +		cam_port_a_clk_active: cam-port-a-clk-active {
>> +			samsung,pins = "gpj1-3";
>> +			samsung,pin-function = <2>;
>> +			samsung,pin-pud = <0>;
>> +			samsung,pin-drv = <3>;
>> +		};
>> +
>> +		cam_port_a_clk_idle: cam-port-a-clk-idle {
>> +			samsung,pins = "gpj1-3";
>> +			samsung,pin-function = <0>;
>> +			samsung,pin-pud = <0>;
>>  			samsung,pin-drv = <0>;
> 
> Who is driving the clock line in this configuration? Idle would suggest 
> that neither the camera nor the camif, so I think some pull should be 
> enabled to avoid floating pin. (Or is there an external pulling resistor 
> for this line in most common setups?)

In normal operation it is the AP SoC that feeds the clock to an external
image sensor. And the 'idle' pinctrl state is meant for a state where
the sensor is powered down completely or is in a suspend state that does
not require the sensor's master clock to be provided.

I took this configuration directly from the SoC vendor kernels, but it
indeed seems more appropriate to enable pull down on these pins in idle
state to avoid floating pins. If anything else is needed relevant
pinctrl nodes could be overridden in a board dts file.

I will update this and resend with pull down enabled.

Thanks,
Sylwester

[PATCH 2/8] ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals

[Sylwester Nawrocki]

Add pinctrl nodes for the ISP I2C0, ISP I2C1 and ISP UART devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4x12-pinctrl.dtsi |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 50eaa95..162a1b2 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -848,6 +848,27 @@
 			samsung,pin-pud = <0>;
 			samsung,pin-drv = <0>;
 		};
+
+		fimc_is_i2c0: fimc-is-i2c0 {
+			samsung,pins = "gpm4-0", "gpm4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_i2c1: fimc-is-i2c1 {
+			samsung,pins = "gpm4-2", "gpm4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_uart: fimc-is-uart {
+			samsung,pins = "gpm3-5", "gpm3-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	pinctrl@03860000 {
-- 
1.7.9.5

[PATCH 3/8] ARM: dts: Add ISP power domain node for Exynos4x12

[Sylwester Nawrocki]

The ISP power domain is a common power domain for FIMC-LITE
and FIMC-IS (camera ISP) devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4x12.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194..0e24d85 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -28,6 +28,11 @@
 		pinctrl3 = &pinctrl_3;
 	};
 
+	pd_isp: isp-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
 	clock: clock-controller@0x10030000 {
 		compatible = "samsung,exynos4412-clock";
 		reg = <0x10030000 0x20000>;
-- 
1.7.9.5

[PATCH 4/8] ARM: dts: Use generic DMA bindings for Exynos4 SPI devices

[Sylwester Nawrocki]

The Exynos4 SPI controller uses the PL330 DMA controller which has
migrated to the generic DMA bindings since commit b5be04d35dbb2e00
"spi: s3c64xx: Modify SPI driver to use generic DMA DT support".
Use the generic bindings to specify the corresponding DMA to make
the SPI usable again on Exynos4x12 SOCs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3f94fe8..bce2254 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -297,8 +297,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13920000 0x100>;
 		interrupts = <0 66 0>;
-		tx-dma-channel = <&pdma0 7>; /* preliminary */
-		rx-dma-channel = <&pdma0 6>; /* preliminary */
+		dmas = <&pdma0 7>, <&pdma0 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 327>, <&clock 159>;
@@ -312,8 +312,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13930000 0x100>;
 		interrupts = <0 67 0>;
-		tx-dma-channel = <&pdma1 7>; /* preliminary */
-		rx-dma-channel = <&pdma1 6>; /* preliminary */
+		dmas = <&pdma1 7>, <&pdma1 6>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 328>, <&clock 160>;
@@ -327,8 +327,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x13940000 0x100>;
 		interrupts = <0 68 0>;
-		tx-dma-channel = <&pdma0 9>; /* preliminary */
-		rx-dma-channel = <&pdma0 8>; /* preliminary */
+		dmas = <&pdma0 9>, <&pdma0 8>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&clock 329>, <&clock 161>;
-- 
1.7.9.5

[PATCH 5/8] ARM: dts: Add camera nodes for Exynos4 SoCs

[Sylwester Nawrocki]

This patch adds common FIMC and MIPI CSIS device nodes for Exynos4 SoCs.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com
---
 arch/arm/boot/dts/exynos4.dtsi |   68 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index bce2254..4d61120 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
 		i2c7 = &i2c_7;
+		csis0 = &csis_0;
+		csis1 = &csis_1;
+		fimc0 = &fimc_0;
+		fimc1 = &fimc_1;
+		fimc2 = &fimc_2;
+		fimc3 = &fimc_3;
 	};
 
 	chipid@10000000 {
@@ -92,6 +98,68 @@
 		reg = <0x10010000 0x400>;
 	};
 
+	camera {
+		compatible = "samsung,fimc", "simple-bus";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11800000 0x1000>;
+			interrupts = <0 84 0>;
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11810000 0x1000>;
+			interrupts = <0 85 0>;
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11820000 0x1000>;
+			interrupts = <0 86 0>;
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 87 0>;
+			samsung,power-domain = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x4000>;
+			interrupts = <0 78 0>;
+			bus-width = <4>;
+			samsung,power-domain = <&pd_cam>;
+			status = "disabled";
+		};
+
+		csis_1: csis@11890000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11890000 0x4000>;
+			interrupts = <0 80 0>;
+			bus-width = <2>;
+			samsung,power-domain = <&pd_cam>;
+			status = "disabled";
+		};
+	};
+
 	watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
-- 
1.7.9.5

[PATCH 6/8] ARM: dts: Add camera subsystem nodes to exynos4x12.dtsi

[Sylwester Nawrocki]

Add common camera node and Exynos4212/4412 specific nodes for
FIMC, MIPI-CSIS, FIMC-LITE and FIMC-IS devices.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4x12.dtsi |  118 +++++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 0e24d85..f8cc1d0 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -26,6 +26,8 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
 	};
 
 	pd_isp: isp-power-domain@10023CA0 {
@@ -78,4 +80,120 @@
 		clock-names = "sclk_fimg2d", "fimg2d";
 		status = "disabled";
 	};
+
+	camera {
+		clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>,
+		         <&clock 388>, <&clock 389>, <&clock 17>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
+			    "pxl_async1", "mux_cam0", "mux_cam1", "parent";
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4212-fimc";
+			clocks = <&clock 256>, <&clock 128>, <&clock 384>, <&clock 17>;
+			clock-names = "fimc", "sclk_fimc", "mux", "parent";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4212-fimc";
+			clocks = <&clock 257>, <&clock 129>, <&clock 385>, <&clock 17>;
+			clock-names = "fimc", "sclk_fimc", "mux", "parent";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4212-fimc";
+			clocks = <&clock 258>, <&clock 130>, <&clock 386>, <&clock 17>;
+			clock-names = "fimc", "sclk_fimc", "mux", "parent";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+			samsung,cam-if;
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4212-fimc";
+			clocks = <&clock 259>, <&clock 131>, <&clock 387>, <&clock 17>;
+			clock-names = "fimc", "sclk_fimc", "mux", "parent";
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+		};
+
+		csis_0: csis@11880000 {
+			clocks = <&clock 260>, <&clock 134>, <&clock 390>, <&clock 17>;
+			clock-names = "csis", "sclk_csis", "mux", "parent";
+		};
+
+		csis_1: csis@11890000 {
+			clocks = <&clock 261>, <&clock 135>, <&clock 391>, <&clock 17>;
+			clock-names = "csis", "sclk_csis", "mux", "parent";
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x12390000 0x1000>;
+			interrupts = <0 105 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x123A0000 0x1000>;
+			interrupts = <0 106 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 354>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_is: fimc-is@12000000 {
+			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			reg = <0x12000000 0x260000>;
+			interrupts = <0 90 0>, <0 95 0>;
+			samsung,power-domain = <&pd_isp>;
+			clocks = <&clock 353>, <&clock 354>, <&clock 355>,
+				<&clock 356>, <&clock 17>, <&clock 357>,
+				<&clock 358>, <&clock 359>, <&clock 360>,
+				<&clock 450>,<&clock 451>, <&clock 452>,
+				<&clock 453>, <&clock 176>, <&clock 13>,
+				<&clock 454>, <&clock 395>, <&clock 455>;
+			clock-names = "lite0", "lite1", "ppmuispx",
+				      "ppmuispmx", "mpll", "isp",
+				      "drc", "fd", "mcuisp",
+				      "ispdiv0", "ispdiv1", "mcuispdiv0",
+				      "mcuispdiv1", "uart", "aclk200",
+				      "div_aclk200", "aclk400mcuisp",
+				      "div_aclk400mcuisp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			pmu {
+				reg = <0x10020000 0x3000>;
+			};
+
+			i2c1_isp: i2c-isp@12140000 {
+				compatible = "samsung,exynos4212-i2c-isp";
+				reg = <0x12130000 0x100>;
+				clocks = <&clock 370>;
+				clock-names = "i2c_isp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
 };
-- 
1.7.9.5

[PATCH 7/8] ARM: dts: Add AK8975 device node for Exynos4412 TRATS2 board

[Sylwester Nawrocki]

From: Jacek Anaszewski <j.anaszewski@samsung.com>

This patch adds AK8975 magnetometer node and corresponding
i2c-gpio bus node for TRATS2 board.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 056b835..826e42e 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -453,4 +453,19 @@
 	serial@13830000 {
 		status = "okay";
 	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ak8975@0c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 0>;
+		};
+	};
 };
-- 
1.7.9.5

[PATCH 8/8] ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board

[Sylwester Nawrocki]

This patch enables the front camera using the internal
camera ISP (FIMC-IS).

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts |   91 +++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 826e42e..47c40df 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -58,6 +58,15 @@
 			enable-active-high;
 		};
 
+		cam_io_reg: voltage-regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_SENSOR_A";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 2 0>;
+			enable-active-high;
+		};
+
 		/* More to come */
 	};
 
@@ -468,4 +477,86 @@
 			gpios = <&gpj0 7 0>;
 		};
 	};
+
+	camera {
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_port_b_clk_active>;
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			clock-frequency = <160000000>;
+			status = "okay";
+		};
+
+		fimc_1: fimc@11810000 {
+			clock-frequency = <160000000>;
+			status = "okay";
+		};
+
+		fimc_2: fimc@11820000 {
+			clock-frequency = <160000000>;
+			status = "okay";
+		};
+
+		fimc_3: fimc@11830000 {
+			clock-frequency = <160000000>;
+			status = "okay";
+		};
+
+		csis_1: csis@11890000 {
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			clock-frequency = <160000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			/* Camera D (4) MIPI CSI-2 (CSIS1) */
+			port@4 {
+				reg = <4>;
+				csis1_ep: endpoint {
+					remote-endpoint = <&is_s5k6a3_ep>;
+					data-lanes = <1>;
+					samsung,csis-hs-settle = <18>;
+					samsung,csis-wclk;
+				};
+			};
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			status = "okay";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			status = "okay";
+		};
+
+		fimc-is@12000000 {
+			pinctrl-0 = <&fimc_is_uart>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			i2c1_isp: i2c-isp@12140000 {
+				pinctrl-0 = <&fimc_is_i2c1>;
+				pinctrl-names = "default";
+
+				s5k6a3@10 {
+					compatible = "samsung,s5k6a3";
+					reg = <0x10>;
+					svdda-supply = <&cam_io_reg>;
+					svddio-supply = <&ldo19_reg>;
+					clock-frequency = <24000000>;
+					samsung,camclk-out = <1>;
+					gpios = <&gpm1 6 0>;
+
+					port {
+						is_s5k6a3_ep: endpoint {
+							remote-endpoint = <&csis1_ep>;
+							data-lanes = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
 };
-- 
1.7.9.5