From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson" <b-cousson-l0cyMroinI0@public.gmane.org>,
"Mark Brown" <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Kevin Hilman
<khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [RFC PATCH V2 6/8] ARM: dts: TWL6030/OMAP4: Add OMAP voltage path linkage
Date: Fri, 21 Jun 2013 16:25:47 -0500 [thread overview]
Message-ID: <1371849949-12649-7-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1371849949-12649-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
OMAP4430 and 4460 platforms use TWL6030 to power voltage rails.
However, on 4460, we use twl6030 only for iva and core voltage rails.
Introduce an twl6030_omap4.dtsi to be able to reuse the base definition
for all OMAP4 platforms and the delta change only for panda-es platform
which is based on 4460.
Signed-off-by: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/omap4-panda-common.dtsi | 1 +
arch/arm/boot/dts/omap4-panda-es.dts | 13 +++++++++++
arch/arm/boot/dts/omap4-sdp.dts | 1 +
arch/arm/boot/dts/omap4-var-som.dts | 1 +
arch/arm/boot/dts/twl6030_omap4.dtsi | 35 +++++++++++++++++++++++++++++
5 files changed, 51 insertions(+)
create mode 100644 arch/arm/boot/dts/twl6030_omap4.dtsi
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 00cbaa5..2b15c2b 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -199,6 +199,7 @@
};
#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
&i2c2 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 56c4354..49017c5 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -62,3 +62,16 @@
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
+
+&omap_twl6030_vcore1 {
+ ti,vp = <&vp_core>;
+};
+
+&omap_twl6030_vcore2 {
+ ti,vp = <&vp_iva>;
+};
+
+&omap_twl6030_vcore3 {
+ /* We use TPS62361 on this platform instead */
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 7951b4e..2f81b4d5 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -337,6 +337,7 @@
};
#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
&i2c2 {
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts
index b41269e..6f0b763 100644
--- a/arch/arm/boot/dts/omap4-var-som.dts
+++ b/arch/arm/boot/dts/omap4-var-som.dts
@@ -40,6 +40,7 @@
};
#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
&i2c2 {
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
new file mode 100644
index 0000000..7724039
--- /dev/null
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -0,0 +1,35 @@
+/*
+ * TWL6030 entries specific for OMAP
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+ omap_twl6030_vcore1: vcore1 {
+ compatible = "ti,omap-twl6030-vcore1";
+ ti,boot-voltage-micro-volts = <1200000>;
+ ti,vp = <&vp_mpu>;
+ };
+
+ omap_twl6030_vcore2: vcore2 {
+ compatible = "ti,omap-twl6030-vcore2";
+ ti,boot-voltage-micro-volts = <1200000>;
+ ti,vp = <&vp_iva>;
+ };
+
+ omap_twl6030_vcore3: vcore3 {
+ compatible = "ti,omap-twl6030-vcore3";
+ ti,boot-voltage-micro-volts = <1200000>;
+ ti,vp = <&vp_core>;
+ };
+};
+
+&vc {
+ ti,i2c-high-speed;
+ ti,i2c-pad-load = <3>;
+};
--
1.7.9.5
next prev parent reply other threads:[~2013-06-21 21:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 21:25 [RFC PATCH V2 0/8] regulator/OMAP: support VC/VP support in dts Nishanth Menon
2013-06-21 21:25 ` [RFC PATCH V2 2/8] PM / AVS: Introduce support for OMAP Voltage Controller(VC) with device tree nodes Nishanth Menon
2013-06-21 21:25 ` [RFC PATCH V2 3/8] PM / AVS: Introduce support for OMAP Voltage Processor(VP) " Nishanth Menon
2013-06-21 21:25 ` [RFC PATCH V2 4/8] ARM: dts: OMAP4: add voltage controller nodes Nishanth Menon
2013-06-21 21:25 ` [RFC PATCH V2 5/8] ARM: dts: OMAP4: add voltage processor nodes Nishanth Menon
[not found] ` <1371849949-12649-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2013-06-21 21:25 ` [RFC PATCH V2 1/8] regulator: Introduce OMAP regulator to control PMIC over VC/VP Nishanth Menon
[not found] ` <1371849949-12649-2-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2013-07-04 15:41 ` Mark Brown
2013-07-05 13:55 ` Nishanth Menon
2013-07-05 14:08 ` Mark Brown
2013-07-05 14:50 ` Nishanth Menon
2013-07-05 16:52 ` Mark Brown
2013-07-05 17:33 ` Nishanth Menon
2013-07-05 17:47 ` Mark Brown
2013-07-08 17:22 ` Nishanth Menon
2013-07-09 15:29 ` Mark Brown
2013-07-09 16:04 ` Nishanth Menon
2013-07-10 9:19 ` Mark Brown
2013-06-21 21:25 ` Nishanth Menon [this message]
2013-06-21 21:25 ` [RFC PATCH V2 7/8] ARM: dts: omap4-panda-es: add TPS62361 supply for vdd_mpu Nishanth Menon
2013-06-21 21:25 ` [RFC PATCH V2 8/8] ARM: dts: OMAP4-panda-es: use tps regulator as cpu0 supply Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371849949-12649-7-git-send-email-nm@ti.com \
--to=nm-l0cymroini0@public.gmane.org \
--cc=b-cousson-l0cyMroinI0@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).