From: Prabhakar Lad <prabhakar.csengg@gmail.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>,
LMML <linux-media@vger.kernel.org>,
Hans Verkuil <hans.verkuil@cisco.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: DLOS <davinci-linux-open-source@linux.davincidsp.com>,
LKML <linux-kernel@vger.kernel.org>,
"Lad, Prabhakar" <prabhakar.csengg@gmail.com>,
Guennadi Liakhovetski <g.liakhovetski@gmx.de>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Grant Likely <grant.likely@secretlab.ca>,
Rob Herring <rob.herring@calxeda.com>,
Rob Landley <rob@landley.net>,
devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org
Subject: [PATCH v2 2/2] media: i2c: tvp7002: add OF support
Date: Sat, 22 Jun 2013 23:14:15 +0530 [thread overview]
Message-ID: <1371923055-29623-3-git-send-email-prabhakar.csengg@gmail.com> (raw)
In-Reply-To: <1371923055-29623-1-git-send-email-prabhakar.csengg@gmail.com>
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
add OF support for the tvp7002 driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Rob Landley <rob@landley.net>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
---
Depends on patch https://patchwork.kernel.org/patch/2765851/
.../devicetree/bindings/media/i2c/tvp7002.txt | 43 +++++++++++++
drivers/media/i2c/tvp7002.c | 67 ++++++++++++++++++--
2 files changed, 103 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp7002.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
new file mode 100644
index 0000000..9daebe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
@@ -0,0 +1,43 @@
+* Texas Instruments TV7002 video decoder
+
+The TVP7002 device supports digitizing of video and graphics signal in RGB and
+YPbPr color space.
+
+Required Properties :
+- compatible : Must be "ti,tvp7002"
+
+- hsync-active: HSYNC Polarity configuration for endpoint.
+
+- vsync-active: VSYNC Polarity configuration for endpoint.
+
+- pclk-sample: Clock polarity of the endpoint.
+
+- video-sync: Video sync property of the endpoint.
+
+- ti,tvp7002-fid-polarity: Active-high Field ID polarity of the endpoint.
+
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ tvp7002@5c {
+ compatible = "ti,tvp7002";
+ reg = <0x5c>;
+
+ port {
+ tvp7002_1: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ video-sync = <V4L2_MBUS_VIDEO_SYNC_ON_GREEN>;
+ ti,tvp7002-fid-polarity;
+ };
+ };
+ };
+ ...
+ };
diff --git a/drivers/media/i2c/tvp7002.c b/drivers/media/i2c/tvp7002.c
index b577548..4896024 100644
--- a/drivers/media/i2c/tvp7002.c
+++ b/drivers/media/i2c/tvp7002.c
@@ -35,6 +35,8 @@
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+
#include "tvp7002_reg.h"
MODULE_DESCRIPTION("TI TVP7002 Video and Graphics Digitizer driver");
@@ -943,6 +945,48 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
.pad = &tvp7002_pad_ops,
};
+static struct tvp7002_config *
+tvp7002_get_pdata(struct i2c_client *client)
+{
+ struct v4l2_of_endpoint bus_cfg;
+ struct tvp7002_config *pdata;
+ struct device_node *endpoint;
+ unsigned int flags;
+
+ if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+ return client->dev.platform_data;
+
+ endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+ if (!endpoint)
+ return NULL;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto done;
+
+ v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ pdata->hs_polarity = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ pdata->vs_polarity = 1;
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ pdata->clk_polarity = 1;
+
+ if (flags & V4L2_MBUS_VIDEO_SYNC_ON_GREEN)
+ pdata->sog_polarity = 1;
+
+ pdata->fid_polarity = of_property_read_bool(endpoint,
+ "ti,tvp7002-fid-polarity");
+
+done:
+ of_node_put(endpoint);
+ return pdata;
+}
+
/*
* tvp7002_probe - Probe a TVP7002 device
* @c: ptr to i2c_client struct
@@ -954,32 +998,32 @@ static const struct v4l2_subdev_ops tvp7002_ops = {
*/
static int tvp7002_probe(struct i2c_client *c, const struct i2c_device_id *id)
{
+ struct tvp7002_config *pdata = tvp7002_get_pdata(c);
struct v4l2_subdev *sd;
struct tvp7002 *device;
struct v4l2_dv_timings timings;
int polarity_a;
int polarity_b;
u8 revision;
-
int error;
+ if (pdata == NULL) {
+ dev_err(&c->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
- if (!c->dev.platform_data) {
- v4l_err(c, "No platform data!!\n");
- return -ENODEV;
- }
-
device = devm_kzalloc(&c->dev, sizeof(struct tvp7002), GFP_KERNEL);
if (!device)
return -ENOMEM;
sd = &device->sd;
- device->pdata = c->dev.platform_data;
+ device->pdata = pdata;
device->current_timings = tvp7002_timings;
/* Tell v4l2 the device is ready */
@@ -1085,9 +1129,18 @@ static const struct i2c_device_id tvp7002_id[] = {
};
MODULE_DEVICE_TABLE(i2c, tvp7002_id);
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tvp7002_of_match[] = {
+ { .compatible = "ti,tvp7002", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tvp7002_of_match);
+#endif
+
/* I2C driver data */
static struct i2c_driver tvp7002_driver = {
.driver = {
+ .of_match_table = of_match_ptr(tvp7002_of_match),
.owner = THIS_MODULE,
.name = TVP7002_MODULE_NAME,
},
--
1.7.9.5
next parent reply other threads:[~2013-06-22 17:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1371923055-29623-1-git-send-email-prabhakar.csengg@gmail.com>
2013-06-22 17:44 ` Prabhakar Lad [this message]
2013-06-30 15:57 ` [PATCH v2 2/2] media: i2c: tvp7002: add OF support Sylwester Nawrocki
2013-07-11 17:09 ` Prabhakar Lad
2013-07-11 22:04 ` Sylwester Nawrocki
2013-07-12 4:43 ` Prabhakar Lad
2013-07-14 19:42 ` Sylwester Nawrocki
2013-07-15 17:09 ` Prabhakar Lad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371923055-29623-3-git-send-email-prabhakar.csengg@gmail.com \
--to=prabhakar.csengg@gmail.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=g.liakhovetski@gmx.de \
--cc=grant.likely@secretlab.ca \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=s.nawrocki@samsung.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).