From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sachin Kamat Subject: [PATCH 1/1] of/documentation: Update s5m8767-regulator bindings document Date: Mon, 24 Jun 2013 15:06:57 +0530 Message-ID: <1372066617-23518-1-git-send-email-sachin.kamat@linaro.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, grant.likely@linaro.org, rob@landley.net, broonie@kernel.org, sachin.kamat@linaro.org, patches@linaro.org List-Id: devicetree@vger.kernel.org s5m8767 regulator is used on Exynos platforms which use pin controller to configure GPIOs. Update the example accordingly. Signed-off-by: Sachin Kamat --- .../bindings/regulator/s5m8767-regulator.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt index a35ff99..7364f71 100644 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -103,13 +103,13 @@ Example: s5m8767,pmic-buck-default-dvs-idx = <0>; - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */ - <&gpx0 1 1 0 0>, /* DVS2 */ - <&gpx0 2 1 0 0>; /* DVS3 */ + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ + <&gpx0 1 0>, /* DVS2 */ + <&gpx0 2 0>; /* DVS3 */ - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */ - <&gpx2 4 1 0 0>, /* SET2 */ - <&gpx2 5 1 0 0>; /* SET3 */ + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */ + <&gpx2 4 0>, /* SET2 */ + <&gpx2 5 0>; /* SET3 */ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, -- 1.7.9.5