devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tero Kristo <t-kristo@ti.com>
To: linux-omap@vger.kernel.org, paul@pwsan.com, tony@atomide.com,
	nm@ti.com, rnayak@ti.com, mturquette@linaro.org
Cc: linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org
Subject: [PATCHv3 6/9] CLK: omap: add autoidle support
Date: Tue, 25 Jun 2013 15:38:30 +0300	[thread overview]
Message-ID: <1372163913-16566-7-git-send-email-t-kristo@ti.com> (raw)
In-Reply-To: <1372163913-16566-1-git-send-email-t-kristo@ti.com>

OMAP clk driver now routes some of the basic clocks through own
registration routine to allow autoidle support. This routine just
checks a couple of device node properties and adds autoidle support
if required, and just passes the registration forward to basic clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/clock.c |    6 ++
 drivers/clk/omap/Makefile   |    2 +-
 drivers/clk/omap/autoidle.c |  130 +++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/omap/clk.c      |    4 +-
 include/linux/clk/omap.h    |    4 ++
 5 files changed, 143 insertions(+), 3 deletions(-)
 create mode 100644 drivers/clk/omap/autoidle.c

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6fe14b5..9bd66b4 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->allow_idle)
 			c->ops->allow_idle(c);
+
+	of_omap_clk_allow_autoidle_all();
+
 	return 0;
 }
 
@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void)
 	list_for_each_entry(c, &clk_hw_omap_clocks, node)
 		if (c->ops && c->ops->deny_idle)
 			c->ops->deny_idle(c);
+
+	of_omap_clk_deny_autoidle_all();
+
 	return 0;
 }
 
diff --git a/drivers/clk/omap/Makefile b/drivers/clk/omap/Makefile
index 4cad480..ca56700 100644
--- a/drivers/clk/omap/Makefile
+++ b/drivers/clk/omap/Makefile
@@ -1 +1 @@
-obj-y					+= clk.o dpll.o
+obj-y					+= clk.o dpll.o autoidle.o
diff --git a/drivers/clk/omap/autoidle.c b/drivers/clk/omap/autoidle.c
new file mode 100644
index 0000000..6424cb2
--- /dev/null
+++ b/drivers/clk/omap/autoidle.c
@@ -0,0 +1,130 @@
+/*
+ * OMAP clock autoidle support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/log2.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#ifdef CONFIG_OF
+struct clk_omap_autoidle {
+	void __iomem		*reg;
+	u8			shift;
+	u8			flags;
+	const char		*name;
+	struct list_head	node;
+};
+
+#define AUTOIDLE_LOW		0x1
+
+static LIST_HEAD(autoidle_clks);
+
+static void omap_allow_autoidle(struct clk_omap_autoidle *clk)
+{
+	u32 val;
+
+	val = readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val &= ~(1 << clk->shift);
+	else
+		val |= (1 << clk->shift);
+
+	writel(val, clk->reg);
+}
+
+static void omap_deny_autoidle(struct clk_omap_autoidle *clk)
+{
+	u32 val;
+
+	val = readl(clk->reg);
+
+	if (clk->flags & AUTOIDLE_LOW)
+		val |= (1 << clk->shift);
+	else
+		val &= ~(1 << clk->shift);
+
+	writel(val, clk->reg);
+}
+
+void of_omap_clk_allow_autoidle_all(void)
+{
+	struct clk_omap_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		omap_allow_autoidle(c);
+}
+
+void of_omap_clk_deny_autoidle_all(void)
+{
+	struct clk_omap_autoidle *c;
+
+	list_for_each_entry(c, &autoidle_clks, node)
+		omap_deny_autoidle(c);
+}
+
+static __init void of_omap_autoidle_setup(struct device_node *node)
+{
+	u32 shift;
+	void __iomem *reg;
+	struct clk_omap_autoidle *clk;
+
+	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
+		return;
+
+	reg = of_iomap(node, 0);
+
+	clk = kzalloc(sizeof(struct clk_omap_autoidle), GFP_KERNEL);
+
+	if (!clk) {
+		pr_err("%s: kzalloc failed\n", __func__);
+		return;
+	}
+
+	clk->shift = shift;
+	clk->name = node->name;
+	clk->reg = reg;
+
+	if (of_property_read_bool(node, "ti,autoidle-low"))
+		clk->flags |= AUTOIDLE_LOW;
+
+	list_add(&clk->node, &autoidle_clks);
+}
+
+void __init of_omap_divider_setup(struct device_node *node)
+{
+	of_divider_clk_setup(node);
+	of_omap_autoidle_setup(node);
+}
+EXPORT_SYMBOL_GPL(of_omap_divider_setup);
+CLK_OF_DECLARE(omap_autoidle_clock, "divider-clock", of_omap_divider_setup);
+
+void __init of_omap_fixed_factor_setup(struct device_node *node)
+{
+	of_fixed_factor_clk_setup(node);
+	of_omap_autoidle_setup(node);
+}
+EXPORT_SYMBOL_GPL(of_omap_fixed_factor_setup);
+CLK_OF_DECLARE(omap_fixed_factor_clock, "fixed-factor-clock",
+	of_omap_fixed_factor_setup);
+
+#endif
diff --git a/drivers/clk/omap/clk.c b/drivers/clk/omap/clk.c
index 1dafdaa..6be62ee 100644
--- a/drivers/clk/omap/clk.c
+++ b/drivers/clk/omap/clk.c
@@ -25,8 +25,8 @@ static const struct of_device_id clk_match[] = {
 	{.compatible = "fixed-clock", .data = of_fixed_clk_setup, },
 	{.compatible = "mux-clock", .data = of_mux_clk_setup, },
 	{.compatible = "fixed-factor-clock",
-		.data = of_fixed_factor_clk_setup, },
-	{.compatible = "divider-clock", .data = of_divider_clk_setup, },
+		.data = of_omap_fixed_factor_setup, },
+	{.compatible = "divider-clock", .data = of_omap_divider_setup, },
 	{.compatible = "gate-clock", .data = of_gate_clk_setup, },
 	{.compatible = "ti,omap4-dpll-clock", .data = of_omap4_dpll_setup, },
 	{},
diff --git a/include/linux/clk/omap.h b/include/linux/clk/omap.h
index eb7cfe6..f2a83a1 100644
--- a/include/linux/clk/omap.h
+++ b/include/linux/clk/omap.h
@@ -173,5 +173,9 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
 /* DT functions */
 int dt_omap_clk_init(void);
 void of_omap4_dpll_setup(struct device_node *node);
+void of_omap_fixed_factor_setup(struct device_node *node);
+void of_omap_divider_setup(struct device_node *node);
+void of_omap_clk_allow_autoidle_all(void);
+void of_omap_clk_deny_autoidle_all(void);
 
 #endif
-- 
1.7.9.5


  parent reply	other threads:[~2013-06-25 12:38 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-25 12:38 [PATCHv3 0/9] ARM: OMAP4 clock data conversion to DT Tero Kristo
2013-06-25 12:38 ` [PATCHv3 1/9] CLK: clkdev: add support for looking up clocks from DT Tero Kristo
2013-06-25 12:38 ` [PATCHv3 2/9] clk: omap: introduce clock driver Tero Kristo
2013-06-25 12:38 ` [PATCHv3 3/9] CLK: OMAP4: Add DPLL clock support Tero Kristo
2013-06-25 12:38 ` [PATCHv3 4/9] CLK: omap: move part of the machine specific clock header contents to driver Tero Kristo
2013-06-25 12:38 ` [PATCHv3 5/9] ARM: OMAP: clock: add DT duplicate clock registration mechanism Tero Kristo
2013-06-25 12:38 ` Tero Kristo [this message]
2013-06-25 12:38 ` [PATCHv3 7/9] CLK: omap: add support for OMAP gate clock Tero Kristo
2013-06-25 12:38 ` [PATCHv3 8/9] ARM: dts: omap4 clock data Tero Kristo
2013-06-25 12:38 ` [PATCHv3 9/9] ARM: OMAP4: register DT clocks and remove old data Tero Kristo
2013-06-25 15:03 ` [PATCHv3 0/9] ARM: OMAP4 clock data conversion to DT Peter Ujfalusi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372163913-16566-7-git-send-email-t-kristo@ti.com \
    --to=t-kristo@ti.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=nm@ti.com \
    --cc=paul@pwsan.com \
    --cc=rnayak@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).