Devicetree
 help / color / mirror / Atom feed
From: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
	myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org
Cc: linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	kishon-l0cyMroinI0@public.gmane.org,
	Laxman Dewangan
	<ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org
Subject: [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform
Date: Wed, 10 Jul 2013 14:59:06 +0530	[thread overview]
Message-ID: <1373448546-7531-1-git-send-email-ldewangan@nvidia.com> (raw)

Based on system design, platform needs to detect the VBUS or ID or
both. Provide option to select this through platform data to
disable part of cable detection through palmas-usb.

Signed-off-by: Laxman Dewangan <ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Acked-by: Graeme Gregory <gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org>
---
No changes from V1.

Change from V2:
- Remove the changes on platform strcuture.
- Move the palma_usb allocation before DT parsing.
- remove the mem allocation of pdata as it is not used.

Note:
- This was the 4th patch of the series. ALready 3 pacthes are applied and
  hence sending this 4th patch only. This has the fix suggested by Chanwoo.

 .../devicetree/bindings/extcon/extcon-palmas.txt   |    2 +
 drivers/extcon/extcon-palmas.c                     |   87 ++++++++++++--------
 include/linux/mfd/palmas.h                         |    3 +
 3 files changed, 58 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
index f110e75..7dab6a8 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt
@@ -6,6 +6,8 @@ Required Properties:
 
 Optional Properties:
  - ti,wakeup : To enable the wakeup comparator in probe
+ - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-vbus-detection: Perform VBUS detection.
 
 palmas-usb {
        compatible = "ti,twl6035-usb", "ti,palmas-usb";
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 5440f7c..5c218d2 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -122,11 +122,14 @@ static void palmas_enable_irq(struct palmas_usb *palmas_usb)
 		PALMAS_USB_ID_INT_EN_HI_SET_ID_GND |
 		PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT);
 
-	palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb);
+	if (palmas_usb->enable_vbus_detection)
+		palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb);
 
 	/* cold plug for host mode needs this delay */
-	msleep(30);
-	palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb);
+	if (palmas_usb->enable_id_detection) {
+		msleep(30);
+		palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb);
+	}
 }
 
 static int palmas_usb_probe(struct platform_device *pdev)
@@ -137,20 +140,26 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	struct palmas_usb *palmas_usb;
 	int status;
 
-	if (node && !pdata) {
-		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-
-		if (!pdata)
-			return -ENOMEM;
+	palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL);
+	if (!palmas_usb)
+		return -ENOMEM;
 
-		pdata->wakeup = of_property_read_bool(node, "ti,wakeup");
+	if (node && !pdata) {
+		palmas_usb->wakeup = of_property_read_bool(node, "ti,wakeup");
+		palmas_usb->enable_id_detection = of_property_read_bool(node,
+						"ti,enable-id-detection");
+		palmas_usb->enable_vbus_detection = of_property_read_bool(node,
+						"ti,enable-vbus-detection");
+	} else if (pdata) {
+		palmas_usb->wakeup = pdata->wakeup;
+		palmas_usb->enable_id_detection = true;
+		palmas_usb->enable_vbus_detection = true;
 	} else if (!pdata) {
-		return -EINVAL;
+		palmas_usb->wakeup = true;
+		palmas_usb->enable_id_detection = true;
+		palmas_usb->enable_vbus_detection = true;
 	}
 
-	palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL);
-	if (!palmas_usb)
-		return -ENOMEM;
 
 	palmas->usb = palmas_usb;
 	palmas_usb->palmas = palmas;
@@ -166,7 +175,7 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
 						PALMAS_VBUS_IRQ);
 
-	palmas_usb_wakeup(palmas, pdata->wakeup);
+	palmas_usb_wakeup(palmas, palmas_usb->wakeup);
 
 	platform_set_drvdata(pdev, palmas_usb);
 
@@ -180,26 +189,32 @@ static int palmas_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
-	status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->id_irq,
-			NULL, palmas_id_irq_handler,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT | IRQF_EARLY_RESUME,
-			"palmas_usb_id", palmas_usb);
-	if (status < 0) {
-		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+	if (palmas_usb->enable_id_detection) {
+		status = devm_request_threaded_irq(palmas_usb->dev,
+				palmas_usb->id_irq,
+				NULL, palmas_id_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas_usb_id", palmas_usb);
+		if (status < 0) {
+			dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 					palmas_usb->id_irq, status);
-		goto fail_extcon;
+			goto fail_extcon;
+		}
 	}
 
-	status = devm_request_threaded_irq(palmas_usb->dev,
-			palmas_usb->vbus_irq, NULL, palmas_vbus_irq_handler,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
-			IRQF_ONESHOT | IRQF_EARLY_RESUME,
-			"palmas_usb_vbus", palmas_usb);
-	if (status < 0) {
-		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+	if (palmas_usb->enable_vbus_detection) {
+		status = devm_request_threaded_irq(palmas_usb->dev,
+				palmas_usb->vbus_irq, NULL,
+				palmas_vbus_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas_usb_vbus", palmas_usb);
+		if (status < 0) {
+			dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 					palmas_usb->vbus_irq, status);
-		goto fail_extcon;
+			goto fail_extcon;
+		}
 	}
 
 	palmas_enable_irq(palmas_usb);
@@ -227,8 +242,10 @@ static int palmas_usb_suspend(struct device *dev)
 	struct palmas_usb *palmas_usb = dev_get_drvdata(dev);
 
 	if (device_may_wakeup(dev)) {
-		enable_irq_wake(palmas_usb->vbus_irq);
-		enable_irq_wake(palmas_usb->id_irq);
+		if (palmas_usb->enable_vbus_detection)
+			enable_irq_wake(palmas_usb->vbus_irq);
+		if (palmas_usb->enable_id_detection)
+			enable_irq_wake(palmas_usb->id_irq);
 	}
 	return 0;
 }
@@ -238,8 +255,10 @@ static int palmas_usb_resume(struct device *dev)
 	struct palmas_usb *palmas_usb = dev_get_drvdata(dev);
 
 	if (device_may_wakeup(dev)) {
-		disable_irq_wake(palmas_usb->vbus_irq);
-		disable_irq_wake(palmas_usb->id_irq);
+		if (palmas_usb->enable_vbus_detection)
+			disable_irq_wake(palmas_usb->vbus_irq);
+		if (palmas_usb->enable_id_detection)
+			disable_irq_wake(palmas_usb->id_irq);
 	}
 	return 0;
 };
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 03c22ca..cfc678c 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -377,6 +377,9 @@ struct palmas_usb {
 	int vbus_irq;
 
 	enum palmas_usb_state linkstat;
+	int wakeup;
+	bool enable_vbus_detection;
+	bool enable_id_detection;
 };
 
 #define comparator_to_palmas(x) container_of((x), struct palmas_usb, comparator)
-- 
1.7.1.1

             reply	other threads:[~2013-07-10  9:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-10  9:29 Laxman Dewangan [this message]
2013-07-11  2:42 ` [PATCH V3] extcon: palmas: Option to disable ID/VBUS detection based on platform Chanwoo Choi
2013-07-11  3:08   ` Laxman Dewangan
2013-07-11  4:30     ` Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373448546-7531-1-git-send-email-ldewangan@nvidia.com \
    --to=ldewangan-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
    --cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
    --cc=gg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org \
    --cc=kishon-l0cyMroinI0@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox