From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: [PATCH V2 1/2] regulator: palmas-pmic: doc: fix typo for sleep-mode Date: Tue, 16 Jul 2013 11:41:09 -0500 Message-ID: <1373992870-20725-2-git-send-email-nm@ti.com> References: <20130716161939.GR22506@sirena.org.uk> <1373992870-20725-1-git-send-email-nm@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1373992870-20725-1-git-send-email-nm@ti.com> Sender: linux-doc-owner@vger.kernel.org To: Graeme Gregory , Mark Brown Cc: J Keerthy , Laxman Dewangan , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nishanth Menon List-Id: devicetree@vger.kernel.org commit 3c870e3f9d9d98f1ab98614b3b1fd5c79287d361 (regulator: palmas: Change the DT node property names to follow the convention) Missed updating mode-sleep from sleep-mode. Fix the same. Documentation example seems proper for this property. Signed-off-by: Nishanth Menon --- .../devicetree/bindings/regulator/palmas-pmic.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index d5a3086..04d67f0 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -31,7 +31,7 @@ Optional nodes: Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) ti,roof-floor - control voltage selection by pin(boolean) - ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto, + ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us ti,smps-range - OTP has the wrong range set for the hardware so override -- 1.7.9.5