From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: [PATCH V2 2/2] regulator: palmas-pmic: doc: remove ti,tstep Date: Tue, 16 Jul 2013 11:41:10 -0500 Message-ID: <1373992870-20725-3-git-send-email-nm@ti.com> References: <20130716161939.GR22506@sirena.org.uk> <1373992870-20725-1-git-send-email-nm@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1373992870-20725-1-git-send-email-nm-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: Graeme Gregory , Mark Brown Cc: Nishanth Menon , linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, J Keerthy , devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Laxman Dewangan , linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org commit 28d1e8cd671a53d6b4f967abbbc2a55f7bd333f6 (regulator: palma: add ramp delay support through regulator constraints) Removed the regulator's ti,step option from driver without updating the documentation. So, remove from documentation and example as well. Signed-off-by: Nishanth Menon --- .../devicetree/bindings/regulator/palmas-pmic.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 04d67f0..30b0581 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -33,7 +33,6 @@ Optional nodes: ti,roof-floor - control voltage selection by pin(boolean) ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm - ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us ti,smps-range - OTP has the wrong range set for the hardware so override 0 - low range, 1 - high range. @@ -59,7 +58,6 @@ pmic { ti,warm-reset; ti,roof-floor; ti,mode-sleep = <0>; - ti,tstep = <0>; ti,smps-range = <1>; }; -- 1.7.9.5