From: Nishanth Menon <nm@ti.com>
To: "Benoît Cousson" <benoit.cousson@linaro.org>,
"Tony Lindgren" <tony@atomide.com>
Cc: linux-omap@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, J Keerthy <j-keerthy@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 1/9] ARM: dts: omap5-uevm: document regulator signals used on the actual board
Date: Wed, 17 Jul 2013 11:45:30 -0500 [thread overview]
Message-ID: <1374079538-19548-2-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1374079538-19548-1-git-send-email-nm@ti.com>
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.
However, currently we use the Palmas regulator names which is used for
different purposes on uEVM. Document the same based on 750-2628-XXX
boards - which is meant to be supported by this dts.
Reported-by: Marc Jüttner <m-juettner@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..b430b8f 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -282,6 +282,7 @@
regulators {
smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
regulator-name = "smps123";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
};
smps45_reg: smps45 {
+ /* VDD_OPP_MM */
regulator-name = "smps45";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
};
smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
};
smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
};
smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
regulator-name = "smps8";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -322,6 +327,7 @@
};
smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
@@ -331,6 +337,7 @@
};
smps10_reg: smps10 {
+ /* VBUS_5V_OTG */
regulator-name = "smps10";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -339,6 +346,7 @@
};
ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -347,6 +355,7 @@
};
ldo2_reg: ldo2 {
+ /* VCC_2V8_DISP: Does not go anywhere */
regulator-name = "ldo2";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
@@ -355,6 +364,7 @@
};
ldo3_reg: ldo3 {
+ /* VDDAPHY_MDM: vdda_lli */
regulator-name = "ldo3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
@@ -363,6 +373,7 @@
};
ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
@@ -371,6 +382,7 @@
};
ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -379,6 +391,7 @@
};
ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
regulator-name = "ldo6";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -387,6 +400,7 @@
};
ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
regulator-name = "ldo7";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -395,6 +409,7 @@
};
ldo8_reg: ldo8 {
+ /* VDD_3v0: Does not go anywhere */
regulator-name = "ldo8";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@@ -403,6 +418,7 @@
};
ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
regulator-name = "ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -411,6 +427,7 @@
};
ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -419,6 +436,7 @@
};
ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3250000>;
regulator-max-microvolt = <3250000>;
--
1.7.9.5
next prev parent reply other threads:[~2013-07-17 16:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 16:45 [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon [this message]
2013-07-17 16:45 ` [PATCH 3/9] ARM: dts: omap5-uevm: update and disable unused regulators LDO[28] Nishanth Menon
2013-07-17 16:45 ` [PATCH 4/9] ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings Nishanth Menon
[not found] ` <1374079538-19548-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2013-07-17 16:45 ` [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings Nishanth Menon
2013-07-17 16:45 ` [PATCH 5/9] ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings Nishanth Menon
2013-07-17 16:45 ` [PATCH 6/9] ARM: dts: omap5-uevm: update LDO4 " Nishanth Menon
2013-07-17 16:45 ` [PATCH 8/9] ARM: dts: omap5-uevm: update LDO7 voltage to 2V " Nishanth Menon
2013-07-17 16:45 ` [PATCH 7/9] ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V Nishanth Menon
2013-07-17 16:45 ` [PATCH 9/9] ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3 Nishanth Menon
2013-07-29 9:57 ` [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration Keerthy
2013-07-29 13:17 ` Nishanth Menon
2013-07-29 13:39 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374079538-19548-2-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=benoit.cousson@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).