From: Laxman Dewangan <ldewangan@nvidia.com>
To: akpm@linux-foundation.org
Cc: grant.likely@linaro.org, rob.herring@calxeda.com,
rob@landley.net, devicetree-discuss@lists.ozlabs.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
rtc-linux@googlegroups.com, gg@slimlogic.co.uk, kishon@ti.com,
swarren@nvidia.com, Laxman Dewangan <ldewangan@nvidia.com>
Subject: [PATCH] drivers/rtc/rtc-palmas.c: support for backup battery charging
Date: Thu, 25 Jul 2013 17:59:03 +0530 [thread overview]
Message-ID: <1374755343-32573-1-git-send-email-ldewangan@nvidia.com> (raw)
Palmas series device like TPS65913, TPS80036 supports the backup battery
for powering the RTC when no other energy source is available.
The backup battery is optional, connected to the VBACKUP pin, and can be
nonrechargeable or rechargeable. The rechargeable battery can be charged
from the system supply using the backup battery charger.
Add support for enabling charging of this backup battery. Also add the DT
binding document and the new properties to have this support.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
.../devicetree/bindings/rtc/rtc-palmas.txt | 28 ++++++++++++++
drivers/rtc/rtc-palmas.c | 39 ++++++++++++++++++++
2 files changed, 67 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-palmas.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
new file mode 100644
index 0000000..e4b6910
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -0,0 +1,28 @@
+Palmas RTC controller bindings
+
+Required properties:
+- compatible:
+ - "ti,palams-rtc" for palma series of the RTC controller
+- interrupt-parent: Parent interrupt device, must be handle of palams node.
+- interrupts: Interrupt number of RTC submodule on device.
+
+Optional properties:
+- ti,back-bat-chg-enable: The palmas series device like TPS65913 or TPS80036
+ supports the battery backup for powering the RTC when main battery is
+ removed or in very low power state. This flag will enable the backup
+ battery charging.
+- ti,back-bat-chg-current: Configure charging current. Device supports the
+ charging current as < 100mA or >100mA.
+
+Example:
+ palmas: tps65913@58 {
+ :::::::::::
+ palmas_rtc: rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ ti,back-bat-chg-enable;
+ ti,back-bat-chg-current = <100>;
+ };
+ :::::::::::
+ };
diff --git a/drivers/rtc/rtc-palmas.c b/drivers/rtc/rtc-palmas.c
index a1fecc8..1a7c44a 100644
--- a/drivers/rtc/rtc-palmas.c
+++ b/drivers/rtc/rtc-palmas.c
@@ -238,6 +238,19 @@ static int palmas_rtc_probe(struct platform_device *pdev)
struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
struct palmas_rtc *palmas_rtc = NULL;
int ret;
+ bool enable_bb_charging = false;
+ u32 bb_charging_current = 100;
+
+ if (pdev->dev.of_node) {
+ u32 pval;
+
+ enable_bb_charging = of_property_read_bool(pdev->dev.of_node,
+ "ti,back-bat-chg-enable");
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "ti,back-bat-chg-current", &pval);
+ if (!ret)
+ bb_charging_current = pval;
+ }
palmas_rtc = devm_kzalloc(&pdev->dev, sizeof(struct palmas_rtc),
GFP_KERNEL);
@@ -254,6 +267,32 @@ static int palmas_rtc_probe(struct platform_device *pdev)
palmas_rtc->dev = &pdev->dev;
platform_set_drvdata(pdev, palmas_rtc);
+ if (enable_bb_charging) {
+ unsigned reg = 0;
+
+ if (bb_charging_current < 100)
+ reg |= PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG;
+
+ ret = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+ PALMAS_BACKUP_BATTERY_CTRL,
+ PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG, reg);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "BACKUP_BATTERY_CTRL update failed, %d\n", ret);
+ return ret;
+ }
+
+ ret = palmas_update_bits(palmas, PALMAS_PMU_CONTROL_BASE,
+ PALMAS_BACKUP_BATTERY_CTRL,
+ PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN,
+ PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "BACKUP_BATTERY_CTRL update failed, %d\n", ret);
+ return ret;
+ }
+ }
+
/* Start RTC */
ret = palmas_update_bits(palmas, PALMAS_RTC_BASE, PALMAS_RTC_CTRL_REG,
PALMAS_RTC_CTRL_REG_STOP_RTC,
--
1.7.1.1
next reply other threads:[~2013-07-25 12:29 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-25 12:29 Laxman Dewangan [this message]
2013-07-26 15:40 ` [PATCH] drivers/rtc/rtc-palmas.c: support for backup battery charging Stephen Warren
2013-07-26 15:52 ` Mark Rutland
2013-07-26 16:35 ` Mark Brown
2013-07-26 16:42 ` Stephen Warren
2013-07-27 7:32 ` Laxman Dewangan
2013-07-26 20:45 ` Tomasz Figa
2013-07-27 7:38 ` Laxman Dewangan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374755343-32573-1-git-send-email-ldewangan@nvidia.com \
--to=ldewangan@nvidia.com \
--cc=akpm@linux-foundation.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gg@slimlogic.co.uk \
--cc=grant.likely@linaro.org \
--cc=kishon@ti.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=rtc-linux@googlegroups.com \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).