[PATCH 0/3] usb: phy-samsung-usb: Simplify and cleanup

[PATCH 0/3] usb: phy-samsung-usb: Simplify and cleanup

[Julius Werner]

This patch series cleans up and simplifies some of the Samsung USB PHY
driver code. It changes the PMU register handling to carry the register
address directly in the device tree and avoid a lot of special-cased
address arithmatic in the code. Then it removes the USB_PHY_TYPE
HOST/DEVICE distinction which was only needed for those removed parts.

Julius Werner (3):
  usb: phy-samsung-usb: Simplify PMU register handling
  usb: phy-samsung-usb: trivial: rename pmuregs variable
  usb: phy-samsung-usb: Remove USB_PHY_TYPE from Samsung PHY driver

 arch/arm/boot/dts/exynos5250.dtsi  |  4 +--
 drivers/usb/phy/phy-samsung-usb.c  | 51 +++++++++-----------------------------
 drivers/usb/phy/phy-samsung-usb.h  | 34 ++++++-------------------
 drivers/usb/phy/phy-samsung-usb2.c | 34 +++++++------------------
 drivers/usb/phy/phy-samsung-usb3.c | 13 +++-------
 5 files changed, 34 insertions(+), 102 deletions(-)

-- 
1.7.12.4

[PATCH 1/3] usb: phy-samsung-usb: Simplify PMU register handling

[Julius Werner]

This patch simplifies the way the phy-samsung-usb code finds the correct
power management register to enable PHY clock gating. Previously, the
code would calculate the register address from a device tree supplied
base address and add an offset based on the PHY type.

Since every PHY has its own device tree entry and needs only one
register, we can just encode the address itself in the device tree and
remove the diffentiation in the code. The bitmask needed to specify the
bit within that register stays in place, allowing support for platforms
like s3c64xx that use different bits within the same register.

Signed-off-by: Julius Werner <jwerner@chromium.org>
---
 arch/arm/boot/dts/exynos5250.dtsi  |  4 ++--
 drivers/usb/phy/phy-samsung-usb.c  | 18 ++++--------------
 drivers/usb/phy/phy-samsung-usb.h  | 23 +++++------------------
 drivers/usb/phy/phy-samsung-usb2.c | 11 ++++-------
 drivers/usb/phy/phy-samsung-usb3.c |  2 +-
 5 files changed, 16 insertions(+), 42 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..5a754d7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -473,7 +473,7 @@
 		ranges;
 
 		usbphy-sys {
-			reg = <0x10040704 0x8>;
+			reg = <0x10040704 0x4>;
 		};
 	};
 
@@ -505,7 +505,7 @@
 		ranges;
 
 		usbphy-sys {
-			reg = <0x10040704 0x8>,
+			reg = <0x10040708 0x4>,
 			      <0x10050230 0x4>;
 		};
 	};
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index ac025ca..51cad19 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -75,31 +75,21 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
  */
 void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
 {
-	void __iomem *reg = NULL;
 	u32 reg_val;
-	u32 en_mask = 0;
 
 	if (!sphy->pmuregs) {
 		dev_warn(sphy->dev, "Can't set pmu isolation\n");
 		return;
 	}
 
-	if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
-		reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
-		en_mask = sphy->drv_data->devphy_en_mask;
-	} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
-		reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
-		en_mask = sphy->drv_data->hostphy_en_mask;
-	}
-
-	reg_val = readl(reg);
+	reg_val = readl(sphy->pmuregs);
 
 	if (on)
-		reg_val &= ~en_mask;
+		reg_val &= ~sphy->drv_data->phy_en_mask;
 	else
-		reg_val |= en_mask;
+		reg_val |= sphy->drv_data->phy_en_mask;
 
-	writel(reg_val, reg);
+	writel(reg_val, sphy->pmuregs);
 
 	if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
 		writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index 68771bf..a817af5 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -243,7 +243,6 @@
 #define KHZ (1000)
 #endif
 
-#define EXYNOS_USBHOST_PHY_CTRL_OFFSET		(0x4)
 #define S3C64XX_USBPHY_ENABLE			(0x1 << 16)
 #define EXYNOS_USBPHY_ENABLE			(0x1 << 0)
 #define EXYNOS_USB20PHY_CFG_HOST_LINK		(0x1 << 0)
@@ -260,27 +259,15 @@ struct samsung_usbphy;
 /*
  * struct samsung_usbphy_drvdata - driver data for various SoC variants
  * @cpu_type: machine identifier
- * @devphy_en_mask: device phy enable mask for PHY CONTROL register
- * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
- * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
- *		       mapped address of system controller.
- * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
- *		       mapped address of system controller.
+ * @phy_en_mask: phy enable mask for PHY CONTROL register
  *
- *	Here we have a separate mask for device type phy.
- *	Having different masks for host and device type phy helps
- *	in setting independent masks in case of SoCs like S5PV210,
- *	in which PHY0 and PHY1 enable bits belong to same register
- *	placed at position 0 and 1 respectively.
- *	Although for newer SoCs like exynos these bits belong to
- *	different registers altogether placed at position 0.
+ *	Here we have a mask for the phy control bit. This is required for SoCs
+ *	like S5PV210, in which different PHYs use different bits in the same
+ *	register.
  */
 struct samsung_usbphy_drvdata {
 	int cpu_type;
-	int devphy_en_mask;
-	int hostphy_en_mask;
-	u32 devphy_reg_offset;
-	u32 hostphy_reg_offset;
+	int phy_en_mask;
 	int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
 	void (*set_isolation)(struct samsung_usbphy *, bool);
 	void (*phy_enable)(struct samsung_usbphy *);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 758b86d..adbaa8c 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -445,7 +445,7 @@ static int samsung_usb2phy_remove(struct platform_device *pdev)
 
 static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
 	.cpu_type		= TYPE_S3C64XX,
-	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
+	.phy_en_mask		= S3C64XX_USBPHY_ENABLE,
 	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
 	.set_isolation		= NULL, /* TODO */
 	.phy_enable		= samsung_usb2phy_enable,
@@ -454,8 +454,7 @@ static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
 
 static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
 	.cpu_type		= TYPE_EXYNOS4210,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
+	.phy_en_mask		= EXYNOS_USBPHY_ENABLE,
 	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
 	.set_isolation		= samsung_usbphy_set_isolation_4210,
 	.phy_enable		= samsung_usb2phy_enable,
@@ -464,8 +463,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
 
 static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
 	.cpu_type		= TYPE_EXYNOS4X12,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
+	.phy_en_mask		= EXYNOS_USBPHY_ENABLE,
 	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
 	.set_isolation		= samsung_usbphy_set_isolation_4210,
 	.phy_enable		= samsung_usb2phy_enable,
@@ -474,8 +472,7 @@ static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
 
 static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
 	.cpu_type		= TYPE_EXYNOS5250,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
+	.phy_en_mask		= EXYNOS_USBPHY_ENABLE,
 	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
 	.set_isolation		= samsung_usbphy_set_isolation_4210,
 	.phy_enable		= samsung_exynos5_usb2phy_enable,
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 300e0cf..3ad9579 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -302,7 +302,7 @@ static int samsung_usb3phy_remove(struct platform_device *pdev)
 
 static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
 	.cpu_type		= TYPE_EXYNOS5250,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
+	.phy_en_mask		= EXYNOS_USBPHY_ENABLE,
 	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
 	.set_isolation		= samsung_usbphy_set_isolation_4210,
 	.phy_enable		= samsung_exynos5_usb3phy_enable,
-- 
1.7.12.4

Re: [PATCH 1/3] usb: phy-samsung-usb: Simplify PMU register handling

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 900 bytes --]

Hi,

On Thu, Aug 01, 2013 at 05:52:04PM -0700, Julius Werner wrote:
> This patch simplifies the way the phy-samsung-usb code finds the correct
> power management register to enable PHY clock gating. Previously, the
> code would calculate the register address from a device tree supplied
> base address and add an offset based on the PHY type.
> 
> Since every PHY has its own device tree entry and needs only one
> register, we can just encode the address itself in the device tree and
> remove the diffentiation in the code. The bitmask needed to specify the
> bit within that register stays in place, allowing support for platforms
> like s3c64xx that use different bits within the same register.
> 
> Signed-off-by: Julius Werner <jwerner@chromium.org>

I need an Acked-by for the dtsi part. Ideally from Exynos 5 maintainer
and at least one of the DT maintainers.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 1/3] usb: phy-samsung-usb: Simplify PMU register handling

[Julius Werner]

On Fri, Aug 2, 2013 at 12:51 AM, Felipe Balbi <balbi@ti.com> wrote:
> Hi,
>
> I need an Acked-by for the dtsi part. Ideally from Exynos 5 maintainer
> and at least one of the DT maintainers.
>
> --
> balbi

Okay, I think I forgot to update the DT bindings documentation
anyway... so I will resubmit this and address some more DT people
directly to get that ACK.

[PATCH 2/3] usb: phy-samsung-usb: trivial: rename pmuregs variable

[Julius Werner]

Now that the sphy->pmuregs variable always points to only a single
register, let's rename it to make that more clear.

Signed-off-by: Julius Werner <jwerner@chromium.org>
---
 drivers/usb/phy/phy-samsung-usb.c  | 14 +++++++-------
 drivers/usb/phy/phy-samsung-usb.h  |  4 ++--
 drivers/usb/phy/phy-samsung-usb2.c |  4 ++--
 drivers/usb/phy/phy-samsung-usb3.c |  4 ++--
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index 51cad19..fa382c9 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -42,9 +42,9 @@ int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
 		return -ENODEV;
 	}
 
-	sphy->pmuregs = of_iomap(usbphy_sys, 0);
+	sphy->pmureg = of_iomap(usbphy_sys, 0);
 
-	if (sphy->pmuregs == NULL) {
+	if (sphy->pmureg == NULL) {
 		dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
 		goto err0;
 	}
@@ -77,23 +77,23 @@ void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
 {
 	u32 reg_val;
 
-	if (!sphy->pmuregs) {
+	if (!sphy->pmureg) {
 		dev_warn(sphy->dev, "Can't set pmu isolation\n");
 		return;
 	}
 
-	reg_val = readl(sphy->pmuregs);
+	reg_val = readl(sphy->pmureg);
 
 	if (on)
 		reg_val &= ~sphy->drv_data->phy_en_mask;
 	else
 		reg_val |= sphy->drv_data->phy_en_mask;
 
-	writel(reg_val, sphy->pmuregs);
+	writel(reg_val, sphy->pmureg);
 
 	if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
-		writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
-		writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
+		writel(reg_val, sphy->pmureg + EXYNOS4X12_PHY_HSIC_CTRL0);
+		writel(reg_val, sphy->pmureg + EXYNOS4X12_PHY_HSIC_CTRL1);
 	}
 }
 EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index a817af5..f2e9c4a 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -281,7 +281,7 @@ struct samsung_usbphy_drvdata {
  * @dev: The parent device supplied to the probe function
  * @clk: usb phy clock
  * @regs: usb phy controller registers memory base
- * @pmuregs: USB device PHY_CONTROL register memory base
+ * @pmureg: USB device PHY_CONTROL register address
  * @sysreg: USB2.0 PHY_CFG register memory base
  * @ref_clk_freq: reference clock frequency selection
  * @drv_data: driver data available for different SoCs
@@ -296,7 +296,7 @@ struct samsung_usbphy {
 	struct device	*dev;
 	struct clk	*clk;
 	void __iomem	*regs;
-	void __iomem	*pmuregs;
+	void __iomem	*pmureg;
 	void __iomem	*sysreg;
 	int		ref_clk_freq;
 	const struct samsung_usbphy_drvdata *drv_data;
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index adbaa8c..c2c83d4 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -435,8 +435,8 @@ static int samsung_usb2phy_remove(struct platform_device *pdev)
 
 	usb_remove_phy(&sphy->phy);
 
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
+	if (sphy->pmureg)
+		iounmap(sphy->pmureg);
 	if (sphy->sysreg)
 		iounmap(sphy->sysreg);
 
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 3ad9579..6259a35 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -292,8 +292,8 @@ static int samsung_usb3phy_remove(struct platform_device *pdev)
 
 	usb_remove_phy(&sphy->phy);
 
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
+	if (sphy->pmureg)
+		iounmap(sphy->pmureg);
 	if (sphy->sysreg)
 		iounmap(sphy->sysreg);
 
-- 
1.7.12.4

[PATCH 3/3] usb: phy-samsung-usb: Remove USB_PHY_TYPE from Samsung PHY driver

[Julius Werner]

Since the PMU register handling was simplified, the last reason to
differentiate between HOST and DEVICE PHYs in the Samsung USB PHY driver
has disappeared. This patch removes that variable and reworks
surrounding code to live without it to make the driver a little smaller
and cleaner.

Signed-off-by: Julius Werner <jwerner@chromium.org>
---
 drivers/usb/phy/phy-samsung-usb.c  | 23 +++--------------------
 drivers/usb/phy/phy-samsung-usb.h  |  7 +------
 drivers/usb/phy/phy-samsung-usb2.c | 19 +++----------------
 drivers/usb/phy/phy-samsung-usb3.c |  7 -------
 4 files changed, 7 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
index fa382c9..32c5264 100644
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ b/drivers/usb/phy/phy-samsung-usb.c
@@ -27,7 +27,6 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/usb/samsung_usb_phy.h>
 
 #include "phy-samsung-usb.h"
 
@@ -101,7 +100,7 @@ EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
 /*
  * Configure the mode of working of usb-phy here: HOST/DEVICE.
  */
-void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
+void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy, bool device_mode)
 {
 	u32 reg;
 
@@ -112,31 +111,15 @@ void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
 
 	reg = readl(sphy->sysreg);
 
-	if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
+	if (device_mode)
 		reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
-	else if (sphy->phy_type == USB_PHY_TYPE_HOST)
+	else
 		reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
 
 	writel(reg, sphy->sysreg);
 }
 EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel);
 
-/*
- * PHYs are different for USB Device and USB Host.
- * This make sure that correct PHY type is selected before
- * any operation on PHY.
- */
-int samsung_usbphy_set_type(struct usb_phy *phy,
-				enum samsung_usb_phy_type phy_type)
-{
-	struct samsung_usbphy *sphy = phy_to_sphy(phy);
-
-	sphy->phy_type = phy_type;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
-
 int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
 							unsigned long rate)
 {
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
index f2e9c4a..0c0d7d1 100644
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ b/drivers/usb/phy/phy-samsung-usb.h
@@ -285,8 +285,6 @@ struct samsung_usbphy_drvdata {
  * @sysreg: USB2.0 PHY_CFG register memory base
  * @ref_clk_freq: reference clock frequency selection
  * @drv_data: driver data available for different SoCs
- * @phy_type: Samsung SoCs specific phy types:	#HOST
- *						#DEVICE
  * @phy_usage: usage count for phy
  * @lock: lock for phy operations
  */
@@ -300,7 +298,6 @@ struct samsung_usbphy {
 	void __iomem	*sysreg;
 	int		ref_clk_freq;
 	const struct samsung_usbphy_drvdata *drv_data;
-	enum samsung_usb_phy_type phy_type;
 	atomic_t	phy_usage;
 	spinlock_t	lock;
 };
@@ -326,9 +323,7 @@ static inline const struct samsung_usbphy_drvdata
 extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
 extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
 								bool on);
-extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
-extern int samsung_usbphy_set_type(struct usb_phy *phy,
-					enum samsung_usb_phy_type phy_type);
+extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy, bool dev_mode);
 extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
 extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
 							unsigned long rate);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index c2c83d4..eb215a1 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -27,7 +27,6 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/usb/otg.h>
-#include <linux/usb/samsung_usb_phy.h>
 #include <linux/platform_data/samsung-usbphy.h>
 
 #include "phy-samsung-usb.h"
@@ -283,13 +282,13 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
 
 	spin_lock_irqsave(&sphy->lock, flags);
 
+	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
 	if (host) {
-		/* setting default phy-type for USB 2.0 */
 		if (!strstr(dev_name(host->controller), "ehci") ||
 				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
+			samsung_usbphy_cfg_sel(sphy, false);
 	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
+		samsung_usbphy_cfg_sel(sphy, true);
 	}
 
 	/* Disable phy isolation */
@@ -298,9 +297,6 @@ static int samsung_usb2phy_init(struct usb_phy *phy)
 	else if (sphy->drv_data->set_isolation)
 		sphy->drv_data->set_isolation(sphy, false);
 
-	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
-	samsung_usbphy_cfg_sel(sphy);
-
 	/* Initialize usb phy registers */
 	sphy->drv_data->phy_enable(sphy);
 
@@ -332,15 +328,6 @@ static void samsung_usb2phy_shutdown(struct usb_phy *phy)
 
 	spin_lock_irqsave(&sphy->lock, flags);
 
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
 	/* De-initialize usb phy registers */
 	sphy->drv_data->phy_disable(sphy);
 
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
index 6259a35..ac05d91 100644
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ b/drivers/usb/phy/phy-samsung-usb3.c
@@ -24,7 +24,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/usb/samsung_usb_phy.h>
 #include <linux/platform_data/samsung-usbphy.h>
 
 #include "phy-samsung-usb.h"
@@ -178,9 +177,6 @@ static int samsung_usb3phy_init(struct usb_phy *phy)
 
 	spin_lock_irqsave(&sphy->lock, flags);
 
-	/* setting default phy-type for USB 3.0 */
-	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-
 	/* Disable phy isolation */
 	if (sphy->drv_data->set_isolation)
 		sphy->drv_data->set_isolation(sphy, false);
@@ -213,9 +209,6 @@ static void samsung_usb3phy_shutdown(struct usb_phy *phy)
 
 	spin_lock_irqsave(&sphy->lock, flags);
 
-	/* setting default phy-type for USB 3.0 */
-	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-
 	/* De-initialize usb phy registers */
 	sphy->drv_data->phy_disable(sphy);
 
-- 
1.7.12.4