From mboxrd@z Thu Jan  1 00:00:00 1970
From: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Subject: Re: [PATCH v2] arm64: dts: add all hi6220 uart nodes
Date: Tue, 06 Oct 2015 16:36:03 +0200
Message-ID: <13756810.CXgbUlyXY5@wuerfel>
References: <1443662388-25686-1-git-send-email-tyler.baker@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7Bit
Return-path: <devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
In-Reply-To: <1443662388-25686-1-git-send-email-tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Tyler Baker <tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Wei Xu <xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Ricardo Salveti <ricardo.salveti-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Bintian Wang <bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>, Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>, Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>, Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Kevin Hilman <khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>, Amit Kucheria <amit.kucheria-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
List-Id: devicetree@vger.kernel.org

On Wednesday 30 September 2015 18:19:48 Tyler Baker wrote:
> This patch adds all UART nodes for the Hi6220 SoC. Recently a board[1] has
> been developed to standardize UART access across all the 96boards consumer
> edition boards. To use this hardware on HiKey we must configure and enable
> UART3. However, to ensure backward compatibility we must keep UART0 enabled
> as well.
> 
> I have removed the hard coded clock index values in favor of using the ones
> already defined in include/dt-bindings/clock/hi6220-clock.h.
> 
> Since UART0 needs to be soldered, it has been suggested to use the UART3 as
> the default console.
> 
> This patch was boot tested on top of next-20150930, with both UART
> configurations.
> 
> [1] http://www.seeedstudio.com/depot/96Boards-UART-p-2525.html?ref=newInBazaar
> 
> Signed-off-by: Tyler Baker <tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> 

Applied to next/dt, thanks!

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html