devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
To: Sekhar Nori <nsekhar@ti.com>
Cc: DLOS <davinci-linux-open-source@linux.davincidsp.com>,
	LKML <linux-kernel@vger.kernel.org>,
	devicetree-discuss@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Subject: [PATCH v4 4/5] ARM: davinci: da850: add DT node for eth0.
Date: Thu, 15 Aug 2013 11:31:36 +0530	[thread overview]
Message-ID: <1376546497-26931-5-git-send-email-prabhakar.csengg@gmail.com> (raw)
In-Reply-To: <1376546497-26931-1-git-send-email-prabhakar.csengg@gmail.com>

From: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>

Add eth0 device tree node information and pinmux for mii to da850 by
providing interrupt details and local mac address of eth0.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 Changes for v2: None
 
 Changes for v3:
  a> Split the pinmux for mdio and mii.
  
 Changes for v4: none

 arch/arm/boot/dts/da850-evm.dts |    5 +++++
 arch/arm/boot/dts/da850.dtsi    |   30 ++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1f8cfdd..65bc080 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -96,6 +96,11 @@
 			pinctrl-0 = <&mdio_pins>;
 			bus_freq = <2200000>;
 		};
+		eth0: emac@1e20000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mii_pins>;
+		};
 	};
 	nand_cs3@62000000 {
 		status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index d5138b4..911f647 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -131,6 +131,22 @@
 					0x10 0x00000088 0x000000ff
 				>;
 			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
 
 		};
 		serial0: serial@1c42000 {
@@ -226,6 +242,20 @@
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
 		};
+		eth0: emac@1e20000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+		};
 	};
 	nand_cs3@62000000 {
 		compatible = "ti,davinci-nand";
-- 
1.7.9.5

  parent reply	other threads:[~2013-08-15  6:01 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-15  6:01 [PATCH v4 0/5] ARM: davinci: da850: add ethernet driver DT support Lad, Prabhakar
2013-08-15  6:01 ` [PATCH v4 1/5] ARM: davinci: fix clock lookup for mdio device Lad, Prabhakar
     [not found]   ` <1376546497-26931-2-git-send-email-prabhakar.csengg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-08-16 12:35     ` Sekhar Nori
2013-08-15  6:01 ` [PATCH v4 2/5] ARM: davinci: da850: add DT node " Lad, Prabhakar
2013-08-15  6:01 ` [PATCH v4 3/5] ARM: davinci: da850: add OF_DEV_AUXDATA entry for mdio Lad, Prabhakar
2013-08-15  6:01 ` Lad, Prabhakar [this message]
2013-08-15 19:30   ` [PATCH v4 4/5] ARM: davinci: da850: add DT node for eth0 Sergei Shtylyov
2013-08-16  4:07     ` Prabhakar Lad
2013-08-15  6:01 ` [PATCH v4 5/5] ARM: davinci: da850: add OF_DEV_AUXDATA entry " Lad, Prabhakar
2013-08-15 19:31   ` Sergei Shtylyov
2013-08-16  4:08     ` Prabhakar Lad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1376546497-26931-5-git-send-email-prabhakar.csengg@gmail.com \
    --to=prabhakar.csengg@gmail.com \
    --cc=davinci-linux-open-source@linux.davincidsp.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).