devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: wangyuhang <wangyuhang2014@gmail.com>
To: broonie@kernel.org, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: sourav.poddar@ti.com, pekon@ti.com,
	wangyuhang <wangyuhang2014@gmail.com>
Subject: [PATCH V2 2/2] spi: dual and quad support(device tree)
Date: Tue, 27 Aug 2013 08:50:03 +0800	[thread overview]
Message-ID: <1377564603-4030-2-git-send-email-wangyuhang2014@gmail.com> (raw)
In-Reply-To: <1377564603-4030-1-git-send-email-wangyuhang2014@gmail.com>

Add spi-tmax-nbits and spi-rmax-nbits for spi slave node.
Modify the related dt document(spi-bus.txt)
 spi-tmax-nbits:Max number of bits slave will use for MOSI(writting)
 spi-rmax-nbits:Max number of bits slave will use for MISO(reading)
Support for spi-tx/rmax-nbits in SPI framework has been picked[1].
[1]: http://comments.gmane.org/gmane.linux.kernel.spi.devel/14420
Commit Id:f477b7fb13df2b843997559ff34e87d054ba6538

Signed-off-by: wangyuhang <wangyuhang2014@gmail.com>
---
 Documentation/devicetree/bindings/spi/spi-bus.txt |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index 296015e..211336c 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -55,6 +55,22 @@ contain the following properties.
     		chip select active high
 - spi-3wire       - (optional) Empty property indicating device requires
     		    3-wire mode.
+- spi-tmax-nbits  - (optional) Max number of bits slave will use for
+    		    MOSI(writting)
+- spi-rmax-nbits  - (optional) Max number of bits slave will use for
+    		    MISO(reading)
+
+So if for example the slave has 4 wires for writting and 2 wires for reading,
+and the spi-tx/rx-nbits property should be set as follows:
+
+spi-tmax-nbits = <4>;
+spi-rmax-nbits = <2>;
+
+Now the value that spi-tmax-nbits and spi-rmax-nbits can receive is only
+1(single), 2(dual) and 4(quad). If you don't set spi-tmax-nbits or spi-rmax-nbits,
+spi_device mode will be set in single(1 wire) as default. Another point, if
+property:spi-3wire is set, spi-t/rmax-nbits is forbidden to set to <2 or 4>,
+otherwise, an errro will return.
 
 If a gpio chipselect is used for the SPI slave the gpio number will be passed
 via the cs_gpio
-- 
1.7.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2013-08-27  0:50 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-27  0:50 [PATCH V2 1/2] spi: dual and quad support(device tree) wangyuhang
2013-08-27  0:50 ` wangyuhang [this message]
2013-08-27  4:03   ` [PATCH V2 2/2] " Gupta, Pekon
2013-08-30 21:26   ` Stephen Warren
2013-08-30 22:23     ` Mark Brown
2013-09-01  8:05     ` yuhang wang
2013-08-30 21:30   ` Tomasz Figa
2013-09-01  8:14     ` yuhang wang
2013-08-27  4:09 ` [PATCH V2 1/2] " Gupta, Pekon
2013-08-27  4:58   ` yuhang wang
2013-08-27  7:56     ` yuhang wang
2013-08-27  8:37       ` Gupta, Pekon
2013-08-30 21:20 ` Stephen Warren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377564603-4030-2-git-send-email-wangyuhang2014@gmail.com \
    --to=wangyuhang2014@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=pekon@ti.com \
    --cc=sourav.poddar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).