From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: kgene.kim@samsung.com, sw0312.kim@samsung.com,
inki.dae@samsung.com, tomasz.figa@gmail.com,
s.nawrocki@samsung.com, joshi@samsung.com, r.sh.open@gmail.com,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v7 0/6] ARM: dts: add support for exynos hdmi subsystem
Date: Thu, 29 Aug 2013 19:22:51 +0530 [thread overview]
Message-ID: <1377784377-28426-1-git-send-email-rahul.sharma@samsung.com> (raw)
It adds Device tree nodes and clocks information for HDMI subsystem
for exynos5420 and exynos5250 SoCs. It adds pinctrl node for hdmi
hpd gpio and update binding documents.
This set is based on kukjin's for-next branch at
http://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git.
v7:
1) Minor change in of-documentation.
2) Squash gpio pin-ctrl and ddc patch to one patch.
v6:
1) Update clock numbers as per change in mux and divider clocks.
2) Isolate board changes from SoC patch and add a different patch for ddc.
v5:
1) Merged Clock addition patch to DT nmde addition patch.
2) Add dout_pixel clock for hdmi in place of sclk_pixel.
3) Enable mixer node in soc dtsi file.
v4:
1) Remove the movement of common properties to Exynos5.dtsi for
I2C and hdmi subsystem.
2) Change the title of the patches.
v3:
1) Rebase to kgene for-next based on 3.11-rc1.
2) Changes clock numbers as per updated clocks file for
exyno5250 and exynos5420.
3) Dropped Sachin patch as already got merged.
v2:
1) Added patch for moving common i2c properties to exynos5.dtsi
2) Added patch for moving common hdmi, mixer properties to exynos5.dtsi
3) moved hpd pinctrl node to board file.
4) Added Sachin's patch to update binding document for hdmi with hpd
information.
Andrew Bresticker (1):
ARM: dts: add i2c device nodes for Exynos5420
Rahul Sharma (4):
of/documentation: update with clock information for exynos hdmi
subsystem
ARM: dts: add clocks to hdmi dt node for exynos5250
ARM: dts: add dt nodes for hdmi subsystem for exynos5420
ARM: dts: enable hdmi subsystem for exynos5420 smdk board
Sean Paul (1):
ARM: dts: add mixer clocks to mixer node for Exynos5250
.../devicetree/bindings/video/exynos_hdmi.txt | 14 +++-
.../devicetree/bindings/video/exynos_mixer.txt | 4 ++
arch/arm/boot/dts/exynos5250.dtsi | 8 ++-
arch/arm/boot/dts/exynos5420-smdk5420.dts | 26 +++++++
arch/arm/boot/dts/exynos5420.dtsi | 75 ++++++++++++++++++++
5 files changed, 123 insertions(+), 4 deletions(-)
--
1.7.10.4
next reply other threads:[~2013-08-29 13:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 13:52 Rahul Sharma [this message]
2013-08-29 13:35 ` [PATCH v7 0/6] ARM: dts: add support for exynos hdmi subsystem Tomasz Figa
2013-08-30 4:43 ` Rahul Sharma
[not found] ` <CAPdUM4N7DeBkO8Dt859toB92SRskBc8wkGDCNJXt4Fz=YXSOBg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-30 7:51 ` Kukjin Kim
2013-08-29 13:52 ` [PATCH v7 1/6] of/documentation: update with clock information " Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 2/6] ARM: dts: add mixer clocks to mixer node for Exynos5250 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 3/6] ARM: dts: add clocks to hdmi dt node for exynos5250 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 4/6] ARM: dts: add i2c device nodes for Exynos5420 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 5/6] ARM: dts: add dt nodes for hdmi subsystem for exynos5420 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 6/6] ARM: dts: enable hdmi subsystem for exynos5420 smdk board Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377784377-28426-1-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=s.nawrocki@samsung.com \
--cc=sw0312.kim@samsung.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).