From: Xiubo Li <Li.Xiubo@freescale.com>
To: r65073@freescale.com, thierry.reding@gmail.com
Cc: mark.rutland@arm.com, linux-pwm@vger.kernel.org,
linux@arm.linux.org.uk, ian.campbell@citrix.com,
pawel.moll@arm.com, swarren@wwwdotorg.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
rob.herring@calxeda.com, devicetree@vger.kernel.org,
rob@landley.net, grant.likely@linaro.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.
Date: Fri, 30 Aug 2013 17:48:50 +0800 [thread overview]
Message-ID: <1377856132-11290-3-git-send-email-Li.Xiubo@freescale.com> (raw)
In-Reply-To: <1377856132-11290-1-git-send-email-Li.Xiubo@freescale.com>
This adds devicetree for VF610, with necessary support for leds,
backlight motor, etc.
And there are 8 channels supported default.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
---
arch/arm/boot/dts/vf610.dtsi | 103 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 102 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 67d929c..44787b5 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -140,6 +140,37 @@
clock-names = "pit";
};
+ pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40038000 0x1000>;
+ clock-names = "ftm0", "ftm0_fix_sel", "ftm0_ext_sel";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>;
+ pinctrl-names = "ch0-active", "ch0-idle", "ch1-active", "ch1-idle",
+ "ch2-active", "ch2-idle", "ch3-active", "ch3-idle",
+ "ch4-active", "ch4-idle", "ch5-active", "ch5-idle",
+ "ch6-active", "ch6-idle", "ch7-active", "ch7-idle";
+ pinctrl-0 = <&pinctrl_pwm0_ch0_active>;
+ pinctrl-1 = <&pinctrl_pwm0_ch0_idle>;
+ pinctrl-2 = <&pinctrl_pwm0_ch1_active>;
+ pinctrl-3 = <&pinctrl_pwm0_ch1_idle>;
+ pinctrl-4 = <&pinctrl_pwm0_ch2_active>;
+ pinctrl-5 = <&pinctrl_pwm0_ch2_idle>;
+ pinctrl-6 = <&pinctrl_pwm0_ch3_active>;
+ pinctrl-7 = <&pinctrl_pwm0_ch3_idle>;
+ pinctrl-8 = <&pinctrl_pwm0_ch4_active>;
+ pinctrl-9 = <&pinctrl_pwm0_ch4_idle>;
+ pinctrl-10 = <&pinctrl_pwm0_ch5_active>;
+ pinctrl-11 = <&pinctrl_pwm0_ch5_idle>;
+ pinctrl-12 = <&pinctrl_pwm0_ch6_active>;
+ pinctrl-13 = <&pinctrl_pwm0_ch6_idle>;
+ pinctrl-14 = <&pinctrl_pwm0_ch7_active>;
+ pinctrl-15 = <&pinctrl_pwm0_ch7_idle>;
+ status = "disabled";
+ };
+
wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
@@ -270,16 +301,86 @@
};
pwm0 {
- pinctrl_pwm0_1: pwm0grp_1 {
+ pinctrl_pwm0_ch0_active: pwm0grp_ch0_active {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch0_idle: pwm0grp_ch0_idle {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch1_active: pwm0grp_ch1_active {
+ fsl,pins = <
VF610_PAD_PTB1__FTM0_CH1 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch1_idle: pwm0grp_ch1_idle {
+ fsl,pins = <
+ VF610_PAD_PTB1__FTM0_CH1 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch2_active: pwm0grp_ch2_active {
+ fsl,pins = <
VF610_PAD_PTB2__FTM0_CH2 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch2_idle: pwm0grp_ch2_idle {
+ fsl,pins = <
+ VF610_PAD_PTB2__FTM0_CH2 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch3_active: pwm0grp_ch3_active {
+ fsl,pins = <
VF610_PAD_PTB3__FTM0_CH3 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch3_idle: pwm0grp_ch3_idle {
+ fsl,pins = <
+ VF610_PAD_PTB3__FTM0_CH3 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch4_active: pwm0grp_ch4_active {
+ fsl,pins = <
+ VF610_PAD_PTB4__FTM0_CH4 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch4_idle: pwm0grp_ch4_idle {
+ fsl,pins = <
+ VF610_PAD_PTB4__FTM0_CH4 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch5_active: pwm0grp_ch5_active {
+ fsl,pins = <
+ VF610_PAD_PTB5__FTM0_CH5 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch5_idle: pwm0grp_ch5_idle {
+ fsl,pins = <
+ VF610_PAD_PTB5__FTM0_CH5 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch6_active: pwm0grp_ch6_active {
+ fsl,pins = <
VF610_PAD_PTB6__FTM0_CH6 0x1582
+ >;
+ };
+ pinctrl_pwm0_ch6_idle: pwm0grp_ch6_idle {
+ fsl,pins = <
+ VF610_PAD_PTB6__FTM0_CH6 0x0000
+ >;
+ };
+ pinctrl_pwm0_ch7_active: pwm0grp_ch7_active {
+ fsl,pins = <
VF610_PAD_PTB7__FTM0_CH7 0x1582
>;
};
+ pinctrl_pwm0_ch7_idle: pwm0grp_ch7_idle {
+ fsl,pins = <
+ VF610_PAD_PTB7__FTM0_CH7 0x0000
+ >;
+ };
};
qspi0 {
--
1.8.0
next prev parent reply other threads:[~2013-08-30 9:48 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-30 9:48 [PATCHv2 0/4] Add Freescale FTM PWM driver for Vybrid VF610 TOWER Xiubo Li
2013-08-30 9:48 ` [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support Xiubo Li
2013-08-30 17:49 ` Sascha Hauer
2013-09-02 3:33 ` Xiubo Li-B47053
2013-09-02 8:56 ` Sascha Hauer
2013-09-03 4:17 ` Xiubo Li-B47053
2013-09-03 6:58 ` Sascha Hauer
2013-09-03 7:40 ` Xiubo Li-B47053
2013-08-30 9:48 ` Xiubo Li [this message]
2013-08-30 9:48 ` [PATCHv2 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board Xiubo Li
2013-08-30 9:48 ` [PATCHv2 4/4] Documentation: Add device tree bindings for Freescale FTM PWM Xiubo Li
2013-08-30 17:30 ` Sascha Hauer
2013-09-02 2:38 ` Xiubo Li-B47053
2013-09-02 8:52 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377856132-11290-3-git-send-email-Li.Xiubo@freescale.com \
--to=li.xiubo@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=r65073@freescale.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).