From: Pekon Gupta <pekon@ti.com>
To: dedekind1@gmail.com, olof@lixom.net, computersforpeace@gmail.com
Cc: dwmw2@infradead.org, arnd@arndb.de, tony@atomide.com,
benoit.cousson@linaro.org, avinashphilipk@gmail.com,
balbi@ti.com, linux-mtd@lists.infradead.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Pekon Gupta <pekon@ti.com>
Subject: [PATCH v6 4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
Date: Thu, 12 Sep 2013 17:20:19 +0530 [thread overview]
Message-ID: <1378986619-26765-5-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1378986619-26765-1-git-send-email-pekon@ti.com>
DT property values for OMAP based gpmc-nand have been updated
to match changes in commit:
6faf096 ARM: OMAP2+: cleaned-up DT support of various ECC schemes
Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
Signed-off-by: Pekon Gupta <pekon@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e8ec875..e28a2ac 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -268,7 +268,7 @@
nand@0,0 {
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
- ti,nand-ecc-opt = "bch8";
+ ti,nand-ecc-scheme = "bch8";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
--
1.8.1
next prev parent reply other threads:[~2013-09-12 11:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-12 11:50 [PATCH v6 0/4] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-09-12 11:50 ` [PATCH v6 1/4] ARM: OMAP2+: cleaned-up DT support of various " Pekon Gupta
[not found] ` <1378986619-26765-2-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-09-24 18:04 ` Gupta, Pekon
[not found] ` <20980858CB6D3A4BAE95CA194937D5E73EA15ED7-yXqyApvAXouIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2013-09-25 13:46 ` Felipe Balbi
2013-09-25 17:46 ` Brian Norris
2013-09-25 17:55 ` Brian Norris
[not found] ` <20130925175527.GA23337-bU/DPfM3abD4WzifrMjOTkcViWtcw2C0@public.gmane.org>
2013-09-25 19:24 ` Gupta, Pekon
[not found] ` <20980858CB6D3A4BAE95CA194937D5E73EA16884-yXqyApvAXouIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2013-09-25 20:05 ` Brian Norris
[not found] ` <20130925200539.GH23337-bU/DPfM3abD4WzifrMjOTkcViWtcw2C0@public.gmane.org>
2013-09-25 20:33 ` Olof Johansson
2013-09-25 21:29 ` Brian Norris
2013-09-25 21:32 ` Olof Johansson
[not found] ` <CAOesGMi=xBXTdMm+-yTRVVFf0VR-7gy6xTrdeAupyo7OWVb3iQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-25 22:22 ` Brian Norris
[not found] ` <20130925212903.GI23337-bU/DPfM3abD4WzifrMjOTkcViWtcw2C0@public.gmane.org>
2013-09-26 9:18 ` Mark Rutland
2013-09-26 9:32 ` Gupta, Pekon
2013-09-26 6:15 ` Gupta, Pekon
2013-09-25 18:29 ` Brian Norris
2013-09-25 22:23 ` Rob Herring
2013-09-26 6:08 ` Gupta, Pekon
[not found] ` <20980858CB6D3A4BAE95CA194937D5E73EA16B0D-yXqyApvAXouIQmiDNMet8wC/G2K4zDHf@public.gmane.org>
2013-09-26 10:54 ` Gupta, Pekon
2013-09-26 17:09 ` Mark Rutland
2013-09-27 6:17 ` Gupta, Pekon
2013-09-26 17:27 ` Brian Norris
2013-09-12 11:50 ` [PATCH v6 2/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
[not found] ` <1378986619-26765-3-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-09-25 18:42 ` Brian Norris
2013-09-25 19:02 ` Brian Norris
2013-09-12 11:50 ` [PATCH v6 3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme Pekon Gupta
[not found] ` <1378986619-26765-4-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-09-25 19:13 ` Brian Norris
2013-09-12 11:50 ` Pekon Gupta [this message]
2013-09-25 19:15 ` [PATCH v6 4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt Brian Norris
[not found] ` <20130925191559.GF23337-bU/DPfM3abD4WzifrMjOTkcViWtcw2C0@public.gmane.org>
2013-09-26 11:28 ` Gupta, Pekon
2013-09-26 13:26 ` Javier Martinez Canillas
2013-09-26 10:58 ` [PATCH v6 0/4] mtd:nand:omap2: clean-up of supported ECC schemes Gupta, Pekon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378986619-26765-5-git-send-email-pekon@ti.com \
--to=pekon@ti.com \
--cc=arnd@arndb.de \
--cc=avinashphilipk@gmail.com \
--cc=balbi@ti.com \
--cc=benoit.cousson@linaro.org \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=olof@lixom.net \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).