[PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

[PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

[Lee Jones]

LPS001WP is a Pressure and Temperature sensor.

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/iio/pressure/lps001wp.txt   | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt

diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
new file mode 100644
index 0000000..45cb45c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
@@ -0,0 +1,21 @@
+* STMicroelectronics Pressure Sensor
+
+Required properties:
+  - compatible: Should be "st,lps001wp"
+  - reg: The I2C address of the sensor
+
+Optional properties:
+  - vdd-supply: Phandle to the Vdd supply regulator
+  - vddio-supply: Phandle to the Vdd-IO supply regulator
+
+Example:
+
+i2c@80128000 {
+        lps001wp@5c {
+                compatible = "st,lps001wp";
+                reg = <0x5c>;
+
+                vdd-supply = <&ab8500_ldo_aux1_reg>;
+                vddio-supply = <&db8500_vsmps2_reg>;
+        };
+};
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/20] Documentation: dt: iio: Add binding for LSM303DLH - Accel

[Lee Jones]

LSM303DLH is a Accelerometer Sensor

Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../devicetree/bindings/iio/accel/lsm303dlhc.txt    | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/lsm303dlhc.txt

diff --git a/Documentation/devicetree/bindings/iio/accel/lsm303dlhc.txt b/Documentation/devicetree/bindings/iio/accel/lsm303dlhc.txt
new file mode 100644
index 0000000..5a5101a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/lsm303dlhc.txt
@@ -0,0 +1,21 @@
+* STMicroelectronics Accelerometer Sensor
+
+Required properties:
+  - compatible: Should be "st,lsm303dlhc_accel"
+  - reg: The I2C address of the sensor
+
+Optional properties:
+  - vdd-supply: Phandle to the Vdd supply regulator
+  - vddio-supply: Phandle to the Vdd-IO supply regulator
+
+Example:
+
+i2c@80128000 {
+	lsm303dlhc_accel@19 {
+		compatible = "st,lsm303dlhc_accel";
+		reg = <0x19>;
+
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		vddio-supply = <&db8500_vsmps2_reg>;
+	};
+};
-- 
1.8.1.2

[PATCH 09/20] Documentation: dt: iio: Add binding for L3G4200D

[Lee Jones]

L3G4200D is a Gyroscope Sensor

Cc: devicetree@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../devicetree/bindings/iio/gyro/l3g4200d.txt       | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt

diff --git a/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt
new file mode 100644
index 0000000..3ca2b9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt
@@ -0,0 +1,21 @@
+* STMicroelectronics Gyroscope Sensor
+
+Required properties:
+  - compatible: Should be "st,l3g4200d"
+  - reg: The I2C address of the sensor
+
+Optional properties:
+  - vdd-supply: Phandle to the Vdd supply regulator
+  - vddio-supply: Phandle to the Vdd-IO supply regulator
+
+Example:
+
+i2c@80128000 {
+	l3g4200d@68 {
+		compatible = "st,l3g4200d";
+		reg = <0x68>;
+
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		vddio-supply = <&db8500_vsmps2_reg>;
+	};
+};
-- 
1.8.1.2

[PATCH 10/20] Documentation: dt: iio: Add binding for LSM303DLH - Magn

[Lee Jones]

LSM303DLH is a Magnetometer Sensor

Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../bindings/iio/magnetometer/lsm303dlhc.txt        | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/lsm303dlhc.txt

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/lsm303dlhc.txt b/Documentation/devicetree/bindings/iio/magnetometer/lsm303dlhc.txt
new file mode 100644
index 0000000..2ad49c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/lsm303dlhc.txt
@@ -0,0 +1,21 @@
+* STMicroelectronics Magnetometer Sensor
+
+Required properties:
+  - compatible: Should be "st,lsm303dlhc_magn"
+  - reg: The I2C address of the sensor
+
+Optional properties:
+  - vdd-supply: Phandle to the Vdd supply regulator
+  - vddio-supply: Phandle to the Vdd-IO supply regulator
+
+Example:
+
+i2c@80128000 {
+	lsm303dlhc_magn@1e {
+		compatible = "st,lsm303dlhc_magn";
+		reg = <0x1e>;
+
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		vddio-supply = <&db8500_vsmps2_reg>;
+	};
+};
-- 
1.8.1.2

Re: [PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

[Jonathan Cameron]

On 09/16/13 17:02, Lee Jones wrote:
> LPS001WP is a Pressure and Temperature sensor.
> 
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Hi Lee,

I'm planning to drop this set of bindings in favour of the unified ones
proposed by Lukasz Czerwinski.

Could you take a look at those and perhaps propose the additional bits and pieces
needed to ensure everything is covered by the resulting files?

Thanks,

Jonathan
> ---
>  .../devicetree/bindings/iio/pressure/lps001wp.txt   | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> new file mode 100644
> index 0000000..45cb45c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
> @@ -0,0 +1,21 @@
> +* STMicroelectronics Pressure Sensor
> +
> +Required properties:
> +  - compatible: Should be "st,lps001wp"
> +  - reg: The I2C address of the sensor
> +
> +Optional properties:
> +  - vdd-supply: Phandle to the Vdd supply regulator
> +  - vddio-supply: Phandle to the Vdd-IO supply regulator
> +
> +Example:
> +
> +i2c@80128000 {
> +        lps001wp@5c {
> +                compatible = "st,lps001wp";
> +                reg = <0x5c>;
> +
> +                vdd-supply = <&ab8500_ldo_aux1_reg>;
> +                vddio-supply = <&db8500_vsmps2_reg>;
> +        };
> +};
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP

[Jonathan Cameron]

On 10/01/13 22:09, Jonathan Cameron wrote:
> On 09/16/13 17:02, Lee Jones wrote:
>> LPS001WP is a Pressure and Temperature sensor.
>>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Signed-off-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Hi Lee,
> 
> I'm planning to drop this set of bindings in favour of the unified ones
> proposed by Lukasz Czerwinski.
Sorry, I just realised this is unclear.  I'm proposing to drop the
documentation added in this patch in favour of the other version
in which a file per type of sensor is used rather than one per
individual sensor chip.
> 
> Could you take a look at those and perhaps propose the additional bits and pieces
> needed to ensure everything is covered by the resulting files?
> 
> Thanks,
> 
> Jonathan
>> ---
>>  .../devicetree/bindings/iio/pressure/lps001wp.txt   | 21 +++++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
>> new file mode 100644
>> index 0000000..45cb45c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/pressure/lps001wp.txt
>> @@ -0,0 +1,21 @@
>> +* STMicroelectronics Pressure Sensor
>> +
>> +Required properties:
>> +  - compatible: Should be "st,lps001wp"
>> +  - reg: The I2C address of the sensor
>> +
>> +Optional properties:
>> +  - vdd-supply: Phandle to the Vdd supply regulator
>> +  - vddio-supply: Phandle to the Vdd-IO supply regulator
>> +
>> +Example:
>> +
>> +i2c@80128000 {
>> +        lps001wp@5c {
>> +                compatible = "st,lps001wp";
>> +                reg = <0x5c>;
>> +
>> +                vdd-supply = <&ab8500_ldo_aux1_reg>;
>> +                vddio-supply = <&db8500_vsmps2_reg>;
>> +        };
>> +};
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html