From: Leela Krishna Amudala <l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 3/4] watchdog: s3c2410_wdt: parse watchdog dt node to read PMU registers adresses
Date: Tue, 17 Sep 2013 16:13:42 +0530 [thread overview]
Message-ID: <1379414623-26329-4-git-send-email-l.krishna@samsung.com> (raw)
In-Reply-To: <1379414623-26329-1-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
This patch parses the watchdog node to read pmu wdt sys registers addresses
and do mask/unmask enable/disable of WDT in probe and s2r scenarios.
Reviewed-by: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Signed-off-by: Leela Krishna Amudala <l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
.../devicetree/bindings/watchdog/samsung-wdt.txt | 14 ++++-
drivers/watchdog/s3c2410_wdt.c | 56 ++++++++++++++++++++
2 files changed, 69 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 2aa486c..4c798e3 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -7,8 +7,20 @@ occurred.
Required properties:
- compatible : should be "samsung,s3c2410-wdt"
- reg : base physical address of the controller and length of memory mapped
- region.
+ region and the optional (addresses and length of memory mapped regions
+ of) PMU registers for masking/unmasking WDT.
- interrupts : interrupt number to the cpu.
Optional properties:
- timeout-sec : contains the watchdog timeout in seconds.
+- reset-mask-bit: bit number in the PMU registers to program mask/unmask WDT.
+
+Example:
+
+watchdog {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x101D0000 0x100>, <0x10040408 0x4>, <0x1004040c 0x4>;
+ interrupts = <0 42 0>;
+ status = "disabled";
+ reset-mask-bit = <0>;
+};
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 23aad7c..a68e4dd 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -94,6 +94,9 @@ struct s3c2410_wdt {
unsigned long wtdat_save;
struct watchdog_device wdt_device;
struct notifier_block freq_transition;
+ void __iomem *pmu_disable_reg;
+ void __iomem *pmu_mask_reset_reg;
+ int pmu_mask_bit;
};
/* watchdog control routines */
@@ -111,6 +114,33 @@ static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
return container_of(nb, struct s3c2410_wdt, freq_transition);
}
+static void s3c2410wdt_mask_and_disable_reset(int mask, struct s3c2410_wdt *wdt)
+{
+ unsigned int value;
+
+ if (IS_ERR(wdt->pmu_disable_reg) || IS_ERR(wdt->pmu_mask_reset_reg)
+ || (wdt->pmu_mask_bit < 0))
+ return;
+
+ if (mask) {
+ value = readl(wdt->pmu_disable_reg);
+ value |= (1 << wdt->pmu_mask_bit);
+ writel(value, wdt->pmu_disable_reg);
+
+ value = readl(wdt->pmu_mask_reset_reg);
+ value |= (1 << wdt->pmu_mask_bit);
+ writel(value, wdt->pmu_mask_reset_reg);
+ } else {
+ value = readl(wdt->pmu_disable_reg);
+ value &= ~(1 << wdt->pmu_mask_bit);
+ writel(value, wdt->pmu_disable_reg);
+
+ value = readl(wdt->pmu_mask_reset_reg);
+ value &= ~(1 << wdt->pmu_mask_bit);
+ writel(value, wdt->pmu_mask_reset_reg);
+ }
+}
+
static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
{
struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
@@ -341,6 +371,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
unsigned int wtcon;
int started = 0;
int ret;
+ struct resource *res;
+ unsigned int mask_bit;
DBG("%s: probe=%p\n", __func__, pdev);
@@ -369,6 +401,25 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
goto err;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ wdt->pmu_disable_reg = devm_ioremap_resource(&pdev->dev, res);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ wdt->pmu_mask_reset_reg = devm_ioremap_resource(&pdev->dev, res);
+
+ if (!IS_ERR(wdt->pmu_disable_reg) && !IS_ERR(wdt->pmu_mask_reset_reg)) {
+ if (pdev->dev.of_node) {
+ if (of_property_read_u32(pdev->dev.of_node,
+ "reset-mask-bit",
+ &mask_bit)) {
+ dev_warn(dev, "reset-mask-bit not specified\n");
+ wdt->pmu_mask_bit = -EINVAL;
+ } else {
+ wdt->pmu_mask_bit = mask_bit;
+ }
+ }
+ }
+
DBG("probe: mapped reg_base=%p\n", wdt->reg_base);
wdt->clock = devm_clk_get(dev, "watchdog");
@@ -444,6 +495,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
(wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
(wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
+ s3c2410wdt_mask_and_disable_reset(0, wdt);
return 0;
err_cpufreq:
@@ -461,6 +513,7 @@ static int s3c2410wdt_remove(struct platform_device *dev)
{
struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
+ s3c2410wdt_mask_and_disable_reset(1, wdt);
watchdog_unregister_device(&wdt->wdt_device);
s3c2410wdt_cpufreq_deregister(wdt);
@@ -475,6 +528,7 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
{
struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
+ s3c2410wdt_mask_and_disable_reset(1, wdt);
s3c2410wdt_stop(&wdt->wdt_device);
}
@@ -488,6 +542,7 @@ static int s3c2410wdt_suspend(struct device *dev)
wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
+ s3c2410wdt_mask_and_disable_reset(1, wdt);
/* Note that WTCNT doesn't need to be saved. */
s3c2410wdt_stop(&wdt->wdt_device);
@@ -503,6 +558,7 @@ static int s3c2410wdt_resume(struct device *dev)
writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
+ s3c2410wdt_mask_and_disable_reset(0, wdt);
dev_info(dev, "watchdog %sabled\n",
(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-17 10:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-17 10:43 [PATCH 0/4] Add watchdog DT nodes and parse it to read PMU registers addresses Leela Krishna Amudala
2013-09-17 10:43 ` [PATCH 1/4] ARM: dts: Fix the watchdog DT node name for Exynos5 Leela Krishna Amudala
[not found] ` <1379414623-26329-1-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-09-17 10:43 ` [PATCH 2/4] ARM: dts: add watchdog device tree node for exynos5420 Leela Krishna Amudala
2013-09-17 10:43 ` Leela Krishna Amudala [this message]
[not found] ` <1379414623-26329-4-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-09-17 13:30 ` [PATCH 3/4] watchdog: s3c2410_wdt: parse watchdog dt node to read PMU registers adresses Tomasz Figa
2013-09-18 4:34 ` Doug Anderson
[not found] ` <CAD=FV=XQSLULsYanJCCFehxrs9LESZ=KO8XgyzZaacL4GNeXPA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-18 6:50 ` Leela Krishna Amudala
2013-09-23 17:03 ` Bartlomiej Zolnierkiewicz
2013-09-23 17:11 ` Tomasz Figa
2013-09-27 10:12 ` Tomasz Figa
2013-09-27 11:18 ` Leela Krishna Amudala
[not found] ` <CAL1wa8cDAui8AJXvmYPpPEWtUum-ZNpW2hQWjwKLpzXBFLv=eA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-27 11:25 ` Tomasz Figa
2013-09-27 15:20 ` Doug Anderson
[not found] ` <CAD=FV=WZBrJ5Qhky6VQqfu59LVQcKMTdLa+gJwnnFM85bEzzNQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-27 18:14 ` Tomasz Figa
2013-09-27 18:48 ` Doug Anderson
[not found] ` <CAD=FV=Wa0BpmE7mQoAk-RC_g9QCCz2T_7=Pd46CDSN8Z9KQ8jg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-29 1:49 ` Tomasz Figa
2013-09-30 16:54 ` Doug Anderson
2013-09-30 17:20 ` Tomasz Figa
2013-09-17 10:43 ` [PATCH 4/4] ARM: dts: exynos: add PMU registers addresses and mask bit to watchdog node Leela Krishna Amudala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379414623-26329-4-git-send-email-l.krishna@samsung.com \
--to=l.krishna-sze3o3uu22jbdgjk7y7tuq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).