From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laxman Dewangan Subject: [PATCH REPOST] ARM: tegra: use dt-binding header for key code Date: Wed, 18 Sep 2013 18:52:32 +0530 Message-ID: <1379510552-23401-1-git-send-email-ldewangan@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: swarren@nvidia.com Cc: linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Laxman Dewangan List-Id: devicetree@vger.kernel.org In place of hardcoding the key code in DTS file and comment the key code as side notes, use the key code macro defines in the dt-bindings/input/input.h directly. Signed-off-by: Laxman Dewangan --- Reposting this patch as it was sent earlier when merge window was closed. arch/arm/boot/dts/tegra114-dalmore.dts | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 6023028..05a3aae 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include #include "tegra114.dtsi" / { @@ -1081,26 +1082,26 @@ home { label = "Home"; gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; - linux,code = <102>; /* KEY_HOME */ + linux,code = ; }; power { label = "Power"; gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = ; gpio-key,wakeup; }; volume_down { label = "Volume Down"; gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; - linux,code = <114>; /* KEY_VOLUMEDOWN */ + linux,code = ; }; volume_up { label = "Volume Up"; gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; - linux,code = <115>; /* KEY_VOLUMEUP */ + linux,code = ; }; }; -- 1.7.1.1