From: Eduardo Valentin <eduardo.valentin@ti.com>
To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com
Cc: grant.likely@linaro.org, durgadoss.r@intel.com,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
Eduardo Valentin <eduardo.valentin@ti.com>,
Jean Delvare <khali@linux-fr.org>
Subject: [PATCH 06/16] hwmon: tmp102: expose to thermal fw via DT nodes
Date: Wed, 18 Sep 2013 12:23:10 -0400 [thread overview]
Message-ID: <1379521390-17404-1-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1379457245-17810-1-git-send-email-eduardo.valentin@ti.com>
This patch adds to tmp102 temperature sensor the possibility
to expose itself as thermal zone device, registered on the
thermal framework.
The thermal zone is built only if a device tree node
describing a thermal zone for this sensor is present
inside the tmp102 DT node. Otherwise, the driver behavior
will be the same.
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
drivers/hwmon/tmp102.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
---
Hi Guenter,
Very minor change, removing comment, as requested.
Eduardo
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index d7b47ab..6748b45 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -27,6 +27,8 @@
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/jiffies.h>
+#include <linux/thermal.h>
+#include <linux/of.h>
#define DRIVER_NAME "tmp102"
@@ -50,6 +52,7 @@
struct tmp102 {
struct device *hwmon_dev;
+ struct thermal_zone_device *tz;
struct mutex lock;
u16 config_orig;
unsigned long last_update;
@@ -93,6 +96,15 @@ static struct tmp102 *tmp102_update_device(struct i2c_client *client)
return tmp102;
}
+static int tmp102_read_temp(void *dev, long *temp)
+{
+ struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
+
+ *temp = tmp102->temp[0];
+
+ return 0;
+}
+
static ssize_t tmp102_show_temp(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -204,6 +216,12 @@ static int tmp102_probe(struct i2c_client *client,
goto fail_remove_sysfs;
}
+ tmp102->tz = thermal_zone_of_sensor_register(&client->dev, 0,
+ &client->dev,
+ tmp102_read_temp, NULL);
+ if (IS_ERR(tmp102->tz))
+ tmp102->tz = NULL;
+
dev_info(&client->dev, "initialized\n");
return 0;
@@ -220,6 +238,7 @@ static int tmp102_remove(struct i2c_client *client)
{
struct tmp102 *tmp102 = i2c_get_clientdata(client);
+ thermal_zone_of_sensor_unregister(&client->dev, tmp102->tz);
hwmon_device_unregister(tmp102->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
--
1.8.2.1.342.gfa7285d
next prev parent reply other threads:[~2013-09-18 16:23 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-15 22:02 [PATCH 00/16] device thermal limits represented in device tree nodes (v3) Eduardo Valentin
2013-09-15 22:02 ` [PATCH 03/16] drivers: thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-09-15 22:02 ` [PATCH 04/16] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-09-15 22:02 ` [PATCH 05/16] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
[not found] ` <1379282563-14650-6-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 23:22 ` Guenter Roeck
[not found] ` <5236411E.6040204-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-17 22:35 ` [PATCHv2 " Eduardo Valentin
2013-09-18 16:21 ` [PATCHv3 " Eduardo Valentin
2013-09-21 18:06 ` Guenter Roeck
2013-09-21 23:30 ` Eduardo Valentin
[not found] ` <523E2C1B.9010307-l0cyMroinI0@public.gmane.org>
2013-09-21 23:56 ` Guenter Roeck
2013-09-22 0:23 ` Eduardo Valentin
[not found] ` <523E388F.80707-l0cyMroinI0@public.gmane.org>
2013-09-22 2:24 ` Guenter Roeck
2013-09-15 22:02 ` [PATCH 06/16] hwmon: tmp102: " Eduardo Valentin
[not found] ` <1379282563-14650-7-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 23:33 ` Guenter Roeck
[not found] ` <523643D4.30208-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-17 22:29 ` Eduardo Valentin
[not found] ` <20130918111849.GA9148@roeck-us.net>
[not found] ` <20130918111849.GA9148-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 14:29 ` Eduardo Valentin
[not found] ` <5239B8B5.6050702-l0cyMroinI0@public.gmane.org>
2013-09-18 15:17 ` Guenter Roeck
[not found] ` <20130918151746.GA17065-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 15:54 ` Eduardo Valentin
[not found] ` <5239CCAA.7030505-l0cyMroinI0@public.gmane.org>
2013-09-18 15:57 ` Guenter Roeck
[not found] ` <20130918155732.GA17160-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 16:23 ` Eduardo Valentin
[not found] ` <5239D383.50009-l0cyMroinI0@public.gmane.org>
2013-09-18 17:08 ` Guenter Roeck
2013-09-17 22:34 ` [PATCHv2 " Eduardo Valentin
[not found] ` <1379457245-17810-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-18 11:06 ` Guenter Roeck
[not found] ` <20130918110649.GA9050-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 14:17 ` Eduardo Valentin
2013-09-18 16:23 ` Eduardo Valentin [this message]
[not found] ` <1379521390-17404-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-21 18:07 ` [PATCH " Guenter Roeck
[not found] ` <1379282563-14650-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-15 22:02 ` [PATCH 01/16] drivers: thermal: allow registering without .get_temp Eduardo Valentin
2013-09-15 22:02 ` [PATCH 02/16] drivers: thermal: introduce device tree parser Eduardo Valentin
2013-09-18 16:03 ` [PATCHv2 " Eduardo Valentin
2013-09-18 17:08 ` Guenter Roeck
[not found] ` <20130918170840.GA14830-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
2013-09-18 18:54 ` Eduardo Valentin
2013-09-18 19:02 ` [PATCHv3 " Eduardo Valentin
2013-09-18 19:11 ` Joe Perches
2013-09-18 19:44 ` Eduardo Valentin
2013-09-18 19:59 ` Joe Perches
2013-09-18 20:04 ` Eduardo Valentin
2013-09-15 22:02 ` [PATCH 07/16] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-09-15 22:02 ` [PATCH 08/16] arm: dts: add omap4 CPU thermal data Eduardo Valentin
2013-09-15 22:02 ` [PATCH 09/16] arm: dts: add omap4430 " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 10/16] arm: dts: add omap4460 " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 11/16] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-09-15 22:02 ` [PATCH 12/16] arm: dts: add cooling properties on omap4460 " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 13/16] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-09-15 22:02 ` [PATCH 14/16] arm: dts: add omap5 CORE " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 15/16] arm: dts: add omap5 " Eduardo Valentin
2013-09-15 22:02 ` [PATCH 16/16] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379521390-17404-1-git-send-email-eduardo.valentin@ti.com \
--to=eduardo.valentin@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=durgadoss.r@intel.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).