From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [RFC PATCH 06/15] phy: omap-pipe3: update compatibility string and DT binding Date: Thu, 19 Sep 2013 16:05:34 +0300 Message-ID: <1379595943-14622-7-git-send-email-rogerq@ti.com> References: <1379595943-14622-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1379595943-14622-1-git-send-email-rogerq@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: balbi@ti.com, bcousson@baylibre.com, tony@atomide.com Cc: balajitk@ti.com, kishon@ti.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Roger Quadros List-Id: devicetree@vger.kernel.org Improve compatibility string format to "ti,phy-pipe3-" where can be "usb3" or "sata". Remove "pcie" type as it is not yet supported due to missing DPLL data. Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/phy/omap-phy.txt | 3 +-- drivers/phy/phy-omap-pipe3.c | 8 ++------ 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/omap-phy.txt b/Documentation/devicetree/bindings/phy/omap-phy.txt index cf45b01..8e09ad3 100644 --- a/Documentation/devicetree/bindings/phy/omap-phy.txt +++ b/Documentation/devicetree/bindings/phy/omap-phy.txt @@ -47,8 +47,7 @@ usb2phy@4a0ad080 { OMAP PIPE3 PHY Required properties: - - compatible: Should be "ti,omap-usb3", "ti,omap-pipe3", "ti,omap-sata" - or "ti,omap-pcie" + - compatible: Should be "ti,phy-pipe3-usb3" or "ti,phy-pipe3-sata" - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". diff --git a/drivers/phy/phy-omap-pipe3.c b/drivers/phy/phy-omap-pipe3.c index 19d1664..67eeaeb 100644 --- a/drivers/phy/phy-omap-pipe3.c +++ b/drivers/phy/phy-omap-pipe3.c @@ -219,17 +219,13 @@ static struct phy_ops ops = { #ifdef CONFIG_OF static const struct of_device_id omap_pipe3_id_table[] = { { - .compatible = "ti,omap-pipe3", + .compatible = "ti,phy-pipe3-usb3", .data = dpll_map_usb, }, { - .compatible = "ti,omap-sata", + .compatible = "ti,phy-pipe3-sata", .data = dpll_map_sata, }, - { - .compatible = "ti,omap-usb3", - .data = dpll_map_usb, - }, {}, }; MODULE_DEVICE_TABLE(of, omap_pipe3_id_table); -- 1.7.4.1