From: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
To: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Jean-Christophe Plagniol-Villard
<plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>,
Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
Arnd Bergmann
<arnd.bergmann-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Sylwester Nawrocki
<sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH v4 2/2] ARM: vexpress: Add CLCD Device Tree properties
Date: Fri, 20 Sep 2013 15:20:00 +0100 [thread overview]
Message-ID: <1379686800-27269-2-git-send-email-pawel.moll@arm.com> (raw)
In-Reply-To: <1379686800-27269-1-git-send-email-pawel.moll-5wv7dgnIgG8@public.gmane.org>
... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).
Signed-off-by: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
---
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 23 ++++++++++++++++++++++-
arch/arm/boot/dts/vexpress-v2m.dtsi | 23 ++++++++++++++++++++++-
arch/arm/boot/dts/vexpress-v2p-ca9.dts | 20 ++++++++++++++++++++
3 files changed, 64 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index ac870fb..19bef38 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -230,9 +230,30 @@
clcd@1f0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
+
+ arm,pl11x,panel-data-pads = <0x300 0x301 0x302 0x303 0x304 0x305 0x306 0x307>,
+ <0x310 0x311 0x312 0x313 0x314 0x315 0x316 0x317>,
+ <0x320 0x321 0x322 0x323 0x324 0x325 0x326 0x327>;
+ arm,pl11x,framebuffer-base = <0x18000000 0x00800000>;
+ max-memory-bandwidth = <36864000>; /* Bps, 640x480@60 16bpp */
+ display-timings {
+ native-mode = <&v2m_clcd_timing0>;
+ v2m_clcd_timing0: vga {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
};
};
@@ -282,7 +303,7 @@
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 63500000>;
+ freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index f142036..14dd04a 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -229,9 +229,30 @@
clcd@1f000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f000 0x1000>;
+ interrupt-names = "combined";
interrupts = <14>;
clocks = <&v2m_oscclk1>, <&smbclk>;
clock-names = "clcdclk", "apb_pclk";
+
+ arm,pl11x,panel-data-pads = <0x300 0x301 0x302 0x303 0x304 0x305 0x306 0x307>,
+ <0x310 0x311 0x312 0x313 0x314 0x315 0x316 0x317>,
+ <0x320 0x321 0x322 0x323 0x324 0x325 0x326 0x327>;
+ arm,pl11x,framebuffer-base = <0x4c000000 0x00800000>;
+ max-memory-bandwidth = <36864000>; /* Bps, 640x480@60 16bpp */
+ display-timings {
+ native-mode = <&v2m_clcd_timing0>;
+ v2m_clcd_timing0: vga {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <2>;
+ };
+ };
};
};
@@ -281,7 +302,7 @@
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 63500000>;
+ freq-range = <23750000 65000000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 62d9b22..f80b48a 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -70,9 +70,29 @@
clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
interrupts = <0 44 4>;
clocks = <&oscclk1>, <&oscclk2>;
clock-names = "clcdclk", "apb_pclk";
+
+ arm,pl11x,panel-data-pads = <0x300 0x301 0x302 0x303 0x304 0x305 0x306 0x307>,
+ <0x310 0x311 0x312 0x313 0x314 0x315 0x316 0x317>,
+ <0x320 0x321 0x322 0x323 0x324 0x325 0x326 0x327>;
+ max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+ display-timings {
+ native-mode = <&clcd_timing0>;
+ clcd_timing0: xga {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
+ };
};
memory-controller@100e0000 {
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-20 14:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-20 14:19 [PATCH v4 1/2] video: ARM CLCD: Add DT support Pawel Moll
[not found] ` <1379686800-27269-1-git-send-email-pawel.moll-5wv7dgnIgG8@public.gmane.org>
2013-09-20 14:20 ` Pawel Moll [this message]
2013-09-27 10:43 ` Jon Medhurst (Tixy)
2013-09-27 13:51 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379686800-27269-2-git-send-email-pawel.moll@arm.com \
--to=pawel.moll-5wv7dgnigg8@public.gmane.org \
--cc=arnd.bergmann-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=tomi.valkeinen-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).