From: Joel Fernandes <joelf-l0cyMroinI0@public.gmane.org>
To: Benoit Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Grant Likely
<grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>,
Jason Kridner <jkridner-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>,
Koen Kooi <koen-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org>
Cc: Devicetree Discuss
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux OMAP List
<linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Linux ARM Kernel List
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Wed, 25 Sep 2013 17:01:03 -0500 [thread overview]
Message-ID: <1380146469-29496-4-git-send-email-joelf@ti.com> (raw)
In-Reply-To: <1380146469-29496-1-git-send-email-joelf-l0cyMroinI0@public.gmane.org>
From: "Mark A. Greer" <mgreer-luAo+O/VEmrlveNOaEYElw@public.gmane.org>
Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the SHAM module.
CC: Paul Walmsley <paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Mark A. Greer <mgreer-luAo+O/VEmrlveNOaEYElw@public.gmane.org>
---
.../devicetree/bindings/crypto/omap-sham.txt | 31 ++++++++++++++++++++++
arch/arm/boot/dts/am335x-bone.dts | 4 +++
arch/arm/boot/dts/am335x-evm.dts | 4 +++
arch/arm/boot/dts/am335x-evmsk.dts | 4 +++
arch/arm/boot/dts/am33xx.dtsi | 10 +++++++
5 files changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 0000000..b97710f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,31 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+ SHAM versions:
+ - "ti,omap2-sham" for OMAP2 & OMAP3.
+ - "ti,omap4-sham" for OMAP4 and AM33XX.
+ Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this module.
+- interrupts : the interrupt number for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifier for the rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+ /* AM335x */
+ sham: sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupt-parent = <&intc>;
+ interrupts = <109>;
+ dmas = <&edma 36>;
+ dma-names = "rx";
+ };
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 0d63348..8a9802e 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,3 +19,7 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
+
+&sham {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 23b0a3e..d59e51c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -522,3 +522,7 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
};
+
+&sham {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index bc93895..d45a330 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -424,3 +424,7 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
};
+
+&sham {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 553adc6..e77aa6e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -710,5 +710,15 @@
#size-cells = <1>;
status = "disabled";
};
+
+ sham: sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupt-parent = <&intc>;
+ interrupts = <109>;
+ dmas = <&edma 36>;
+ dma-names = "rx";
+ };
};
};
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-25 22:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 22:01 [PATCH 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Joel Fernandes
2013-09-25 22:01 ` [PATCH 1/9] omap4: dts: Add node for AES Joel Fernandes
2013-09-26 9:41 ` Benoit Cousson
2013-09-25 22:01 ` [PATCH 2/9] omap4: dts: Add node for DES3DES module Joel Fernandes
2013-09-25 22:01 ` [PATCH 6/9] ARM: am437x: dts: Add AES node for am437x Joel Fernandes
2013-09-25 22:01 ` [PATCH 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm Joel Fernandes
[not found] ` <1380146469-29496-1-git-send-email-joelf-l0cyMroinI0@public.gmane.org>
2013-09-25 22:01 ` Joel Fernandes [this message]
2013-09-25 22:01 ` [PATCH 4/9] ARM: dts: Add AES data and documentation for AM33XX Joel Fernandes
2013-09-25 22:01 ` [PATCH 5/9] am33xx: dts: Fix AES interrupt number Joel Fernandes
2013-09-25 22:01 ` [PATCH 7/9] ARM: am437x: dts: Add DES node for am437x Joel Fernandes
2013-09-25 22:01 ` [PATCH 9/9] dts: boneblack: add pinmux and hdmi node to enable display Joel Fernandes
2013-09-26 9:36 ` [PATCH 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380146469-29496-4-git-send-email-joelf@ti.com \
--to=joelf-l0cymroini0@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org \
--cc=jkridner-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org \
--cc=koen-hcmAuCOw+vXj4SYmN/TMmA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=paul-DWxLp4Yu+b8AvxtiuMwx3w@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).