From: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree
Date: Thu, 26 Sep 2013 12:46:14 +0200 [thread overview]
Message-ID: <1380192374-9531-2-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1380192374-9531-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
This patch enables the TVE which is driving the VGA connector on i.MX53-QSB.
Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
arch/arm/boot/dts/imx53-qsb.dts | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index cf1aef7..3bbedf7 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -173,6 +173,15 @@ memgpu: /memreserve/ 0xb0000000 0x04000000;
};
};
+ tve {
+ pinctrl_vga_sync_1: vgasync-grp1 {
+ fsl,pins = <
+ /* VGA_HSYNC, VSYNC with max drive strength */
+ MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+ MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+ >;
+ };
+ };
};
&uart1 {
@@ -280,8 +289,8 @@ memgpu: /memreserve/ 0xb0000000 0x04000000;
};
ldo8_reg: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
regulator-always-on;
};
@@ -318,6 +327,13 @@ memgpu: /memreserve/ 0xb0000000 0x04000000;
status = "okay";
};
+&tve {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vga_sync_1>;
+ dac-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
&usbh1 {
vbus-supply = <®_usb_vbus>;
phy_type = "utmi";
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-26 10:46 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 10:46 [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE Philipp Zabel
[not found] ` <1380192374-9531-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-26 10:46 ` Philipp Zabel [this message]
[not found] ` <1380192374-9531-2-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-27 1:16 ` [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree Shawn Guo
[not found] ` <20130927011643.GB25146-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2013-09-30 14:40 ` Philipp Zabel
[not found] ` <1380552008.3959.29.camel-/rZezPiN1rtR6QfukMTsflXZhhPuCNm+@public.gmane.org>
2013-10-05 1:58 ` Shawn Guo
[not found] ` <20131005015845.GC2734-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2014-01-23 14:08 ` Fabio Estevam
2013-09-27 1:15 ` [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380192374-9531-2-git-send-email-p.zabel@pengutronix.de \
--to=p.zabel-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).