From: Eduardo Valentin <eduardo.valentin@ti.com>
To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, wni@nvidia.com
Cc: devicetree@vger.kernel.org, durgadoss.r@intel.com,
linux-pm@vger.kernel.org, "Tony Lindgren" <tony@atomide.com>,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org,
"Eduardo Valentin" <eduardo.valentin@ti.com>,
"Benoît Cousson" <bcousson@baylibre.com>,
grant.likely@linaro.org, "Russell King" <linux@arm.linux.org.uk>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 10/18] arm: dts: add omap4 CPU thermal data
Date: Thu, 26 Sep 2013 23:13:17 -0400 [thread overview]
Message-ID: <1380251605-3804-11-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com>
This patch changes a dtsi file to contain the thermal data
for MPU domain on OMAP4 and later SoCs. This data will
enable the passive cooling with CPUfreq cooling device
at 100C and the system will do a thermal shutdown at 125C.
This thermal data can be reused across TI SoC devices.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-omap@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 41 ++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4-cpu-thermal.dtsi
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
new file mode 100644
index 0000000..65a6deb
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&bandgap 0>;
+
+ trips {
+ cpu_alert0: cpu_alert {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = THERMAL_TRIP_PASSIVE;
+ };
+ cpu_crit: cpu_crit {
+ temperature = <125000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = THERMAL_TRIP_CRITICAL;
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
--
1.8.2.1.342.gfa7285d
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2013-09-27 3:13 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 3:13 [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 01/18] thermal: allow registering without .get_temp Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 02/18] thermal: core: allow binding via .bind when tzp is present Eduardo Valentin
2013-11-06 2:56 ` Wei Ni
2013-09-27 3:13 ` [PATCHv7 03/18] thermal: introduce device tree parser Eduardo Valentin
2013-09-30 15:36 ` Mark Rutland
[not found] ` <20130930153614.GA22259-NuALmloUBlrZROr8t4l/smS4ubULX0JqMm0uRHvK7Nw@public.gmane.org>
2013-09-30 20:47 ` Eduardo Valentin
[not found] ` <1380251605-3804-4-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-10-01 2:39 ` [PATCHv8 " Eduardo Valentin
2013-10-07 20:51 ` Mark Rutland
2013-10-08 14:59 ` Eduardo Valentin
2013-11-05 18:08 ` Eduardo Valentin
[not found] ` <1380251605-3804-1-git-send-email-eduardo.valentin-l0cyMroinI0@public.gmane.org>
2013-09-27 3:13 ` [PATCHv4 04/18] thermal: core: introduce thermal_of_cooling_device_register Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 08/18] hwmon: tmp102: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 13/18] arm: dts: add cooling properties on omap4430 cpu node Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 17/18] arm: dts: add omap5 thermal data Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 18/18] arm: dts: add cooling properties on omap5 cpu node Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 05/18] thermal: cpu_cooling: introduce of_cpufreq_cooling_register Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 06/18] cpufreq: cpufreq-cpu0: add dt node parsing for cooling device properties Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 07/18] hwmon: lm75: expose to thermal fw via DT nodes Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 09/18] thermal: ti-soc-thermal: use thermal DT infrastructure Eduardo Valentin
2013-09-27 3:13 ` Eduardo Valentin [this message]
2013-09-27 3:13 ` [PATCHv4 11/18] arm: dts: add omap4430 thermal data Eduardo Valentin
2013-09-27 12:24 ` Nishanth Menon
2013-09-27 13:20 ` Eduardo Valentin
2013-09-27 13:26 ` Nishanth Menon
2013-09-27 13:42 ` Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 12/18] arm: dts: add omap4460 " Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 14/18] arm: dts: add cooling properties on omap4460 cpu node Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 15/18] arm: dts: add omap5 GPU thermal data Eduardo Valentin
2013-09-27 3:13 ` [PATCHv4 16/18] arm: dts: add omap5 CORE " Eduardo Valentin
2013-09-27 3:15 ` [PATCHv4 00/18] device thermal limits represented in device tree nodes (v4) Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380251605-3804-11-git-send-email-eduardo.valentin@ti.com \
--to=eduardo.valentin@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=durgadoss.r@intel.com \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).