[PATCH v12 4/7] arm: omap3: twl: add phy consumer data in twl4030_usb_data

[Kishon Vijay Abraham I <kishon@ti.com>]

The PHY framework uses the phy consumer data populated in platform data in the
case of non-dt boot to return the reference to the PHY when the controller
(PHY consumer) requests for it. So populated the phy consumer data in the platform
data of twl usb.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/mach-omap2/twl-common.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/twl.h>
 #include <linux/gpio.h>
 #include <linux/string.h>
+#include <linux/phy/phy.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void)
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+	PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+	.consumers = consumers,
+	.num_consumers = ARRAY_SIZE(consumers),
+};
+
 static struct twl4030_usb_data omap3_usb_pdata = {
 	.usb_mode	= T2_USB_MODE_ULPI,
+	.init_data	= &init_data,
 };
 
 static int omap3_batt_table[] = {
-- 
1.7.10.4