From: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Subject: Re: [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree
Date: Mon, 30 Sep 2013 16:40:08 +0200 [thread overview]
Message-ID: <1380552008.3959.29.camel@pizza.hi.pengutronix.de> (raw)
In-Reply-To: <20130927011643.GB25146-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
Am Freitag, den 27.09.2013, 09:16 +0800 schrieb Shawn Guo:
> On Thu, Sep 26, 2013 at 12:46:14PM +0200, Philipp Zabel wrote:
> > This patch enables the TVE which is driving the VGA connector on i.MX53-QSB.
> >
> > Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > ---
> > arch/arm/boot/dts/imx53-qsb.dts | 20 ++++++++++++++++++--
> > 1 file changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
> > index cf1aef7..3bbedf7 100644
> > --- a/arch/arm/boot/dts/imx53-qsb.dts
> > +++ b/arch/arm/boot/dts/imx53-qsb.dts
> > @@ -173,6 +173,15 @@ memgpu: /memreserve/ 0xb0000000 0x04000000;
> > };
> > };
> >
> > + tve {
> > + pinctrl_vga_sync_1: vgasync-grp1 {
> > + fsl,pins = <
> > + /* VGA_HSYNC, VSYNC with max drive strength */
> > + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
> > + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
> > + >;
> > + };
> > + };
> > };
> >
> > &uart1 {
> > @@ -280,8 +289,8 @@ memgpu: /memreserve/ 0xb0000000 0x04000000;
> > };
> >
> > ldo8_reg: ldo8 {
> > - regulator-min-microvolt = <1200000>;
> > - regulator-max-microvolt = <3600000>;
> > + regulator-min-microvolt = <2750000>;
> > + regulator-max-microvolt = <2750000>;
>
> Why this change?
According to the reference manual, the TVDAC supply should be 2.75 V. If
there are no ill effects if this ldo is actually set to 3.6 V, this
change could be dropped.
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-09-30 14:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-26 10:46 [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE Philipp Zabel
[not found] ` <1380192374-9531-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-26 10:46 ` [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree Philipp Zabel
[not found] ` <1380192374-9531-2-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2013-09-27 1:16 ` Shawn Guo
[not found] ` <20130927011643.GB25146-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2013-09-30 14:40 ` Philipp Zabel [this message]
[not found] ` <1380552008.3959.29.camel-/rZezPiN1rtR6QfukMTsflXZhhPuCNm+@public.gmane.org>
2013-10-05 1:58 ` Shawn Guo
[not found] ` <20131005015845.GC2734-rvtDTF3kK1ictlrPMvKcciBecyulp+rMXqFh9Ls21Oc@public.gmane.org>
2014-01-23 14:08 ` Fabio Estevam
2013-09-27 1:15 ` [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380552008.3959.29.camel@pizza.hi.pengutronix.de \
--to=p.zabel-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).