devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Joel Fernandes <joelf@ti.com>
To: Linux OMAP List <linux-omap@vger.kernel.org>,
	Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
	Linux MMC List <linux-mmc@vger.kernel.org>,
	Benoit Cousson <bcousson@baylibre.com>
Cc: Paul Walmsley <paul@pwsan.com>,
	Rob Herring <rob.herring@calxeda.com>,
	Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Landley <rob@landley.net>, Tony Lindgren <tony@atomide.com>,
	Russell King <linux@arm.linux.org.uk>,
	"Mark A. Greer" <mgreer@animalcreek.com>,
	"open list:OPEN FIRMWARE AND..." <devicetree@vger.kernel.org>,
	"open list:DOCUMENTATION" <linux-doc@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX
Date: Mon, 30 Sep 2013 10:13:00 -0500	[thread overview]
Message-ID: <1380553986-15910-4-git-send-email-joelf@ti.com> (raw)
In-Reply-To: <1380553986-15910-1-git-send-email-joelf@ti.com>

From: "Mark A. Greer" <mgreer@animalcreek.com>

Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms.  Also add Documentation file describing the data
for the SHAM module.

[joelf@ti.com: Dropped interrupt-parrent property]
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
---
 .../devicetree/bindings/crypto/omap-sham.txt       | 31 ++++++++++++++++++++++
 arch/arm/boot/dts/am335x-bone.dts                  |  4 +++
 arch/arm/boot/dts/am335x-evm.dts                   |  4 +++
 arch/arm/boot/dts/am335x-evmsk.dts                 |  4 +++
 arch/arm/boot/dts/am33xx.dtsi                      |  9 +++++++
 5 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt

diff --git a/Documentation/devicetree/bindings/crypto/omap-sham.txt b/Documentation/devicetree/bindings/crypto/omap-sham.txt
new file mode 100644
index 0000000..b97710f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,31 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  SHAM versions:
+  - "ti,omap2-sham" for OMAP2 & OMAP3.
+  - "ti,omap4-sham" for OMAP4 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupt-parent : the phandle for the interrupt controller that
+  services interrupts for this module.
+- interrupts : the interrupt number for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifier for the rx dma. See the DMA client binding,
+	Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+	/* AM335x */
+	sham: sham@53100000 {
+		compatible = "ti,omap4-sham";
+		ti,hwmods = "sham";
+		reg = <0x53100000 0x200>;
+		interrupt-parent = <&intc>;
+		interrupts = <109>;
+		dmas = <&edma 36>;
+		dma-names = "rx";
+	};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 0d63348..8a9802e 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -19,3 +19,7 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 23b0a3e..d59e51c 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -522,3 +522,7 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index bc93895..d45a330 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -424,3 +424,7 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 };
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 553adc6..299710b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -710,5 +710,14 @@
 			#size-cells = <1>;
 			status = "disabled";
 		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
 	};
 };
-- 
1.8.1.2


  parent reply	other threads:[~2013-09-30 15:13 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1380553986-15910-1-git-send-email-joelf@ti.com>
2013-09-30 15:12 ` [PATCH v2 1/9] omap4: dts: Add node for AES Joel Fernandes
2013-09-30 15:12 ` [PATCH v2 2/9] omap4: dts: Add node for DES3DES module Joel Fernandes
2013-09-30 15:13 ` Joel Fernandes [this message]
2013-10-04 14:26   ` [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX Mark Rutland
2013-10-05 18:18     ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 4/9] ARM: dts: Add AES " Joel Fernandes
     [not found]   ` <1380553986-15910-5-git-send-email-joelf-l0cyMroinI0@public.gmane.org>
2013-10-04 14:33     ` Mark Rutland
2013-10-05 18:29       ` Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 5/9] am33xx: dts: Fix AES interrupt number Joel Fernandes
2013-10-04 14:19   ` Benoit Cousson
2013-09-30 15:13 ` [PATCH v2 6/9] ARM: am437x: dts: Add AES node for am437x Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 7/9] ARM: am437x: dts: Add DES " Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm Joel Fernandes
2013-09-30 15:13 ` [PATCH v2 9/9] dts: boneblack: add pinmux and hdmi node to enable display Joel Fernandes
2013-10-03 13:25 ` [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13 Benoit Cousson
2013-10-04  2:00   ` Joel Fernandes
2013-10-04 14:10     ` Benoit Cousson
2013-10-04 14:50       ` Joel Fernandes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380553986-15910-4-git-send-email-joelf@ti.com \
    --to=joelf@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mgreer@animalcreek.com \
    --cc=paul@pwsan.com \
    --cc=pawel.moll@arm.com \
    --cc=rob.herring@calxeda.com \
    --cc=rob@landley.net \
    --cc=swarren@wwwdotorg.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).