* [PATCH v8 1/8] usb: phy: omap-control: Get rid of platform data
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
@ 2013-10-03 9:58 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power() Roger Quadros
` (6 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:58 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
omap-control device is present from OMAP4 onwards which
support device tree boots only. So get rid of platform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/phy/phy-omap-control.c | 12 +++---------
include/linux/usb/omap_control_usb.h | 4 ----
2 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index a4dda8e..9772592 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -197,8 +197,6 @@ static int omap_control_usb_probe(struct platform_device *pdev)
{
struct resource *res;
struct device_node *np = pdev->dev.of_node;
- struct omap_control_usb_platform_data *pdata =
- dev_get_platdata(&pdev->dev);
control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
GFP_KERNEL);
@@ -207,14 +205,10 @@ static int omap_control_usb_probe(struct platform_device *pdev)
return -ENOMEM;
}
- if (np) {
+ if (np)
of_property_read_u32(np, "ti,type", &control_usb->type);
- } else if (pdata) {
- control_usb->type = pdata->type;
- } else {
- dev_err(&pdev->dev, "no pdata present\n");
- return -EINVAL;
- }
+ else
+ return -EINVAL; /* We only support DT boot */
control_usb->dev = &pdev->dev;
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 27b5b8c..e2416b4 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -31,10 +31,6 @@ struct omap_control_usb {
u32 type;
};
-struct omap_control_usb_platform_data {
- u8 type;
-};
-
enum omap_control_usb_mode {
USB_MODE_UNDEFINED = 0,
USB_MODE_HOST,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
2013-10-03 9:58 ` [PATCH v8 1/8] usb: phy: omap-control: Get rid of platform data Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 3/8] usb: phy: omap-usb2: Don't use omap_get_control_dev() Roger Quadros
` (5 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
Add support for new device types and in the process rid of "ti,type"
device tree property. The correct type of device will be determined
from the compatible string instead.
Introduce a compatible string for each device type. At the moment
we support 4 types OTGHS, USB2, PIPE3 (e.g. USB3) and DRA7USB2.
Update DT binding information to reflect these changes.
Also get rid of omap_control_usb3_phy_power(). Just one function
i.e. omap_control_usb_phy_power() will now take care of all PHY types.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 30 ++--
drivers/usb/phy/phy-omap-control.c | 173 +++++++++++--------
drivers/usb/phy/phy-omap-usb3.c | 6 +-
include/linux/usb/omap_control_usb.h | 24 ++--
4 files changed, 130 insertions(+), 103 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 661cb06..9add35c 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -83,22 +83,22 @@ omap_dwc3 {
OMAP CONTROL USB
Required properties:
- - compatible: Should be "ti,omap-control-usb"
+ - compatible: Should be one of
+ "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4.
+ "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register
+ e.g. USB2_PHY on OMAP5.
+ "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control
+ e.g. USB3 PHY and SATA PHY on OMAP5.
+ "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on
+ DRA7 platform.
- reg : Address and length of the register set for the device. It contains
- the address of "control_dev_conf" and "otghs_control" or "phy_power_usb"
- depending upon omap4 or omap5.
- - reg-names: The names of the register addresses corresponding to the registers
- filled in "reg".
- - ti,type: This is used to differentiate whether the control module has
- usb mailbox or usb3 phy power. omap4 has usb mailbox in control module to
- notify events to the musb core and omap5 has usb3 phy power register to
- power on usb3 phy. Should be "1" if it has mailbox and "2" if it has usb3
- phy power.
+ the address of "otghs_control" for control-phy-otghs or "power" register
+ for other types.
+ - reg-names: should be "otghs_control" control-phy-otghs and "power" for
+ other types.
omap_control_usb: omap-control-usb@4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a00233c 0x4>;
- reg-names = "control_dev_conf", "otghs_control";
- ti,type = <1>;
+ compatible = "ti,control-phy-otghs";
+ reg = <0x4a00233c 0x4>;
+ reg-names = "otghs_control";
};
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 9772592..1c8a7c5 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
@@ -46,61 +47,70 @@ struct device *omap_get_control_dev(void)
EXPORT_SYMBOL_GPL(omap_get_control_dev);
/**
- * omap_control_usb3_phy_power - power on/off the serializer using control
- * module
+ * omap_control_usb_phy_power - power on/off the phy using control module reg
* @dev: the control module device
- * @on: 0 to off and 1 to on based on powering on or off the PHY
- *
- * usb3 PHY driver should call this API to power on or off the PHY.
+ * @on: 0 or 1, based on powering on or off the PHY
*/
-void omap_control_usb3_phy_power(struct device *dev, bool on)
+void omap_control_usb_phy_power(struct device *dev, int on)
{
u32 val;
unsigned long rate;
- struct omap_control_usb *control_usb = dev_get_drvdata(dev);
+ struct omap_control_usb *control_usb;
- if (control_usb->type != OMAP_CTRL_DEV_TYPE2)
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
return;
+ }
- rate = clk_get_rate(control_usb->sys_clk);
- rate = rate/1000000;
-
- val = readl(control_usb->phy_power);
-
- if (on) {
- val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
- OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
- val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
- } else {
- val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
- val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
- OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ control_usb = dev_get_drvdata(dev);
+ if (!control_usb) {
+ dev_err(dev, "%s: invalid control usb device\n", __func__);
+ return;
}
- writel(val, control_usb->phy_power);
-}
-EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power);
+ if (control_usb->type == OMAP_CTRL_TYPE_OTGHS)
+ return;
-/**
- * omap_control_usb_phy_power - power on/off the phy using control module reg
- * @dev: the control module device
- * @on: 0 or 1, based on powering on or off the PHY
- */
-void omap_control_usb_phy_power(struct device *dev, int on)
-{
- u32 val;
- struct omap_control_usb *control_usb = dev_get_drvdata(dev);
+ val = readl(control_usb->power);
+
+ switch (control_usb->type) {
+ case OMAP_CTRL_TYPE_USB2:
+ if (on)
+ val &= ~OMAP_CTRL_DEV_PHY_PD;
+ else
+ val |= OMAP_CTRL_DEV_PHY_PD;
+ break;
- val = readl(control_usb->dev_conf);
+ case OMAP_CTRL_TYPE_PIPE3:
+ rate = clk_get_rate(control_usb->sys_clk);
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT;
+ }
+ break;
- if (on)
- val &= ~OMAP_CTRL_DEV_PHY_PD;
- else
- val |= OMAP_CTRL_DEV_PHY_PD;
+ case OMAP_CTRL_TYPE_DRA7USB2:
+ if (on)
+ val &= ~OMAP_CTRL_USB2_PHY_PD;
+ else
+ val |= OMAP_CTRL_USB2_PHY_PD;
+ break;
+ default:
+ dev_err(dev, "%s: type %d not recognized\n",
+ __func__, control_usb->type);
+ break;
+ }
- writel(val, control_usb->dev_conf);
+ writel(val, control_usb->power);
}
EXPORT_SYMBOL_GPL(omap_control_usb_phy_power);
@@ -172,7 +182,7 @@ void omap_control_usb_set_mode(struct device *dev,
{
struct omap_control_usb *ctrl_usb;
- if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1)
+ if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_TYPE_OTGHS)
return;
ctrl_usb = dev_get_drvdata(dev);
@@ -193,10 +203,45 @@ void omap_control_usb_set_mode(struct device *dev,
}
EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
+#ifdef CONFIG_OF
+
+static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+ {
+ .compatible = "ti,control-phy-otghs",
+ .data = &otghs_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2",
+ .data = &usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-pipe3",
+ .data = &pipe3_data,
+ },
+ {
+ .compatible = "ti,control-phy-dra7usb2",
+ .data = &dra7usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+#endif
+
+
static int omap_control_usb_probe(struct platform_device *pdev)
{
struct resource *res;
- struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb),
GFP_KERNEL);
@@ -205,36 +250,27 @@ static int omap_control_usb_probe(struct platform_device *pdev)
return -ENOMEM;
}
- if (np)
- of_property_read_u32(np, "ti,type", &control_usb->type);
- else
- return -EINVAL; /* We only support DT boot */
-
- control_usb->dev = &pdev->dev;
+ control_usb->dev = &pdev->dev;
+ control_usb->type = *(enum omap_control_usb_type *)of_id->data;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "control_dev_conf");
- control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(control_usb->dev_conf))
- return PTR_ERR(control_usb->dev_conf);
-
- if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
+ if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
if (IS_ERR(control_usb->otghs_control))
return PTR_ERR(control_usb->otghs_control);
- }
-
- if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
+ } else {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "phy_power_usb");
- control_usb->phy_power = devm_ioremap_resource(
- &pdev->dev, res);
- if (IS_ERR(control_usb->phy_power))
- return PTR_ERR(control_usb->phy_power);
+ "power");
+ control_usb->power = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_usb->power)) {
+ dev_err(&pdev->dev, "Couldn't get power register\n");
+ return PTR_ERR(control_usb->power);
+ }
+ }
+ if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) {
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
if (IS_ERR(control_usb->sys_clk)) {
@@ -243,20 +279,11 @@ static int omap_control_usb_probe(struct platform_device *pdev)
}
}
-
dev_set_drvdata(control_usb->dev, control_usb);
return 0;
}
-#ifdef CONFIG_OF
-static const struct of_device_id omap_control_usb_id_table[] = {
- { .compatible = "ti,omap-control-usb" },
- {}
-};
-MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
-#endif
-
static struct platform_driver omap_control_usb_driver = {
.probe = omap_control_usb_probe,
.driver = {
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index 4e8a040..0824be4 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -100,7 +100,7 @@ static int omap_usb3_suspend(struct usb_phy *x, int suspend)
udelay(1);
} while (--timeout);
- omap_control_usb3_phy_power(phy->control_dev, 0);
+ omap_control_usb_phy_power(phy->control_dev, 0);
phy->is_suspended = 1;
} else if (!suspend && phy->is_suspended) {
@@ -189,7 +189,7 @@ static int omap_usb3_init(struct usb_phy *x)
if (ret)
return ret;
- omap_control_usb3_phy_power(phy->control_dev, 1);
+ omap_control_usb_phy_power(phy->control_dev, 1);
return 0;
}
@@ -245,7 +245,7 @@ static int omap_usb3_probe(struct platform_device *pdev)
return -ENODEV;
}
- omap_control_usb3_phy_power(phy->control_dev, 0);
+ omap_control_usb_phy_power(phy->control_dev, 0);
usb_add_phy_dev(&phy->phy);
platform_set_drvdata(pdev, phy);
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index e2416b4..61b889a 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -19,16 +19,23 @@
#ifndef __OMAP_CONTROL_USB_H__
#define __OMAP_CONTROL_USB_H__
+enum omap_control_usb_type {
+ OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */
+ OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */
+ OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */
+ OMAP_CTRL_TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+};
+
struct omap_control_usb {
struct device *dev;
- u32 __iomem *dev_conf;
u32 __iomem *otghs_control;
- u32 __iomem *phy_power;
+ u32 __iomem *power;
+ u32 __iomem *power_aux;
struct clk *sys_clk;
- u32 type;
+ enum omap_control_usb_type type;
};
enum omap_control_usb_mode {
@@ -38,10 +45,6 @@ enum omap_control_usb_mode {
USB_MODE_DISCONNECT,
};
-/* To differentiate ctrl module IP having either mailbox or USB3 PHY power */
-#define OMAP_CTRL_DEV_TYPE1 0x1
-#define OMAP_CTRL_DEV_TYPE2 0x2
-
#define OMAP_CTRL_DEV_PHY_PD BIT(0)
#define OMAP_CTRL_DEV_AVALID BIT(0)
@@ -59,10 +62,11 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3
#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0
+#define OMAP_CTRL_USB2_PHY_PD BIT(28)
+
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
extern struct device *omap_get_control_dev(void);
extern void omap_control_usb_phy_power(struct device *dev, int on);
-extern void omap_control_usb3_phy_power(struct device *dev, bool on);
extern void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
#else
@@ -75,10 +79,6 @@ static inline void omap_control_usb_phy_power(struct device *dev, int on)
{
}
-static inline void omap_control_usb3_phy_power(struct device *dev, int on)
-{
-}
-
static inline void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode)
{
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 3/8] usb: phy: omap-usb2: Don't use omap_get_control_dev()
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
2013-10-03 9:58 ` [PATCH v8 1/8] usb: phy: omap-control: Get rid of platform data Roger Quadros
2013-10-03 9:59 ` [PATCH v8 2/8] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power() Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 4/8] usb: phy: omap-usb3: " Roger Quadros
` (4 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: devicetree, george.cherian, sergei.shtylyov, tony, bigeasy,
linux-usb, linux-kernel, kishon, thomas.langer, linux-omap,
linux-arm-kernel, Roger Quadros
omap_get_control_dev() is being deprecated as it doesn't support
multiple instances. As control device is present only from OMAP4
onwards which supports DT only, we use phandles to get the
reference to the control device.
As we don't support non-DT boot, we just bail out on probe
if device node is not present.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/phy/phy-omap-usb2.c | 31 +++++++++++++++++++++++--------
1 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 4d7b4e5..bfc5c33 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
#include <linux/phy/phy.h>
+#include <linux/of_platform.h>
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
@@ -145,10 +146,16 @@ static struct phy_ops ops = {
static int omap_usb2_probe(struct platform_device *pdev)
{
- struct omap_usb *phy;
- struct phy *generic_phy;
- struct usb_otg *otg;
- struct phy_provider *phy_provider;
+ struct omap_usb *phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct usb_otg *otg;
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
+ if (!node)
+ return -EINVAL;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy) {
@@ -175,12 +182,20 @@ static int omap_usb2_probe(struct platform_device *pdev)
if (IS_ERR(phy_provider))
return PTR_ERR(phy_provider);
- phy->control_dev = omap_get_control_dev();
- if (IS_ERR(phy->control_dev)) {
- dev_dbg(&pdev->dev, "Failed to get control device\n");
- return -ENODEV;
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(&pdev->dev, "Failed to get control device phandle\n");
+ return -EINVAL;
}
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+
+ phy->control_dev = &control_pdev->dev;
+
phy->is_suspended = 1;
omap_control_usb_phy_power(phy->control_dev, 0);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 4/8] usb: phy: omap-usb3: Don't use omap_get_control_dev()
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
` (2 preceding siblings ...)
2013-10-03 9:59 ` [PATCH v8 3/8] usb: phy: omap-usb2: Don't use omap_get_control_dev() Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 5/8] usb: musb: omap2430: " Roger Quadros
` (3 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
omap_get_control_dev() is being deprecated as it doesn't support
multiple instances. As control device is present only from OMAP4
onwards which supports DT only, we use phandles to get the
reference to the control device.
As we don't support non-DT boot, we just bail out on probe
if device node is not present.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/phy/phy-omap-usb3.c | 26 ++++++++++++++++++++------
1 files changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index 0824be4..0c6ba29 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -26,6 +26,7 @@
#include <linux/pm_runtime.h>
#include <linux/delay.h>
#include <linux/usb/omap_control_usb.h>
+#include <linux/of_platform.h>
#define PLL_STATUS 0x00000004
#define PLL_GO 0x00000008
@@ -196,8 +197,14 @@ static int omap_usb3_init(struct usb_phy *x)
static int omap_usb3_probe(struct platform_device *pdev)
{
- struct omap_usb *phy;
- struct resource *res;
+ struct omap_usb *phy;
+ struct resource *res;
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
+ if (!node)
+ return -EINVAL;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy) {
@@ -239,11 +246,18 @@ static int omap_usb3_probe(struct platform_device *pdev)
return -EINVAL;
}
- phy->control_dev = omap_get_control_dev();
- if (IS_ERR(phy->control_dev)) {
- dev_dbg(&pdev->dev, "Failed to get control device\n");
- return -ENODEV;
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(&pdev->dev, "Failed to get control device phandle\n");
+ return -EINVAL;
}
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+
+ phy->control_dev = &control_pdev->dev;
omap_control_usb_phy_power(phy->control_dev, 0);
usb_add_phy_dev(&phy->phy);
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 5/8] usb: musb: omap2430: Don't use omap_get_control_dev()
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
` (3 preceding siblings ...)
2013-10-03 9:59 ` [PATCH v8 4/8] usb: phy: omap-usb3: " Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 6/8] ARM: dts: omap4: update omap-control-usb nodes Roger Quadros
` (2 subsequent siblings)
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
omap_get_control_dev() is being deprecated as it doesn't support
multiple instances. As control device is present only from OMAP4
onwards which supports DT only, we use phandles to get the
reference to the control device.
Also get rid of "ti,has-mailbox" property as it is redundant and
we can determine that from whether "ctrl-module" property is present
or not. Get rid of has_mailbox from musb_hdrc_platform_data as well.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 4 ---
drivers/usb/musb/omap2430.c | 25 +++++++++++--------
include/linux/usb/musb.h | 2 -
3 files changed, 14 insertions(+), 17 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 9add35c..090e5e2 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -3,9 +3,6 @@ OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS
OMAP MUSB GLUE
- compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
- ti,hwmods : must be "usb_otg_hs"
- - ti,has-mailbox : to specify that omap uses an external mailbox
- (in control module) to communicate with the musb core during device connect
- and disconnect.
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
- num-eps : Specifies the number of endpoints. This is also a
@@ -31,7 +28,6 @@ SOC specific device node entry
usb_otg_hs: usb_otg_hs@4a0ab000 {
compatible = "ti,omap4-musb";
ti,hwmods = "usb_otg_hs";
- ti,has-mailbox;
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index d0fc4d9..9eab645 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/usb/musb-omap.h>
#include <linux/usb/omap_control_usb.h>
+#include <linux/of_platform.h>
#include "musb_core.h"
#include "omap2430.h"
@@ -524,8 +525,12 @@ static int omap2430_probe(struct platform_device *pdev)
glue->dev = &pdev->dev;
glue->musb = musb;
glue->status = OMAP_MUSB_UNKNOWN;
+ glue->control_otghs = ERR_PTR(-ENODEV);
if (np) {
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev,
@@ -554,22 +559,20 @@ static int omap2430_probe(struct platform_device *pdev)
of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
of_property_read_u32(np, "power", (u32 *)&pdata->power);
config->multipoint = of_property_read_bool(np, "multipoint");
- pdata->has_mailbox = of_property_read_bool(np,
- "ti,has-mailbox");
pdata->board_data = data;
pdata->config = config;
- }
- if (pdata->has_mailbox) {
- glue->control_otghs = omap_get_control_dev();
- if (IS_ERR(glue->control_otghs)) {
- dev_vdbg(&pdev->dev, "Failed to get control device\n");
- ret = PTR_ERR(glue->control_otghs);
- goto err2;
+ control_node = of_parse_phandle(np, "ctrl-module", 0);
+ if (control_node) {
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ ret = -EINVAL;
+ goto err2;
+ }
+ glue->control_otghs = &control_pdev->dev;
}
- } else {
- glue->control_otghs = ERR_PTR(-ENODEV);
}
pdata->platform_ops = &omap2430_ops;
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..eb50525 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -99,8 +99,6 @@ struct musb_hdrc_platform_data {
/* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
u8 mode;
- u8 has_mailbox:1;
-
/* for clk_get() */
const char *clock;
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 6/8] ARM: dts: omap4: update omap-control-usb nodes
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
` (4 preceding siblings ...)
2013-10-03 9:59 ` [PATCH v8 5/8] usb: musb: omap2430: " Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 7/8] usb: phy: omap: get rid of omap_get_control_dev() Roger Quadros
2013-10-03 9:59 ` [PATCH v8 8/8] ARM: dts: omap5: update omap-control-usb node Roger Quadros
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
Split otghs_ctrl and USB2 PHY power-down into separate
omap-control-usb nodes. Get rid of "ti,type" property.
Also get rid of "ti,has-mailbox" property from usb_otg_hs
node and provide the ctrl-module phandle.
CC: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 1e8e2fe..ea4054b 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -519,7 +519,7 @@
usb2_phy: usb2phy@4a0ad080 {
compatible = "ti,omap-usb2";
reg = <0x4a0ad080 0x58>;
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb2phy>;
#phy-cells = <0>;
};
};
@@ -644,12 +644,16 @@
};
};
- omap_control_usb: omap-control-usb@4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a00233c 0x4>;
- reg-names = "control_dev_conf", "otghs_control";
- ti,type = <1>;
+ omap_control_usb2phy: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usbotg: control-phy@4a00233c {
+ compatible = "ti,control-phy-otghs";
+ reg = <0x4a00233c 0x4>;
+ reg-names = "otghs_control";
};
usb_otg_hs: usb_otg_hs@4a0ab000 {
@@ -664,7 +668,7 @@
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
- ti,has-mailbox;
+ ctrl-module = <&omap_control_usbotg>;
};
};
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 7/8] usb: phy: omap: get rid of omap_get_control_dev()
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
` (5 preceding siblings ...)
2013-10-03 9:59 ` [PATCH v8 6/8] ARM: dts: omap4: update omap-control-usb nodes Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
2013-10-03 9:59 ` [PATCH v8 8/8] ARM: dts: omap5: update omap-control-usb node Roger Quadros
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
This function was preventing us from supporting multiple
instances. Get rid of it. Since we support DT boots only,
users can get the control device phandle from the DT node.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
drivers/usb/phy/phy-omap-control.c | 31 ++++++++++---------------------
include/linux/usb/omap_control_usb.h | 5 -----
2 files changed, 10 insertions(+), 26 deletions(-)
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c
index 1c8a7c5..09c5ace 100644
--- a/drivers/usb/phy/phy-omap-control.c
+++ b/drivers/usb/phy/phy-omap-control.c
@@ -26,26 +26,6 @@
#include <linux/clk.h>
#include <linux/usb/omap_control_usb.h>
-static struct omap_control_usb *control_usb;
-
-/**
- * omap_get_control_dev - returns the device pointer for this control device
- *
- * This API should be called to get the device pointer for this control
- * module device. This device pointer should be used for called other
- * exported API's in this driver.
- *
- * To be used by PHY driver and glue driver.
- */
-struct device *omap_get_control_dev(void)
-{
- if (!control_usb)
- return ERR_PTR(-ENODEV);
-
- return control_usb->dev;
-}
-EXPORT_SYMBOL_GPL(omap_get_control_dev);
-
/**
* omap_control_usb_phy_power - power on/off the phy using control module reg
* @dev: the control module device
@@ -182,11 +162,19 @@ void omap_control_usb_set_mode(struct device *dev,
{
struct omap_control_usb *ctrl_usb;
- if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_TYPE_OTGHS)
+ if (IS_ERR(dev) || !dev)
return;
ctrl_usb = dev_get_drvdata(dev);
+ if (!ctrl_usb) {
+ dev_err(dev, "Invalid control usb device\n");
+ return;
+ }
+
+ if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS)
+ return;
+
switch (mode) {
case USB_MODE_HOST:
omap_control_usb_host_mode(ctrl_usb);
@@ -237,6 +225,7 @@ static int omap_control_usb_probe(struct platform_device *pdev)
{
struct resource *res;
const struct of_device_id *of_id;
+ struct omap_control_usb *control_usb;
of_id = of_match_device(of_match_ptr(omap_control_usb_id_table),
&pdev->dev);
diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/usb/omap_control_usb.h
index 61b889a..596b019 100644
--- a/include/linux/usb/omap_control_usb.h
+++ b/include/linux/usb/omap_control_usb.h
@@ -65,15 +65,10 @@ enum omap_control_usb_mode {
#define OMAP_CTRL_USB2_PHY_PD BIT(28)
#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB)
-extern struct device *omap_get_control_dev(void);
extern void omap_control_usb_phy_power(struct device *dev, int on);
extern void omap_control_usb_set_mode(struct device *dev,
enum omap_control_usb_mode mode);
#else
-static inline struct device *omap_get_control_dev(void)
-{
- return ERR_PTR(-ENODEV);
-}
static inline void omap_control_usb_phy_power(struct device *dev, int on)
{
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v8 8/8] ARM: dts: omap5: update omap-control-usb node
2013-10-03 9:58 [PATCH v8 0/8] phy: omap-usb: Support multiple instances and new types Roger Quadros
` (6 preceding siblings ...)
2013-10-03 9:59 ` [PATCH v8 7/8] usb: phy: omap: get rid of omap_get_control_dev() Roger Quadros
@ 2013-10-03 9:59 ` Roger Quadros
7 siblings, 0 replies; 10+ messages in thread
From: Roger Quadros @ 2013-10-03 9:59 UTC (permalink / raw)
To: balbi, bcousson
Cc: tony, george.cherian, kishon, bigeasy, sergei.shtylyov,
thomas.langer, linux-usb, linux-omap, linux-arm-kernel,
devicetree, linux-kernel, Roger Quadros
Split USB2 PHY and USB3 PHY into separate omap-control-usb
nodes. Get rid of "ti,type" property.
CC: Benoit Cousson <bcousson@baylibre.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 20 ++++++++++++--------
1 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 7cdea1b..c0ec6dc 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -626,12 +626,16 @@
hw-caps-temp-alert;
};
- omap_control_usb: omap-control-usb@4a002300 {
- compatible = "ti,omap-control-usb";
- reg = <0x4a002300 0x4>,
- <0x4a002370 0x4>;
- reg-names = "control_dev_conf", "phy_power_usb";
- ti,type = <2>;
+ omap_control_usb2phy: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb3phy: control-phy@4a002370 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
};
omap_dwc3@4a020000 {
@@ -662,7 +666,7 @@
usb2_phy: usb2phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x7c>;
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb2phy>;
};
usb3_phy: usb3phy@4a084400 {
@@ -671,7 +675,7 @@
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
- ctrl-module = <&omap_control_usb>;
+ ctrl-module = <&omap_control_usb3phy>;
};
};
--
1.7.4.1
^ permalink raw reply related [flat|nested] 10+ messages in thread