From: Pekon Gupta <pekon-l0cyMroinI0@public.gmane.org>
To: mark.rutland-5wv7dgnIgG8@public.gmane.org,
robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
dedekind1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: Pawel.Moll-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org,
dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
avinashphilipk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Pekon Gupta <pekon-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v7 6/6] mtd: nand: omap: updated devm_xx for all resource allocation and free calls
Date: Sat, 5 Oct 2013 01:19:48 +0530 [thread overview]
Message-ID: <1380916188-24206-7-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1380916188-24206-1-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
"Managed Device Resource" or devm_xx calls takes care of automatic freeing
of the resource in case of:
- failure during driver probe
- failure during resource allocation
- detaching or unloading of driver module (rmmod)
Reference: Documentation/driver-model/devres.txt
Though OMAP NAND driver handles freeing of resource allocation in most of
the cases, but using devm_xx provides more clean and effortless approach
to handle all such cases.
Signed-off-by: Pekon Gupta <pekon-l0cyMroinI0@public.gmane.org>
---
drivers/mtd/nand/omap2.c | 38 +++++++++++++++++++++-----------------
1 file changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index a783dae..0f2b0d1 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1658,7 +1658,8 @@ static int omap_nand_probe(struct platform_device *pdev)
return -ENODEV;
}
- info = kzalloc(sizeof(struct omap_nand_info), GFP_KERNEL);
+ info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
+ GFP_KERNEL);
if (!info)
return -ENOMEM;
@@ -1690,13 +1691,14 @@ static int omap_nand_probe(struct platform_device *pdev)
info->phys_base = res->start;
info->mem_size = resource_size(res);
- if (!request_mem_region(info->phys_base, info->mem_size,
- pdev->dev.driver->name)) {
+ if (!devm_request_mem_region(&pdev->dev, info->phys_base,
+ info->mem_size, pdev->dev.driver->name)) {
err = -EBUSY;
goto out_free_info;
}
- info->nand.IO_ADDR_R = ioremap(info->phys_base, info->mem_size);
+ info->nand.IO_ADDR_R = devm_ioremap(&pdev->dev, info->phys_base,
+ info->mem_size);
if (!info->nand.IO_ADDR_R) {
err = -ENOMEM;
goto out_release_mem_region;
@@ -1799,8 +1801,9 @@ static int omap_nand_probe(struct platform_device *pdev)
err = -ENODEV;
goto out_release_mem_region;
}
- err = request_irq(info->gpmc_irq_fifo, omap_nand_irq,
- IRQF_SHARED, "gpmc-nand-fifo", info);
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-fifo", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
info->gpmc_irq_fifo, err);
@@ -1814,8 +1817,9 @@ static int omap_nand_probe(struct platform_device *pdev)
err = -ENODEV;
goto out_release_mem_region;
}
- err = request_irq(info->gpmc_irq_count, omap_nand_irq,
- IRQF_SHARED, "gpmc-nand-count", info);
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-count", info);
if (err) {
dev_err(&pdev->dev, "requesting irq(%d) error:%d",
info->gpmc_irq_count, err);
@@ -2031,10 +2035,10 @@ out_release_mem_region:
if (info->dma)
dma_release_channel(info->dma);
if (info->gpmc_irq_count > 0)
- free_irq(info->gpmc_irq_count, info);
+ devm_free_irq(&pdev->dev, info->gpmc_irq_count, info);
if (info->gpmc_irq_fifo > 0)
- free_irq(info->gpmc_irq_fifo, info);
- release_mem_region(info->phys_base, info->mem_size);
+ devm_free_irq(&pdev->dev, info->gpmc_irq_fifo, info);
+ devm_release_mem_region(&pdev->dev, info->phys_base, info->mem_size);
out_free_info:
#ifdef CONFIG_MTD_NAND_ECC_BCH
if (info->nand.ecc.priv) {
@@ -2042,7 +2046,7 @@ out_free_info:
info->nand.ecc.priv = NULL;
}
#endif
- kfree(info);
+ devm_kfree(&pdev->dev, info);
return err;
}
@@ -2062,15 +2066,15 @@ static int omap_nand_remove(struct platform_device *pdev)
dma_release_channel(info->dma);
if (info->gpmc_irq_count > 0)
- free_irq(info->gpmc_irq_count, info);
+ devm_free_irq(&pdev->dev, info->gpmc_irq_count, info);
if (info->gpmc_irq_fifo > 0)
- free_irq(info->gpmc_irq_fifo, info);
+ devm_free_irq(&pdev->dev, info->gpmc_irq_fifo, info);
/* Release NAND device, its internal structures and partitions */
nand_release(&info->mtd);
- iounmap(info->nand.IO_ADDR_R);
- release_mem_region(info->phys_base, info->mem_size);
- kfree(info);
+ devm_iounmap(&pdev->dev, info->nand.IO_ADDR_R);
+ devm_release_mem_region(&pdev->dev, info->phys_base, info->mem_size);
+ devm_kfree(&pdev->dev, info);
return 0;
}
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-04 19:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-04 19:49 [PATCH v7 0/6] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-10-04 19:49 ` [PATCH v7 1/6] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes Pekon Gupta
2013-10-07 11:27 ` Mark Rutland
2013-10-07 11:42 ` Gupta, Pekon
2013-10-11 10:17 ` Gupta, Pekon
2013-10-11 11:53 ` Felipe Balbi
[not found] ` <1380916188-24206-1-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-10-04 19:49 ` [PATCH v7 2/6] ARM: OMAP2+: cleaned-up DT support of various ECC schemes Pekon Gupta
2013-10-07 11:35 ` Mark Rutland
2013-10-07 12:18 ` Gupta, Pekon
2013-10-04 19:49 ` [PATCH v7 5/6] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt Pekon Gupta
2013-10-07 11:40 ` Mark Rutland
2013-10-07 12:14 ` Gupta, Pekon
2013-10-04 19:49 ` Pekon Gupta [this message]
2013-10-04 19:49 ` [PATCH v7 3/6] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
2013-10-04 19:49 ` [PATCH v7 4/6] mtd:nand:omap2: updated support for BCH4 ECC scheme Pekon Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380916188-24206-7-git-send-email-pekon@ti.com \
--to=pekon-l0cymroini0@public.gmane.org \
--cc=Pawel.Moll-5wv7dgnIgG8@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=avinashphilipk-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=computersforpeace-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=dedekind1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=robherring2-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).