From: Pekon Gupta <pekon@ti.com>
To: mark.rutland@arm.com, olof@lixom.net,
computersforpeace@gmail.com, dedekind1@gmail.com,
tony@atomide.com, bcousson@baylibre.com
Cc: robherring2@gmail.com, Pawel.Moll@arm.com,
ijc+devicetree@hellion.org.uk, swarren@wwwdotorg.org,
dwmw2@infradead.org, arnd@arndb.de, avinashphilipk@gmail.com,
balbi@ti.com, linux-mtd@lists.infradead.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Pekon Gupta <pekon@ti.com>
Subject: [PATCH v9 8/9] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
Date: Tue, 15 Oct 2013 11:19:56 +0530 [thread overview]
Message-ID: <1381816197-20477-9-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1381816197-20477-1-git-send-email-pekon@ti.com>
Updated DTS to replace deprecated binding with newer values
Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 3 +--
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e8ec875..1aee6ac 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -269,7 +269,6 @@
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
- gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
@@ -296,7 +295,7 @@
#address-cells = <1>;
#size-cells = <1>;
- elm_id = <&elm>;
+ ti,elm-id = <&elm>;
/* MTD partition table */
partition@0 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bc..501f863 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -105,7 +105,7 @@
reg = <1 0 0x08000000>;
nand-bus-width = <8>;
- ti,nand-ecc-opt = "sw";
+ ti,nand-ecc-opt = "ham1";
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
--
1.8.1
next prev parent reply other threads:[~2013-10-15 5:49 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-15 5:49 [PATCH v9 0/9] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-10-15 5:49 ` [PATCH v9 1/9] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes Pekon Gupta
2013-10-18 10:59 ` Mark Rutland
2013-10-18 11:48 ` Gupta, Pekon
2013-10-15 5:49 ` [PATCH v9 2/9] ARM: OMAP2+: cleaned-up DT support of various ECC schemes Pekon Gupta
2013-10-15 5:49 ` [PATCH v9 3/9] mtd: nand: omap: cleanup: replace local references with generic framework names Pekon Gupta
2013-10-16 21:30 ` Brian Norris
2013-10-19 5:10 ` Gupta, Pekon
2013-10-15 5:49 ` [PATCH v9 4/9] mtd: nand: omap: enable auto-detection of bus-width for omap-nand drivers Pekon Gupta
2013-10-16 22:22 ` Brian Norris
2013-10-17 4:42 ` Gupta, Pekon
2013-10-17 18:30 ` Brian Norris
2013-10-17 21:00 ` Gupta, Pekon
2013-10-17 21:26 ` Gupta, Pekon
2013-10-17 21:43 ` Brian Norris
2013-10-19 9:11 ` Gupta, Pekon
2013-10-15 5:49 ` [PATCH v9 5/9] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
2013-10-17 1:58 ` Brian Norris
2013-10-15 5:49 ` [PATCH v9 6/9] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes Pekon Gupta
2013-10-17 2:06 ` Brian Norris
2013-10-15 5:49 ` [PATCH v9 7/9] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c Pekon Gupta
[not found] ` <1381816197-20477-8-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-10-17 2:22 ` Brian Norris
2013-10-17 10:14 ` Gupta, Pekon
2013-10-17 12:42 ` jean-philippe francois
2013-10-22 20:24 ` Brian Norris
2013-10-15 5:49 ` Pekon Gupta [this message]
2013-10-15 5:49 ` [PATCH v9 9/9] mtd: nand: omap: updated devm_xx for all resource allocation and free calls Pekon Gupta
2013-10-17 2:29 ` Brian Norris
2013-10-16 18:48 ` [PATCH v9 0/9] mtd:nand:omap2: clean-up of supported ECC schemes Gupta, Pekon
2013-10-17 2:35 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381816197-20477-9-git-send-email-pekon@ti.com \
--to=pekon@ti.com \
--cc=Pawel.Moll@arm.com \
--cc=arnd@arndb.de \
--cc=avinashphilipk@gmail.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robherring2@gmail.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).