From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: [PATCH v2 3/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/ti-phy.txt Date: Wed, 16 Oct 2013 01:24:13 +0530 Message-ID: <1381866857-3861-4-git-send-email-kishon@ti.com> References: <1381866857-3861-1-git-send-email-kishon@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1381866857-3861-1-git-send-email-kishon@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: kishon@ti.com, balbi@ti.com, gregkh@linuxfoundation.org Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux@arm.linux.org.uk, bcousson@baylibre.com, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, tony@atomide.com, swarren@wwwdotorg.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, rob.herring@calxeda.com, rob@landley.net, galak@codeaurora.org, grant.likely@linaro.org, s.nawrocki@samsung.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Since now we have a separate folder for phy, move the PHY dt binding documentation of TI to that folder. Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) rename Documentation/devicetree/bindings/{usb/usb-phy.txt => phy/ti-phy.txt} (86%) diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt similarity index 86% rename from Documentation/devicetree/bindings/usb/usb-phy.txt rename to Documentation/devicetree/bindings/phy/ti-phy.txt index c0245c8..355acf0 100644 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -1,4 +1,4 @@ -USB PHY +TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs OMAP USB2 PHY @@ -21,10 +21,11 @@ usb2phy@4a0ad080 { #phy-cells = <0>; }; -OMAP USB3 PHY +TI PIPE3 PHY Required properties: - - compatible: Should be "ti,omap-usb3" + - compatible: Should be "ti,phy-usb3", "ti,phy-pcie" or "ti,phy-sata". + "ti,omap-usb3" is deprecated. - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". @@ -38,7 +39,7 @@ Optional properties: This is usually a subnode of ocp2scp to which it is connected. usb3phy@4a084400 { - compatible = "ti,omap-usb3"; + compatible = "ti,phy-usb3"; reg = <0x4a084400 0x80>, <0x4a084800 0x64>, <0x4a084c00 0x40>; -- 1.7.10.4