From: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org,
Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 4/4] ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
Date: Wed, 16 Oct 2013 00:03:29 +0200 [thread overview]
Message-ID: <1381874609-14464-5-git-send-email-lisovy@gmail.com> (raw)
In-Reply-To: <1381874609-14464-1-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Supported peripherals: Audio -- headphone output, LEDs, Buttons
(using keyboard controller), SD-card.
Signed-off-by: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
create mode 100644 arch/arm/boot/dts/imx53-voipac-bsb.dts
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 0000000..7b48462
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+ sound {
+ compatible = "fsl,imx53-voipac-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-voipac-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio>;
+
+ led1 {
+ label = "led-red";
+ gpios = <&gpio3 29 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "led-orange";
+ gpios = <&gpio2 31 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SD2_CD */
+ MX53_PAD_EIM_D25__GPIO3_25 0x80000000
+ /* SD2_WP */
+ MX53_PAD_EIM_A19__GPIO2_19 0x80000000
+ >;
+ };
+
+ led_pin_gpio: led_gpio@0 {
+ fsl,pins = <
+ MX53_PAD_EIM_D29__GPIO3_29 0x80000000
+ MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
+ >;
+ };
+ };
+
+ /* Keyboard controller */
+ kpp {
+ pinctrl_kpp_1: kppgrp-1 {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0xe8
+ MX53_PAD_GPIO_4__KPP_COL_7 0xe8
+ MX53_PAD_KEY_COL2__KPP_COL_2 0xe8
+ MX53_PAD_KEY_COL3__KPP_COL_3 0xe8
+ MX53_PAD_KEY_COL4__KPP_COL_4 0xe8
+
+ MX53_PAD_GPIO_2__KPP_ROW_6 0xe0
+ MX53_PAD_GPIO_5__KPP_ROW_7 0xe0
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0
+ MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0
+ >;
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&clks 150>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <
+ 0x0203003b /* KEY_F1 */
+ 0x0603003c /* KEY_F2 */
+ 0x0207003d /* KEY_F3 */
+ 0x0607003e /* KEY_F4 */
+ >;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>; /* SSI1 */
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
+ cd-gpios = <&gpio3 25 0>;
+ wp-gpios = <&gpio2 19 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-15 22:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-15 22:03 [PATCH 0/4] Devicetree support for Voipac i.MX53 module Rostislav Lisovy
[not found] ` <1381874609-14464-1-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-15 22:03 ` [PATCH 1/4] ARM: dts: i.MX53: Add alternate pinmux option for i2c_3 Rostislav Lisovy
2013-10-15 22:03 ` [PATCH 2/4] ARM: dts: i.MX53: Internal keyboard controller Rostislav Lisovy
2013-10-15 22:03 ` [PATCH 3/4] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module Rostislav Lisovy
[not found] ` <1381874609-14464-4-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-11-01 22:58 ` Mark Rutland
2013-11-03 15:38 ` Rostislav Lisovy
2013-11-03 15:49 ` Tomasz Figa
2013-10-15 22:03 ` Rostislav Lisovy [this message]
2013-10-16 7:31 ` [PATCH 0/4] Devicetree support for Voipac i.MX53 module Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2013-10-22 17:07 [PATCH 0/4] Devicetree description " Rostislav Lisovy
2013-10-22 17:07 ` [PATCH 4/4] ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module Rostislav Lisovy
[not found] ` <1382461643-16790-5-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-23 7:33 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381874609-14464-5-git-send-email-lisovy@gmail.com \
--to=lisovy-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).