From: Nishanth Menon <nm@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>,
devicetree@vger.kernel.org,
Kevin Hilman <khilman@deeprootsystems.com>,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot
Date: Wed, 16 Oct 2013 10:39:00 -0500 [thread overview]
Message-ID: <1381937948-27057-1-git-send-email-nm@ti.com> (raw)
Hi,
This series enables the use of cpufreq-cpu0 generic driver for all
OMAP and related derivatives. Only patch#8 in the series, which
introduces CPU clock nodes, depends on Tero's V8 patch series for clock
nodes[1]
I will stop copy pasting the series complete history and point at [2].
Main changes since V6[3]:
- squashed patches for a minimal set
- i have organized the series such that 1 to 7 can immediately be merged
if desired:
- patches 1,2,3 can go to Tony's omap-for-v3.13/quirk [4]
- patches 4-7 can go to Benoit's for_3.13/dts [5]
- patch 8 needs to depend on [1] and should eventually go to [5]
NOTES: obviously without clock nodes cpufreq will not function.
Test Script: http://pastebin.com/VvJPjsne
Test-log:
BeagleBoard-XM (OMAP36xx): http://pastebin.com/XZDNaHPf
PandaBoard-ES (OMAP4460): http://pastebin.com/qQCmA2ng
BeagleBone-Black(AM335x): http://pastebin.com/98FX4uYW
OMAP5uEVM (OMAP5432): http://pastebin.com/NXj3L636
DRA7-EVM (DRA7xx): http://pastebin.com/0kKT3TXy
J Keerthy (3):
ARM: dts: dra7-evm: add smps123 supply for CPU
ARM: dts: OMAP5: Add CPU OPP table
ARM: dts: DRA7: Add CPU OPP table
Nishanth Menon (5):
ARM: OMAP3+: do not register non-dt OPP tables for device tree boot
ARM: OMAP2+: add missing lateinit hook for calling pm late init
ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
ARM: dts: omap5-uevm: add smps123 supply for CPU
ARM: dts: OMAP3: add clock nodes for CPU
[1] http://marc.info/?t=138133284200006&r=1&w=2
[2] http://marc.info/?l=linux-arm-kernel&m=136804009618594&w=2
[3] http://marc.info/?l=devicetree&m=138135419203492&w=2
[4] https://git.kernel.org/cgit/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v3.13/quirk
arch/arm/boot/dts/am33xx.dtsi | 4 ++++
arch/arm/boot/dts/dra7-evm.dts | 4 ++++
arch/arm/boot/dts/dra7.dtsi | 13 ++++++++++++-
arch/arm/boot/dts/omap3.dtsi | 5 +++++
arch/arm/boot/dts/omap4.dtsi | 5 +++++
arch/arm/boot/dts/omap5-uevm.dts | 4 ++++
arch/arm/boot/dts/omap5.dtsi | 15 ++++++++++++++-
arch/arm/mach-omap2/board-generic.c | 4 ++++
arch/arm/mach-omap2/common.h | 4 ++++
arch/arm/mach-omap2/io.c | 20 ++++++++++++++++++++
arch/arm/mach-omap2/opp.c | 4 ++++
arch/arm/mach-omap2/pm.c | 12 +++++++++---
12 files changed, 89 insertions(+), 5 deletions(-)
Regards,
Nishanth Menon
--
1.7.9.5
next reply other threads:[~2013-10-16 15:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 15:39 Nishanth Menon [this message]
2013-10-16 15:39 ` [PATCH V7 1/8] ARM: OMAP3+: do not register non-dt OPP tables for device tree boot Nishanth Menon
2013-10-16 15:39 ` [PATCH V7 2/8] ARM: OMAP2+: add missing lateinit hook for calling pm late init Nishanth Menon
2013-10-16 15:39 ` [PATCH V7 3/8] ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot Nishanth Menon
2013-10-22 15:11 ` Tony Lindgren
2013-10-16 15:39 ` [PATCH V7 4/8] ARM: dts: omap5-uevm: add smps123 supply for CPU Nishanth Menon
2013-10-16 15:39 ` [PATCH V7 5/8] ARM: dts: dra7-evm: " Nishanth Menon
[not found] ` <1381937948-27057-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
2013-10-16 15:39 ` [PATCH V7 6/8] ARM: dts: OMAP5: Add CPU OPP table Nishanth Menon
2013-10-16 15:39 ` [PATCH V7 7/8] ARM: dts: DRA7: " Nishanth Menon
2013-10-16 15:39 ` [PATCH V7 8/8] ARM: dts: OMAP3: add clock nodes for CPU Nishanth Menon
2013-10-22 15:49 ` [PATCH V7 0/8] ARM: OMAP3+: support cpufreq-cpu0 for device tree boot Benoit Cousson
2013-12-23 9:54 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381937948-27057-1-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).