From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nishanth Menon Subject: [PATCH V7 7/8] ARM: dts: DRA7: Add CPU OPP table Date: Wed, 16 Oct 2013 10:39:07 -0500 Message-ID: <1381937948-27057-8-git-send-email-nm@ti.com> References: <1381937948-27057-1-git-send-email-nm@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1381937948-27057-1-git-send-email-nm@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren Cc: Nishanth Menon , devicetree@vger.kernel.org, Kevin Hilman , J Keerthy , linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org From: J Keerthy Add DT OPP table for DRA7xx family of devices. This data is decoded by OF with of_init_opp_table() helper function. The data is based on DRA75x, DRA74x Data Manual revision F (Sept 2013). TODO: add OPP_HIGH after AVS-Class0 is functional NOTE: The voltage and frequency values work well only on NOM samples and it is mandatory to use ABB/AVS Class 0 support for all OPPs. Clock nodes are pending clock node alignment. [nm@ti.com: cleanups and rebase to latest] Signed-off-by: Nishanth Menon Signed-off-by: J Keerthy --- arch/arm/boot/dts/dra7.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 02e430b..92cbe3b 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -36,6 +36,12 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; }; cpu@1 { device_type = "cpu"; -- 1.7.9.5