From: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH 5/5] ARM: ux500: register all SSP and SPI blocks
Date: Fri, 18 Oct 2013 11:05:34 +0200 [thread overview]
Message-ID: <1382087134-31740-1-git-send-email-linus.walleij@linaro.org> (raw)
This adds the SSP and SPI blocks to the device tree and makes
them active. Only this way can their clocks be properly gated
off at boot.
Cc: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/ste-dbx5x0.dtsi | 75 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 74 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index b7d1738..9edc392 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -704,7 +704,80 @@
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disabled";
+ clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+ clock-names = "ssp0clk", "apb_pclk";
+ dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+ <&dma 8 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ };
+
+ ssp@80003000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80003000 0x1000>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+ clock-names = "ssp1clk", "apb_pclk";
+ dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+ <&dma 9 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ };
+
+ spi@8011a000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x8011a000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+ clock-names = "spi0clk", "apb_pclk";
+ dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+ <&dma 0 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ };
+
+ spi@80112000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80112000 0x1000>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+ clock-names = "spi1clk", "apb_pclk";
+ dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+ <&dma 35 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ };
+
+ spi@80111000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80111000 0x1000>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+ clock-names = "spi2clk", "apb_pclk";
+ dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+ <&dma 33 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+ };
+
+ spi@80129000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x80129000 0x1000>;
+ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Same clock wired to kernel and pclk */
+ clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+ clock-names = "spi3clk", "apb_pclk";
+ dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+ <&dma 40 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
};
uart@80120000 {
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2013-10-18 9:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-18 9:05 Linus Walleij [this message]
[not found] ` <1382087134-31740-1-git-send-email-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-10-18 10:55 ` [PATCH 5/5] ARM: ux500: register all SSP and SPI blocks Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382087134-31740-1-git-send-email-linus.walleij@linaro.org \
--to=linus.walleij-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).