* [PATCHv3][ 05/11] pinctrl: pinctrl-imx: add imx25 pinctrl driver
[not found] ` <1382109422-24454-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
2013-10-18 15:16 ` [PATCHv3][ 03/11] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-18 15:16 ` [PATCHv3][ 04/11] ARM: imx{25,27} DT: Permit the selection of the imxfb framebuffer driver Denis Carikli
@ 2013-10-18 15:16 ` Denis Carikli
2013-10-18 15:16 ` [PATCHv3][ 06/11] ARM: dts: imx25.dtsi: Add some pinmux pins Denis Carikli
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Denis Carikli @ 2013-10-18 15:16 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Eric Bénard, Denis Carikli, Rob Herring, Pawel Moll,
Mark Rutland, Stephen Warren, Ian Campbell,
devicetree-u79uwXL29TY76Z2rM5mHXA, Russell King, Linus Walleij
This is mostly cut and paste from the imx35 pinctrl driver.
The data was generated using sed and awk on
arch/arm/plat-mxc/include/mach/iomux-mx25.h.
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
.../bindings/pinctrl/fsl,imx25-pinctrl.txt | 33 ++
arch/arm/boot/dts/imx25-pinfunc.h | 513 ++++++++++++++++++++
arch/arm/boot/dts/imx25.dtsi | 1 +
arch/arm/mach-imx/Kconfig | 2 +
drivers/pinctrl/Kconfig | 8 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-imx25.c | 351 ++++++++++++++
7 files changed, 909 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
create mode 100644 arch/arm/boot/dts/imx25-pinfunc.h
create mode 100644 drivers/pinctrl/pinctrl-imx25.c
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
new file mode 100644
index 0000000..64906ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
@@ -0,0 +1,33 @@
+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx25-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx25 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13)
+PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE_CMOS (0 << 3)
+PAD_CTL_ODE_OPENDRAIN (1 << 3)
+PAD_CTL_DSE_NOMINAL (0 << 1)
+PAD_CTL_DSE_HIGH (1 << 1)
+PAD_CTL_DSE_MAX (2 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
new file mode 100644
index 0000000..0a9f9a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -0,0 +1,513 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CTL_GRP_DVS_MISC 0x000 0x418 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_FEC 0x000 0x41c 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_JTAG 0x000 0x420 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_NFC 0x000 0x424 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_CSI 0x000 0x428 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_WEIM 0x000 0x42c 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_DDR 0x000 0x430 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_CRM 0x000 0x434 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_KPP 0x000 0x438 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_SDHC1 0x000 0x43c 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_LCD 0x000 0x440 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_UART 0x000 0x444 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_NFC 0x000 0x448 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_CSI 0x000 0x44c 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DSE_CSPI1 0x000 0x450 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DDRTYPE 0x000 0x454 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_SDHC1 0x000 0x458 0x000 0x00 0x000
+#define MX25_PAD_CTL_GRP_DVS_LCD 0x000 0x45c 0x000 0x00 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 737ed5d..5f9879d 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -10,6 +10,7 @@
*/
#include "skeleton.dtsi"
+#include "imx25-pinfunc.h"
/ {
aliases {
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 23c1773..a0588bf 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -111,6 +111,8 @@ config SOC_IMX25
select COMMON_CLK
select CPU_ARM926T
select MXC_AVIC
+ select PINCTRL
+ select PINCTRL_IMX25
config SOC_IMX27
bool
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 21db201..d801589 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -98,6 +98,14 @@ config PINCTRL_IMX
select PINMUX
select PINCONF
+config PINCTRL_IMX25
+ bool "IMX25 pinctrl driver"
+ depends on OF
+ depends on SOC_IMX25
+ select PINCTRL_IMX
+ help
+ Say Y here to enable the imx25 pinctrl driver
+
config PINCTRL_IMX35
bool "IMX35 pinctrl driver"
depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index bbeb980..32a856e 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_PINCTRL_IMX6SL) += pinctrl-imx6sl.o
obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o
obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
diff --git a/drivers/pinctrl/pinctrl-imx25.c b/drivers/pinctrl/pinctrl-imx25.c
new file mode 100644
index 0000000..8994b43
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx25.c
@@ -0,0 +1,351 @@
+/*
+ * imx25 pinctrl driver.
+ *
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This driver was mostly copied from the imx51 pinctrl driver which has:
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro, Inc.
+ *
+ * Author: Dong Aisheng <dong.aisheng-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx25_pads {
+ MX25_PAD_RESERVE0 = 1,
+ MX25_PAD_RESERVE1 = 2,
+ MX25_PAD_A10 = 3,
+ MX25_PAD_A13 = 4,
+ MX25_PAD_A14 = 5,
+ MX25_PAD_A15 = 6,
+ MX25_PAD_A16 = 7,
+ MX25_PAD_A17 = 8,
+ MX25_PAD_A18 = 9,
+ MX25_PAD_A19 = 10,
+ MX25_PAD_A20 = 11,
+ MX25_PAD_A21 = 12,
+ MX25_PAD_A22 = 13,
+ MX25_PAD_A23 = 14,
+ MX25_PAD_A24 = 15,
+ MX25_PAD_A25 = 16,
+ MX25_PAD_EB0 = 17,
+ MX25_PAD_EB1 = 18,
+ MX25_PAD_OE = 19,
+ MX25_PAD_CS0 = 20,
+ MX25_PAD_CS1 = 21,
+ MX25_PAD_CS4 = 22,
+ MX25_PAD_CS5 = 23,
+ MX25_PAD_NF_CE0 = 24,
+ MX25_PAD_ECB = 25,
+ MX25_PAD_LBA = 26,
+ MX25_PAD_BCLK = 27,
+ MX25_PAD_RW = 28,
+ MX25_PAD_NFWE_B = 29,
+ MX25_PAD_NFRE_B = 30,
+ MX25_PAD_NFALE = 31,
+ MX25_PAD_NFCLE = 32,
+ MX25_PAD_NFWP_B = 33,
+ MX25_PAD_NFRB = 34,
+ MX25_PAD_D15 = 35,
+ MX25_PAD_D14 = 36,
+ MX25_PAD_D13 = 37,
+ MX25_PAD_D12 = 38,
+ MX25_PAD_D11 = 39,
+ MX25_PAD_D10 = 40,
+ MX25_PAD_D9 = 41,
+ MX25_PAD_D8 = 42,
+ MX25_PAD_D7 = 43,
+ MX25_PAD_D6 = 44,
+ MX25_PAD_D5 = 45,
+ MX25_PAD_D4 = 46,
+ MX25_PAD_D3 = 47,
+ MX25_PAD_D2 = 48,
+ MX25_PAD_D1 = 49,
+ MX25_PAD_D0 = 50,
+ MX25_PAD_LD0 = 51,
+ MX25_PAD_LD1 = 52,
+ MX25_PAD_LD2 = 53,
+ MX25_PAD_LD3 = 54,
+ MX25_PAD_LD4 = 55,
+ MX25_PAD_LD5 = 56,
+ MX25_PAD_LD6 = 57,
+ MX25_PAD_LD7 = 58,
+ MX25_PAD_LD8 = 59,
+ MX25_PAD_LD9 = 60,
+ MX25_PAD_LD10 = 61,
+ MX25_PAD_LD11 = 62,
+ MX25_PAD_LD12 = 63,
+ MX25_PAD_LD13 = 64,
+ MX25_PAD_LD14 = 65,
+ MX25_PAD_LD15 = 66,
+ MX25_PAD_HSYNC = 67,
+ MX25_PAD_VSYNC = 68,
+ MX25_PAD_LSCLK = 69,
+ MX25_PAD_OE_ACD = 70,
+ MX25_PAD_CONTRAST = 71,
+ MX25_PAD_PWM = 72,
+ MX25_PAD_CSI_D2 = 73,
+ MX25_PAD_CSI_D3 = 74,
+ MX25_PAD_CSI_D4 = 75,
+ MX25_PAD_CSI_D5 = 76,
+ MX25_PAD_CSI_D6 = 77,
+ MX25_PAD_CSI_D7 = 78,
+ MX25_PAD_CSI_D8 = 79,
+ MX25_PAD_CSI_D9 = 80,
+ MX25_PAD_CSI_MCLK = 81,
+ MX25_PAD_CSI_VSYNC = 82,
+ MX25_PAD_CSI_HSYNC = 83,
+ MX25_PAD_CSI_PIXCLK = 84,
+ MX25_PAD_I2C1_CLK = 85,
+ MX25_PAD_I2C1_DAT = 86,
+ MX25_PAD_CSPI1_MOSI = 87,
+ MX25_PAD_CSPI1_MISO = 88,
+ MX25_PAD_CSPI1_SS0 = 89,
+ MX25_PAD_CSPI1_SS1 = 90,
+ MX25_PAD_CSPI1_SCLK = 91,
+ MX25_PAD_CSPI1_RDY = 92,
+ MX25_PAD_UART1_RXD = 93,
+ MX25_PAD_UART1_TXD = 94,
+ MX25_PAD_UART1_RTS = 95,
+ MX25_PAD_UART1_CTS = 96,
+ MX25_PAD_UART2_RXD = 97,
+ MX25_PAD_UART2_TXD = 98,
+ MX25_PAD_UART2_RTS = 99,
+ MX25_PAD_UART2_CTS = 100,
+ MX25_PAD_SD1_CMD = 101,
+ MX25_PAD_SD1_CLK = 102,
+ MX25_PAD_SD1_DATA0 = 103,
+ MX25_PAD_SD1_DATA1 = 104,
+ MX25_PAD_SD1_DATA2 = 105,
+ MX25_PAD_SD1_DATA3 = 106,
+ MX25_PAD_KPP_ROW0 = 107,
+ MX25_PAD_KPP_ROW1 = 108,
+ MX25_PAD_KPP_ROW2 = 109,
+ MX25_PAD_KPP_ROW3 = 110,
+ MX25_PAD_KPP_COL0 = 111,
+ MX25_PAD_KPP_COL1 = 112,
+ MX25_PAD_KPP_COL2 = 113,
+ MX25_PAD_KPP_COL3 = 114,
+ MX25_PAD_FEC_MDC = 115,
+ MX25_PAD_FEC_MDIO = 116,
+ MX25_PAD_FEC_TDATA0 = 117,
+ MX25_PAD_FEC_TDATA1 = 118,
+ MX25_PAD_FEC_TX_EN = 119,
+ MX25_PAD_FEC_RDATA0 = 120,
+ MX25_PAD_FEC_RDATA1 = 121,
+ MX25_PAD_FEC_RX_DV = 122,
+ MX25_PAD_FEC_TX_CLK = 123,
+ MX25_PAD_RTCK = 124,
+ MX25_PAD_DE_B = 125,
+ MX25_PAD_GPIO_A = 126,
+ MX25_PAD_GPIO_B = 127,
+ MX25_PAD_GPIO_C = 128,
+ MX25_PAD_GPIO_D = 129,
+ MX25_PAD_GPIO_E = 130,
+ MX25_PAD_GPIO_F = 131,
+ MX25_PAD_EXT_ARMCLK = 132,
+ MX25_PAD_UPLL_BYPCLK = 133,
+ MX25_PAD_VSTBY_REQ = 134,
+ MX25_PAD_VSTBY_ACK = 135,
+ MX25_PAD_POWER_FAIL = 136,
+ MX25_PAD_CLKO = 137,
+ MX25_PAD_BOOT_MODE0 = 138,
+ MX25_PAD_BOOT_MODE1 = 139,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = {
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE0),
+ IMX_PINCTRL_PIN(MX25_PAD_RESERVE1),
+ IMX_PINCTRL_PIN(MX25_PAD_A10),
+ IMX_PINCTRL_PIN(MX25_PAD_A13),
+ IMX_PINCTRL_PIN(MX25_PAD_A14),
+ IMX_PINCTRL_PIN(MX25_PAD_A15),
+ IMX_PINCTRL_PIN(MX25_PAD_A16),
+ IMX_PINCTRL_PIN(MX25_PAD_A17),
+ IMX_PINCTRL_PIN(MX25_PAD_A18),
+ IMX_PINCTRL_PIN(MX25_PAD_A19),
+ IMX_PINCTRL_PIN(MX25_PAD_A20),
+ IMX_PINCTRL_PIN(MX25_PAD_A21),
+ IMX_PINCTRL_PIN(MX25_PAD_A22),
+ IMX_PINCTRL_PIN(MX25_PAD_A23),
+ IMX_PINCTRL_PIN(MX25_PAD_A24),
+ IMX_PINCTRL_PIN(MX25_PAD_A25),
+ IMX_PINCTRL_PIN(MX25_PAD_EB0),
+ IMX_PINCTRL_PIN(MX25_PAD_EB1),
+ IMX_PINCTRL_PIN(MX25_PAD_OE),
+ IMX_PINCTRL_PIN(MX25_PAD_CS0),
+ IMX_PINCTRL_PIN(MX25_PAD_CS1),
+ IMX_PINCTRL_PIN(MX25_PAD_CS4),
+ IMX_PINCTRL_PIN(MX25_PAD_CS5),
+ IMX_PINCTRL_PIN(MX25_PAD_NF_CE0),
+ IMX_PINCTRL_PIN(MX25_PAD_ECB),
+ IMX_PINCTRL_PIN(MX25_PAD_LBA),
+ IMX_PINCTRL_PIN(MX25_PAD_BCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_RW),
+ IMX_PINCTRL_PIN(MX25_PAD_NFWE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFRE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFALE),
+ IMX_PINCTRL_PIN(MX25_PAD_NFCLE),
+ IMX_PINCTRL_PIN(MX25_PAD_NFWP_B),
+ IMX_PINCTRL_PIN(MX25_PAD_NFRB),
+ IMX_PINCTRL_PIN(MX25_PAD_D15),
+ IMX_PINCTRL_PIN(MX25_PAD_D14),
+ IMX_PINCTRL_PIN(MX25_PAD_D13),
+ IMX_PINCTRL_PIN(MX25_PAD_D12),
+ IMX_PINCTRL_PIN(MX25_PAD_D11),
+ IMX_PINCTRL_PIN(MX25_PAD_D10),
+ IMX_PINCTRL_PIN(MX25_PAD_D9),
+ IMX_PINCTRL_PIN(MX25_PAD_D8),
+ IMX_PINCTRL_PIN(MX25_PAD_D7),
+ IMX_PINCTRL_PIN(MX25_PAD_D6),
+ IMX_PINCTRL_PIN(MX25_PAD_D5),
+ IMX_PINCTRL_PIN(MX25_PAD_D4),
+ IMX_PINCTRL_PIN(MX25_PAD_D3),
+ IMX_PINCTRL_PIN(MX25_PAD_D2),
+ IMX_PINCTRL_PIN(MX25_PAD_D1),
+ IMX_PINCTRL_PIN(MX25_PAD_D0),
+ IMX_PINCTRL_PIN(MX25_PAD_LD0),
+ IMX_PINCTRL_PIN(MX25_PAD_LD1),
+ IMX_PINCTRL_PIN(MX25_PAD_LD2),
+ IMX_PINCTRL_PIN(MX25_PAD_LD3),
+ IMX_PINCTRL_PIN(MX25_PAD_LD4),
+ IMX_PINCTRL_PIN(MX25_PAD_LD5),
+ IMX_PINCTRL_PIN(MX25_PAD_LD6),
+ IMX_PINCTRL_PIN(MX25_PAD_LD7),
+ IMX_PINCTRL_PIN(MX25_PAD_LD8),
+ IMX_PINCTRL_PIN(MX25_PAD_LD9),
+ IMX_PINCTRL_PIN(MX25_PAD_LD10),
+ IMX_PINCTRL_PIN(MX25_PAD_LD11),
+ IMX_PINCTRL_PIN(MX25_PAD_LD12),
+ IMX_PINCTRL_PIN(MX25_PAD_LD13),
+ IMX_PINCTRL_PIN(MX25_PAD_LD14),
+ IMX_PINCTRL_PIN(MX25_PAD_LD15),
+ IMX_PINCTRL_PIN(MX25_PAD_HSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_VSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_LSCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_OE_ACD),
+ IMX_PINCTRL_PIN(MX25_PAD_CONTRAST),
+ IMX_PINCTRL_PIN(MX25_PAD_PWM),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D2),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D3),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D4),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D5),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D6),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D7),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D8),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_D9),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_MCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_VSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_HSYNC),
+ IMX_PINCTRL_PIN(MX25_PAD_CSI_PIXCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_I2C1_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_I2C1_DAT),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MOSI),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MISO),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS0),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS1),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_CSPI1_RDY),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_RXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_TXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_RTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART1_CTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_RXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_TXD),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_RTS),
+ IMX_PINCTRL_PIN(MX25_PAD_UART2_CTS),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_CMD),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA2),
+ IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA3),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW0),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW1),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW2),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW3),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL0),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL1),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL2),
+ IMX_PINCTRL_PIN(MX25_PAD_KPP_COL3),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_MDC),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_MDIO),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_EN),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA0),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA1),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_RX_DV),
+ IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_CLK),
+ IMX_PINCTRL_PIN(MX25_PAD_RTCK),
+ IMX_PINCTRL_PIN(MX25_PAD_DE_B),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_A),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_B),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_C),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_D),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_E),
+ IMX_PINCTRL_PIN(MX25_PAD_GPIO_F),
+ IMX_PINCTRL_PIN(MX25_PAD_EXT_ARMCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_UPLL_BYPCLK),
+ IMX_PINCTRL_PIN(MX25_PAD_VSTBY_REQ),
+ IMX_PINCTRL_PIN(MX25_PAD_VSTBY_ACK),
+ IMX_PINCTRL_PIN(MX25_PAD_POWER_FAIL),
+ IMX_PINCTRL_PIN(MX25_PAD_CLKO),
+ IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE0),
+ IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE1),
+};
+
+static struct imx_pinctrl_soc_info imx25_pinctrl_info = {
+ .pins = imx25_pinctrl_pads,
+ .npins = ARRAY_SIZE(imx25_pinctrl_pads),
+};
+
+static struct of_device_id imx25_pinctrl_of_match[] = {
+ { .compatible = "fsl,imx25-iomuxc", },
+ { /* sentinel */ }
+};
+
+static int imx25_pinctrl_probe(struct platform_device *pdev)
+{
+ return imx_pinctrl_probe(pdev, &imx25_pinctrl_info);
+}
+
+static struct platform_driver imx25_pinctrl_driver = {
+ .driver = {
+ .name = "imx25-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(imx25_pinctrl_of_match),
+ },
+ .probe = imx25_pinctrl_probe,
+ .remove = imx_pinctrl_remove,
+};
+
+static int __init imx25_pinctrl_init(void)
+{
+ return platform_driver_register(&imx25_pinctrl_driver);
+}
+arch_initcall(imx25_pinctrl_init);
+
+static void __exit imx25_pinctrl_exit(void)
+{
+ platform_driver_unregister(&imx25_pinctrl_driver);
+}
+module_exit(imx25_pinctrl_exit);
+MODULE_AUTHOR("Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>");
+MODULE_DESCRIPTION("Freescale IMX25 pinctrl driver");
+MODULE_LICENSE("GPL v2");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCHv3][ 10/11] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
[not found] ` <1382109422-24454-1-git-send-email-denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
` (6 preceding siblings ...)
2013-10-18 15:17 ` [PATCHv3][ 09/11] ARM: dts: imx25.dtsi: Add an alias for the Audio Multiplexer Denis Carikli
@ 2013-10-18 15:17 ` Denis Carikli
7 siblings, 0 replies; 9+ messages in thread
From: Denis Carikli @ 2013-10-18 15:17 UTC (permalink / raw)
To: Sascha Hauer
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
Eric Bénard, Denis Carikli, Rob Herring, Pawel Moll,
Mark Rutland, Stephen Warren, Ian Campbell,
devicetree-u79uwXL29TY76Z2rM5mHXA
The following devices/functionalities were added:
* Main and secondary UARTs.
* i2c and the pcf8563 device.
* Sound.
* CMO-QVGA(With backlight), DVI-VGA and DVI-SVGA displays
* Ethernet.
* NAND.
* The BP1 button.
* The LED.
* Watchdog
* SD.
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi | 53 +++++++++
.../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 63 +++++++++++
.../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts | 50 +++++++++
.../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts | 50 +++++++++
.../boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts | 116 ++++++++++++++++++++
5 files changed, 332 insertions(+)
create mode 100644 arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 0000000..0cc7864
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX25";
+ compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x4000000>; /* 64M */
+ };
+};
+
+&fec {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..cabd6f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ cmo_qvga: display {
+ model = "CMO-QVGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xcad08b80>;
+ bus-width = <18>;
+ native-mode = <&qvga_timings>;
+ display-timings {
+ qvga_timings: 320x240 {
+ clock-frequency = <6500000>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <30>;
+ hfront-porch = <38>;
+ vback-porch = <20>;
+ vfront-porch = <3>;
+ hsync-len = <15>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ reg_lcd_3v3: lcd-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 26 0>;
+ enable-active-high;
+ };
+};
+
+&lcdc {
+ display = <&cmo_qvga>;
+ fsl,pwmr = <0x00a903ff>;
+ lcd-supply = <®_lcd_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..1089ac2
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ dvi_svga: display {
+ model = "DVI-SVGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&dvi_svga_timings>;
+ display-timings {
+ dvi_svga_timings: 800x600 {
+ clock-frequency = <40000000>;
+ hactive = <800>;
+ vactive = <600>;
+ hback-porch = <75>;
+ hfront-porch = <75>;
+ vback-porch = <7>;
+ vfront-porch = <75>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ display = <&dvi_svga>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..2edbbab
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+ model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+ compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ dvi_vga: display {
+ model = "DVI-VGA";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&dvi_vga_timings>;
+ display-timings {
+ dvi_vga_timings: 640x480 {
+ clock-frequency = <31250000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <100>;
+ hfront-porch = <100>;
+ vback-porch = <7>;
+ vfront-porch = <100>;
+ hsync-len = <7>;
+ vsync-len = <7>;
+ };
+ };
+ };
+};
+
+&lcdc {
+ display = <&dvi_vga>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 0000000..be24a85
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+ model = "Eukrea MBIMXSD25";
+ compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 18 1>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 19 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
+ cd-gpios = <&gpio1 20>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ gpio_keys {
+ pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+ fsl,pins = <
+ MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000
+ >;
+ };
+ };
+
+ leds {
+ pinctrl_gpioled: gpioledgrp-1 {
+ fsl,pins = <
+ MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000
+ >;
+ };
+ };
+
+ reg_lcd_3v3 {
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <
+ MX25_PAD_PWM__GPIO_1_26 0x80000000
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 9+ messages in thread