[PATCHv3] video: backlight: gpio-backlight: Add DT support.

[PATCHv3] video: backlight: gpio-backlight: Add DT support.

[Denis Carikli]

Cc: Richard Purdie <rpurdie-Fm38FmjxZ/leoWH0uzbU5w@public.gmane.org>
Cc: Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Lothar Waßmann <LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v2->v3:
- The dev_err are not split between multiples lines anymore, in order to
  improve grepping. Thanks to Lothar Waßmann for the advise.
---
 .../bindings/video/backlight/gpio-backlight.txt    |   18 +++++
 drivers/video/backlight/gpio_backlight.c           |   72 ++++++++++++++++++--
 2 files changed, 83 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt

diff --git a/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
new file mode 100644
index 0000000..362dd40
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
@@ -0,0 +1,18 @@
+gpio-backlight bindings
+
+Required properties:
+  - compatible: "gpio-backlight"
+  - gpios: describes the gpio that is used for enabling/disabling the backlight
+     (see GPIO binding[0] for more details).
+  - default-brightness-level: the default brightness level (can be 0(off) or
+      1(on) since GPIOs only support theses levels).
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+	backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 0>;
+		default-brightness-level = <1>;
+	};
diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
index 81fb127..3bf38a0 100644
--- a/drivers/video/backlight/gpio_backlight.c
+++ b/drivers/video/backlight/gpio_backlight.c
@@ -13,6 +13,8 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -23,6 +25,7 @@ struct gpio_backlight {
 
 	int gpio;
 	int active;
+	int def_value;
 };
 
 static int gpio_backlight_update_status(struct backlight_device *bl)
@@ -60,6 +63,42 @@ static const struct backlight_ops gpio_backlight_ops = {
 	.check_fb	= gpio_backlight_check_fb,
 };
 
+static int gpio_backlight_probe_dt(struct platform_device *pdev,
+				   struct gpio_backlight *gbl)
+{
+	struct device_node *np = pdev->dev.of_node;
+	enum of_gpio_flags gpio_flags;
+	int ret;
+
+	gbl->fbdev = NULL;
+	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
+
+	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
+
+	if (gbl->gpio == -EPROBE_DEFER) {
+		return ERR_PTR(-EPROBE_DEFER);
+	} else if (gbl->gpio < 0) {
+		dev_err(&pdev->dev, "Error: gpios is a required parameter.\n");
+		return gbl->gpio;
+	}
+
+	ret = of_property_read_u32(np, "default-brightness-level",
+				   &gbl->def_value);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Error: default-brightness-level is a required parameter.\n");
+		return ret;
+	}
+
+	if (gbl->def_value < 0 || gbl->def_value > 1) {
+		dev_err(&pdev->dev,
+			"Error: Invalid default-brightness-level value. Its value can be either 0(off) or 1(on).\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int gpio_backlight_probe(struct platform_device *pdev)
 {
 	struct gpio_backlight_platform_data *pdata =
@@ -67,10 +106,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct gpio_backlight *gbl;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
-	if (!pdata) {
-		dev_err(&pdev->dev, "failed to find platform data\n");
+	if (!pdata && !np) {
+		dev_err(&pdev->dev,
+			"failed to find platform data or device tree node.\n");
 		return -ENODEV;
 	}
 
@@ -79,14 +120,21 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	gbl->dev = &pdev->dev;
-	gbl->fbdev = pdata->fbdev;
-	gbl->gpio = pdata->gpio;
-	gbl->active = pdata->active_low ? 0 : 1;
+
+	if (np) {
+		ret = gpio_backlight_probe_dt(pdev, gbl);
+		if (ret)
+			return ret;
+	} else {
+		gbl->fbdev = pdata->fbdev;
+		gbl->gpio = pdata->gpio;
+		gbl->active = pdata->active_low ? 0 : 1;
+	}
 
 	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
 				    (gbl->active ? GPIOF_INIT_LOW
 						 : GPIOF_INIT_HIGH),
-				    pdata->name);
+				    pdata ? pdata->name : "backlight");
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to request GPIO\n");
 		return ret;
@@ -103,17 +151,27 @@ static int gpio_backlight_probe(struct platform_device *pdev)
 		return PTR_ERR(bl);
 	}
 
-	bl->props.brightness = pdata->def_value;
+	if (np)
+		bl->props.brightness = gbl->def_value;
+	else
+		bl->props.brightness = pdata->def_value;
+
 	backlight_update_status(bl);
 
 	platform_set_drvdata(pdev, bl);
 	return 0;
 }
 
+static struct of_device_id gpio_backlight_of_match[] = {
+	{ .compatible = "gpio-backlight" },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver gpio_backlight_driver = {
 	.driver		= {
 		.name		= "gpio-backlight",
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(gpio_backlight_of_match),
 	},
 	.probe		= gpio_backlight_probe,
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3] video: backlight: gpio-backlight: Add DT support.

[Jean-Christophe PLAGNIOL-VILLARD]

On 19:10 Fri 18 Oct     , Denis Carikli wrote:
> Cc: Richard Purdie <rpurdie@rpsys.net>
> Cc: Jingoo Han <jg1.han@samsung.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Lothar Waßmann <LW@KARO-electronics.de>
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> ---
> ChangeLog v2->v3:
> - The dev_err are not split between multiples lines anymore, in order to
>   improve grepping. Thanks to Lothar Waßmann for the advise.
> ---
>  .../bindings/video/backlight/gpio-backlight.txt    |   18 +++++
>  drivers/video/backlight/gpio_backlight.c           |   72 ++++++++++++++++++--
>  2 files changed, 83 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
> new file mode 100644
> index 0000000..362dd40
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt
> @@ -0,0 +1,18 @@
> +gpio-backlight bindings
> +
> +Required properties:
> +  - compatible: "gpio-backlight"
> +  - gpios: describes the gpio that is used for enabling/disabling the backlight
> +     (see GPIO binding[0] for more details).
> +  - default-brightness-level: the default brightness level (can be 0(off) or
> +      1(on) since GPIOs only support theses levels).
> +
> +[0]: Documentation/devicetree/bindings/gpio/gpio.txt
> +
> +Example:
> +
> +	backlight {
> +		compatible = "gpio-backlight";
> +		gpios = <&gpio3 4 0>;
> +		default-brightness-level = <1>;
why mandatory if optionnal put 0
> +	};
> diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c
> index 81fb127..3bf38a0 100644
> --- a/drivers/video/backlight/gpio_backlight.c
> +++ b/drivers/video/backlight/gpio_backlight.c
> @@ -13,6 +13,8 @@
>  #include <linux/init.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
>  #include <linux/platform_data/gpio_backlight.h>
>  #include <linux/platform_device.h>
>  #include <linux/slab.h>
> @@ -23,6 +25,7 @@ struct gpio_backlight {
>  
>  	int gpio;
>  	int active;
> +	int def_value;
>  };
>  
>  static int gpio_backlight_update_status(struct backlight_device *bl)
> @@ -60,6 +63,42 @@ static const struct backlight_ops gpio_backlight_ops = {
>  	.check_fb	= gpio_backlight_check_fb,
>  };
>  
> +static int gpio_backlight_probe_dt(struct platform_device *pdev,
> +				   struct gpio_backlight *gbl)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	enum of_gpio_flags gpio_flags;
> +	int ret;
> +
> +	gbl->fbdev = NULL;
> +	gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
> +
> +	gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
> +
> +	if (gbl->gpio == -EPROBE_DEFER) {
> +		return ERR_PTR(-EPROBE_DEFER);
> +	} else if (gbl->gpio < 0) {
> +		dev_err(&pdev->dev, "Error: gpios is a required parameter.\n");
> +		return gbl->gpio;
> +	}
> +
> +	ret = of_property_read_u32(np, "default-brightness-level",
> +				   &gbl->def_value);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev,
> +			"Error: default-brightness-level is a required parameter.\n");
> +		return ret;
> +	}
> +
> +	if (gbl->def_value < 0 || gbl->def_value > 1) {
> +		dev_err(&pdev->dev,
> +			"Error: Invalid default-brightness-level value. Its value can be either 0(off) or 1(on).\n");
> +		return -EINVAL;
> +	}

if > 1 force 1 and report a warning
> +
> +	return 0;
> +}
> +
>  static int gpio_backlight_probe(struct platform_device *pdev)
>  {
>  	struct gpio_backlight_platform_data *pdata =
> @@ -67,10 +106,12 @@ static int gpio_backlight_probe(struct platform_device *pdev)
>  	struct backlight_properties props;
>  	struct backlight_device *bl;
>  	struct gpio_backlight *gbl;
> +	struct device_node *np = pdev->dev.of_node;
>  	int ret;
>  
> -	if (!pdata) {
> -		dev_err(&pdev->dev, "failed to find platform data\n");
> +	if (!pdata && !np) {
> +		dev_err(&pdev->dev,
> +			"failed to find platform data or device tree node.\n");
>  		return -ENODEV;
>  	}
>  
> @@ -79,14 +120,21 @@ static int gpio_backlight_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	gbl->dev = &pdev->dev;
> -	gbl->fbdev = pdata->fbdev;
> -	gbl->gpio = pdata->gpio;
> -	gbl->active = pdata->active_low ? 0 : 1;
> +
> +	if (np) {
> +		ret = gpio_backlight_probe_dt(pdev, gbl);
> +		if (ret)
> +			return ret;
> +	} else {
> +		gbl->fbdev = pdata->fbdev;
> +		gbl->gpio = pdata->gpio;
> +		gbl->active = pdata->active_low ? 0 : 1;
store the default value here
		gbl->def_value = pdata->def_value;
> +	}

after here you does not need to care if it's dt or not
>  
>  	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
>  				    (gbl->active ? GPIOF_INIT_LOW
>  						 : GPIOF_INIT_HIGH),
> -				    pdata->name);
> +				    pdata ? pdata->name : "backlight");
>  	if (ret < 0) {
>  		dev_err(&pdev->dev, "unable to request GPIO\n");
>  		return ret;
> @@ -103,17 +151,27 @@ static int gpio_backlight_probe(struct platform_device *pdev)
>  		return PTR_ERR(bl);
>  	}
>  
> -	bl->props.brightness = pdata->def_value;
> +	if (np)
> +		bl->props.brightness = gbl->def_value;
> +	else
> +		bl->props.brightness = pdata->def_value;
	so no need to check np again here
> +
>  	backlight_update_status(bl);
>  
>  	platform_set_drvdata(pdev, bl);
>  	return 0;
>  }
>  
> +static struct of_device_id gpio_backlight_of_match[] = {
> +	{ .compatible = "gpio-backlight" },
> +	{ /* sentinel */ }
> +};
> +
>  static struct platform_driver gpio_backlight_driver = {
>  	.driver		= {
>  		.name		= "gpio-backlight",
>  		.owner		= THIS_MODULE,
> +		.of_match_table = of_match_ptr(gpio_backlight_of_match),
>  	},
>  	.probe		= gpio_backlight_probe,
>  };
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel