From: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
To: balbi-l0cyMroinI0@public.gmane.org,
shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
marex-ynQEQJNshbs@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [Patch v2 02/14] usb: phy-mxs: Add platform judgement code
Date: Tue, 22 Oct 2013 13:58:36 +0800 [thread overview]
Message-ID: <1382421528-17897-3-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1382421528-17897-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
The mxs-phy has three versions until now, each versions have
some differences among PHY operations. the 1st version is
for mx23/mx28 SoC, The 2nd version is for mx6q and mx6dl, the
3rd version is for mx6sl and later mx6 platform.
Signed-off-by: Peter Chen <peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
---
drivers/usb/phy/phy-mxs-usb.c | 65 ++++++++++++++++++++++++++++++++++++-----
1 files changed, 57 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index fdd33b4..a0628d6 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
* Copyright (C) 2012 Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
* on behalf of DENX Software Engineering GmbH
*
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/of_device.h>
#define DRIVER_NAME "mxs_phy"
@@ -34,12 +35,57 @@
#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+enum imx_phy_type {
+ IMX6Q_USB_PHY,
+ IMX6SL_USB_PHY,
+ IMX23_USB_PHY,
+};
+
struct mxs_phy {
struct usb_phy phy;
struct clk *clk;
+ enum imx_phy_type devtype;
};
-#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+static inline int is_mx6q_phy(struct mxs_phy *data)
+{
+ return data->devtype == IMX6Q_USB_PHY;
+}
+
+static inline int is_mx6sl_phy(struct mxs_phy *data)
+{
+ return data->devtype == IMX6SL_USB_PHY;
+}
+
+static inline int is_mx23_phy(struct mxs_phy *data)
+{
+ return data->devtype == IMX23_USB_PHY;
+}
+
+static struct platform_device_id imx_phy_devtype[] = {
+ {
+ .name = "usb-phy-imx6q",
+ .driver_data = IMX6Q_USB_PHY,
+ }, {
+ .name = "usb-phy-imx6sl",
+ .driver_data = IMX6SL_USB_PHY,
+ }, {
+ .name = "usb-phy-imx23",
+ .driver_data = IMX23_USB_PHY,
+ }, {
+ /* sentinel */
+ }
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+ { .compatible = "fsl,imx6q-usbphy", .data = &imx_phy_devtype[IMX6Q_USB_PHY], },
+ { .compatible = "fsl,imx6sl-usbphy", .data = &imx_phy_devtype[IMX6SL_USB_PHY], },
+ { .compatible = "fsl,imx23-usbphy", .data = &imx_phy_devtype[IMX23_USB_PHY], },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
{
@@ -131,6 +177,14 @@ static int mxs_phy_probe(struct platform_device *pdev)
struct clk *clk;
struct mxs_phy *mxs_phy;
int ret;
+ const struct of_device_id *of_id =
+ of_match_device(mxs_phy_dt_ids, &pdev->dev);
+
+ /* This driver is DT-only version now */
+ if (!of_id)
+ return -ENXIO;
+
+ pdev->id_entry = of_id->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
@@ -163,6 +217,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
mxs_phy->clk = clk;
+ mxs_phy->devtype = pdev->id_entry->driver_data;
platform_set_drvdata(pdev, &mxs_phy->phy);
@@ -182,12 +237,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id mxs_phy_dt_ids[] = {
- { .compatible = "fsl,imx23-usbphy", },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
next prev parent reply other threads:[~2013-10-22 5:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 5:58 [Patch v2 00/14] Add power management support for MXS PHY Peter Chen
2013-10-22 5:58 ` [Patch v2 01/14] usb: doc: phy-mxs: Add more compatible strings Peter Chen
2013-10-23 2:58 ` Shawn Guo
[not found] ` <1382421528-17897-2-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-10-23 5:56 ` Shawn Guo
2013-10-23 6:17 ` Peter Chen
[not found] ` <1382421528-17897-1-git-send-email-peter.chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2013-10-22 5:58 ` Peter Chen [this message]
2013-10-23 6:13 ` [Patch v2 02/14] usb: phy-mxs: Add platform judgement code Shawn Guo
2013-10-23 6:46 ` Peter Chen
2013-10-23 9:04 ` Shawn Guo
2013-10-23 8:55 ` Peter Chen
2013-10-22 5:58 ` [Patch v2 05/14] ARM: dts: imx6: add anatop phandle for usbphy Peter Chen
2013-10-22 5:58 ` [Patch v2 08/14] usb: phy-mxs: Add implementation of nofity_suspend and notify_resume Peter Chen
2013-10-22 5:58 ` [Patch v2 11/14] ARM: dts: imx6: Add disconnect-line-without-vbus property for usbphy Peter Chen
2013-10-22 5:58 ` [Patch v2 03/14] usb: phy-mxs: Add auto clock and power setting Peter Chen
2013-10-22 5:58 ` [Patch v2 04/14] usb: doc: phy-mxs: update binding for adding anatop phandle Peter Chen
2013-10-22 5:58 ` [Patch v2 06/14] usb: phy-mxs: Add anatop regmap Peter Chen
2013-10-22 5:58 ` [Patch v2 07/14] usb: phy: add notify suspend and resume callback Peter Chen
2013-10-22 5:58 ` [Patch v2 09/14] usb: phy-mxs: Enable IC fixes for mx6 SoC serial Peter Chen
2013-10-22 5:58 ` [Patch v2 10/14] usb: doc: phy-mxs: update binding for adding disconnect line property Peter Chen
2013-10-23 6:31 ` Shawn Guo
2013-10-23 6:49 ` Peter Chen
2013-10-23 7:08 ` Peter Chen
2013-10-23 8:44 ` Shawn Guo
2013-10-22 5:58 ` [Patch v2 12/14] usb: phy: Add set_wakeup API Peter Chen
2013-10-22 5:58 ` [Patch v2 13/14] usb: phy-mxs: Add implementation of set_wakeup Peter Chen
2013-10-23 6:35 ` Shawn Guo
2013-10-23 6:54 ` Peter Chen
2013-10-22 5:58 ` [Patch v2 14/14] usb: phy-mxs: Add system suspend/resume API Peter Chen
2013-10-22 9:29 ` [Patch v2 00/14] Add power management support for MXS PHY Peter Chen
2013-10-28 8:20 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382421528-17897-3-git-send-email-peter.chen@freescale.com \
--to=peter.chen-kzfg59tc24xl57midrcfdg@public.gmane.org \
--cc=alexander.shishkin-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=frank.li-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=m.grzeschik-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).