From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Reichel Subject: [PATCH 05/14] DTS: ARM: OMAP3-N900: GPIO key definitions Date: Wed, 23 Oct 2013 00:49:34 +0200 Message-ID: <1382482183-14426-6-git-send-email-sre@debian.org> References: <1382482183-14426-1-git-send-email-sre@debian.org> Return-path: In-Reply-To: <1382482183-14426-1-git-send-email-sre@debian.org> Sender: linux-kernel-owner@vger.kernel.org To: =?UTF-8?q?Beno=C3=AEt=20Cousson?= , Tony Lindgren Cc: linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel List-Id: devicetree@vger.kernel.org Add device tree node for the GPIO keys provided by the N900 board. This is a simple conversion of the existing board code. Signed-off-by: Sebastian Reichel --- arch/arm/boot/dts/omap3-n900.dts | 48 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 01a437e..5082cb6 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -26,6 +26,54 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + gpio_keys { + compatible = "gpio-keys"; + + camera_lens_cover { + label = "Camera Lens Cover"; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */ + gpio-key,wakeup; + }; + + camera_focus { + label = "Camera Focus"; + gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */ + linux,code = <0x210>; /* KEY_CAMERA_FOCUS */ + gpio-key,wakeup; + }; + + camera_capture { + label = "Camera Capture"; + gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */ + linux,code = <0xd4>; /* KEY_CAMERA */ + gpio-key,wakeup; + }; + + lock_button { + label = "Lock Button"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */ + linux,code = <0x98>; /* KEY_SCREENLOCK */ + gpio-key,wakeup; + }; + + keypad_slide { + label = "Keypad Slide"; + gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */ + gpio-key,wakeup; + }; + + proximity_sensor { + label = "Proximity Sensor"; + gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */ + }; + }; + }; &omap3_pmx_core { -- 1.8.4.rc3