From: Pekon Gupta <pekon@ti.com>
To: mark.rutland@arm.com, olof@lixom.net,
computersforpeace@gmail.com, dedekind1@gmail.com
Cc: robherring2@gmail.com, Pawel.Moll@arm.com,
ijc+devicetree@hellion.org.uk, swarren@wwwdotorg.org,
dwmw2@infradead.org, arnd@arndb.de, tony@atomide.com,
bcousson@baylibre.com, avinashphilipk@gmail.com, balbi@ti.com,
linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
devicetree@vger.kernel.org, jp.francois@cynove.com,
ivan.djelic@parrot.com, Pekon Gupta <pekon@ti.com>
Subject: [PATCH v11 08/10] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt
Date: Thu, 24 Oct 2013 18:20:24 +0530 [thread overview]
Message-ID: <1382619026-4182-9-git-send-email-pekon@ti.com> (raw)
In-Reply-To: <1382619026-4182-1-git-send-email-pekon@ti.com>
Updated DTS to replace deprecated binding with newer values
Refer: Documentation/devicetree/bindings/mtd/gpmc-nand.txt
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 3 +--
arch/arm/boot/dts/omap3430-sdp.dts | 2 +-
2 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index e8ec875..1aee6ac 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -269,7 +269,6 @@
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
- gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
@@ -296,7 +295,7 @@
#address-cells = <1>;
#size-cells = <1>;
- elm_id = <&elm>;
+ ti,elm-id = <&elm>;
/* MTD partition table */
partition@0 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bc..501f863 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -105,7 +105,7 @@
reg = <1 0 0x08000000>;
nand-bus-width = <8>;
- ti,nand-ecc-opt = "sw";
+ ti,nand-ecc-opt = "ham1";
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
--
1.8.1
next prev parent reply other threads:[~2013-10-24 12:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 12:50 [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 01/10] ARM: OMAP2+: cleaned-up DT support of various " Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 02/10] mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 03/10] mtd: nand: omap: cleanup: replace local references with generic framework names Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 04/10] mtd: nand: omap: use DT specified bus-width only for scanning NAND device Pekon Gupta
2013-10-24 21:27 ` Ezequiel Garcia
2013-10-24 22:43 ` Brian Norris
2013-10-24 22:49 ` Ezequiel Garcia
2013-10-24 12:50 ` [PATCH v11 05/10] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 07/10] mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c Pekon Gupta
2013-10-24 12:50 ` Pekon Gupta [this message]
2013-10-24 12:50 ` [PATCH v11 09/10] mtd: nand: omap: updated devm_xx for all resource allocation and free calls Pekon Gupta
[not found] ` <1382619026-4182-1-git-send-email-pekon-l0cyMroinI0@public.gmane.org>
2013-10-24 12:50 ` [PATCH v11 06/10] mtd: nand: omap: clean-up ecc layout for BCH ecc schemes Pekon Gupta
2013-10-24 12:50 ` [PATCH v11 10/10] mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig Pekon Gupta
2013-10-24 13:52 ` [PATCH v11 00/10] [PATCH v10 00/10] mtd:nand:omap2: clean-up of supported ECC schemes Ezequiel Garcia
2013-10-30 3:59 ` Brian Norris
2013-10-30 9:16 ` Ezequiel Garcia
2013-10-30 21:30 ` Gupta, Pekon
2013-10-31 21:23 ` Tony Lindgren
2013-11-01 20:10 ` Gupta, Pekon
2013-10-25 10:56 ` Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382619026-4182-9-git-send-email-pekon@ti.com \
--to=pekon@ti.com \
--cc=Pawel.Moll@arm.com \
--cc=arnd@arndb.de \
--cc=avinashphilipk@gmail.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=computersforpeace@gmail.com \
--cc=dedekind1@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=ivan.djelic@parrot.com \
--cc=jp.francois@cynove.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=robherring2@gmail.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).