From: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org,
Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 1/2] ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
Date: Thu, 24 Oct 2013 21:07:13 +0200 [thread overview]
Message-ID: <1382641634-18187-2-git-send-email-lisovy@gmail.com> (raw)
In-Reply-To: <1382641634-18187-1-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Enable uart1, ecspi1, i2c1, FEC and PMIC
Signed-off-by: Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 0000000..84ce6e0
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Voipac i.MX53 X53-DMM-668";
+ compatible = "vp,imx53-dmm-668", "fsl,imx53";
+
+ memory@70000000 {
+ device_type = "memory";
+ reg = <0x70000000 0x20000000>;
+ };
+
+ memory@b0000000 {
+ device_type = "memory";
+ reg = <0xb0000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Make DA9053 regulator functional */
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+ /* FEC Power enable */
+ MX53_PAD_GPIO_11__GPIO4_1 0x80000000
+ /* FEC RST */
+ MX53_PAD_GPIO_12__GPIO4_2 0x80000000
+ >;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <4>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 2 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_2>;
+ status = "okay";
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa", "dlg,da9052";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "BUCKCORE";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "BUCKPRO";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "BUCKMEM";
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1580000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-name = "BUCKPERI";
+ regulator-min-microvolt = <2370000>;
+ regulator-max-microvolt = <2630000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4_2v775";
+ regulator-min-microvolt = <2770000>;
+ regulator-max-microvolt = <2780000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7_2v75";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8_1v8";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9_1v5";
+ regulator-min-microvolt = <1450000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-name = "ldo10_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ status = "okay";
+};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-10-24 19:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 19:07 [PATCH 0/2 v2] Devicetree description for Voipac i.MX53 module Rostislav Lisovy
[not found] ` <1382641634-18187-1-git-send-email-lisovy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-10-24 19:07 ` Rostislav Lisovy [this message]
2013-10-24 19:07 ` [PATCH 2/2] ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module Rostislav Lisovy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382641634-18187-2-git-send-email-lisovy@gmail.com \
--to=lisovy-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=pisa-/N2ztlQkxE7Ub/6JBqosbQ@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).